NLG Lampen freezing after PAN Broadcast

[yonz2]

When running in the same room as Apple Homepod Mini the NLG Lamps stop working.

Here is a WireShark Capture file, showing all Zigbee messages on a small dedicated ZIGBEE network (one NLG Device)
NLG-Overnite.pcapng.gz

Messages# 1 - 6612 : Left overnite after joining a single NLG Lamp. (Homepod device is unplugged)
Around time of Message# 6613 : Apple HomePod Mini (OS 16.3.1) is plugged in again
Message# 6643: The NLG Device is turned on
Message# 6656: The NLG Device is turned off
Message# 6753: Apple Homepod sends out a PAN Broadcast (Destination PAN 0xFFFF)
Message# 6907: NLG Device is not responding anymore
Around time of Message# 8040: Apple HomePod Mini is un-plugged again
Message# 8043: NLG Device is deleted and then re-joined to the Zigbee Network
Message# 8158: The NLG Device is turned on
Message# 8167: The NLG Device is turned off

Device information from Zigbee2MQTT:

Friendly name: 0xab910300e00bfdb0
Description:
Last seen: N/A
Availability: [Disabled](https://www.zigbee2mqtt.io/guide/configuration/device-availability.html#availability-advanced-configuration)
Device type: Router
Zigbee Mode: NLG-TW light
Zigbee Manufacturer: Neuhaus Lighting Group
Description: Various tunable white lights (e.g. 8195-55)
Support status: Supported

IEEE Address: 0xab910300e00bfdb0
Network address: 0x15D5
Firmware build date: 20210611
Firmware version: 1.0.6
Manufacturer: [Paul Neuhaus](https://www.zigbee2mqtt.io/supported-devices/#v=Paul%20Neuhaus)
Model: [NLG-TW light](https://www.zigbee2mqtt.io/devices/NLG-TW_light.html#paul%2520neuhaus-nlg-tw%2520light)
Power: Mains
Interview completed: True