Skip to content

Latest commit

 

History

History
119 lines (97 loc) · 6.56 KB

OIDsforSensorandTransciver.MD

File metadata and controls

119 lines (97 loc) · 6.56 KB
Raw

Sensor and Transceiver Info Monitoring Requirement

Overall Requirement

As shown in the following diagram, we need to collect sensor and transceiver infomation from SFP into Sonic database and then into snmpagent.

  • The new Xcvrd in platform monitor container should peroidally pull the new DOM sensor info to state DB. The finallized DB to be used to cache telemetry data is to be determined.

  • Xcvrd should monitor the interrupt of new sfp plg-in event. When an event is triggered, the transceiver info should be retrived and updated in DB. At the initial implemenation, we can peroidally pull the new transceiver info until the new interrput is implemented too in this project.

  • The snmpagent should subscribe to TRANSCEIVER keys in state DB and pull the sensor and transceiver info to SNMP MIBs when there is a change.

  • The initial implemenation can get the data requiued via the dictionary returned by port_eeprom_data_string_pretty() API in sfputil. The API retrieve all EEPROM data block for each interface and then parse the whole data block. A potential opmization is to add new API in sfputil, which just retrives and parses the necessary data via the correspoding offset and size.

alt text

Proposed State DB Schema

Keyname:  TRANSCEIVER_INFO:[InterfaceName]

Fields: Type, HardwareVersion, SerialNum, ManufactureName, ModelName

Example:

  • TRANSCEIVER_INFO|Ethernet0
    • Type: (transciever type) # E.g. Xcvr
    • HardwareVersion: A1
    • SerialNum: WW5062F
    • ManufactureName: FINISAR CORP
    • ModelName: FCBN410QD3C02

Keyname: TRANSCEIVER_DOM_SENSOR:[InterfaceName]

Fields: Raw sendor values

Example:

  • TRANSCEIVER_DOM_SENSOR|Ethernet0
    • Temperature: rawdata
    • Voltage: rawdata
    • RX1Power: rawdata # in dbm
    • RX2Power: rawdata
    • RX3Power: rawdata
    • RX4Power: rawdata
    • TX1Bias: rawdata # in mA
    • TX2Bias: rawdata
    • TX3Bias: rawdata
    • TX4Bias: rawdata
    • TX1Power: rawdata # in dbm
    • TX2Power: rawdata
    • TX3Power: rawdata
    • TX4Power: rawdata

Transceiver requirements (ENTITY-MIB)

OID SNMP counter Where to get the info in Sonic. Example:
1.3.6.1.2.1.47.1.1.1 entPhysicalTable
1.3.6.1.2.1.47.1.1.1.1 entPhysicalEntry
1.3.6.1.2.1.47.1.1.1.1.2. index entPhysicalDescr Show interfaces alias Xcvr for Ethernet29
1.3.6.1.2.1.47.1.1.1.1.7. index entPhysicalName skipped ""
1.3.6.1.2.1.47.1.1.1.1.8. index entPhysicalHardwareVersion Vendor Rev in CLI or sfputil A1
1.3.6.1.2.1.47.1.1.1.1.9. index entPhysicalFirmwareVersion Skipped ""
1.3.6.1.2.1.47.1.1.1.1.10.index entPhysicalSoftwareRevision Skipped ""
1.3.6.1.2.1.47.1.1.1.1.11.index entPhysicalSerialNum Vendor SN in CLI or sfputil WW5062F
1.3.6.1.2.1.47.1.1.1.1.12.index entPhysicalMfgName Vendor Name in CLI or sfputil FINISAR CORP
1.3.6.1.2.1.47.1.1.1.1.13.index entPhysicalModelName Vendor PN in CLI or sfputil FCBN410QD3C02

ifindex is the ifindex in https://github.com/Azure/sonic-py-swsssdk/blob/master/src/swsssdk/port_util.py#L19

Interface Proposed index to use
Ethernet[X] Ifindex * 1000
  • An example as reference (assume that interface Ethernet100's alias is Ethernet29) :
OID SNMP counter Value
1.3.6.1.2.1.47.1.1.1 entPhysicalTable
1.3.6.1.2.1.47.1.1.1.1 entPhysicalEntry
1.3.6.1.2.1.47.1.1.1.1.2.101000 entPhysicalDescr Xcvr for Ethernet29
1.3.6.1.2.1.47.1.1.1.1.7.101000 entPhysicalName
1.3.6.1.2.1.47.1.1.1.1.8.101000 entPhysicalHardwareVersion A
1.3.6.1.2.1.47.1.1.1.1.9.101000 entPhysicalFirmwareVersion
1.3.6.1.2.1.47.1.1.1.1.10.101000 entPhysicalSoftwareRevision
1.3.6.1.2.1.47.1.1.1.1.11.101000 entPhysicalSerialNum 40714F20112
1.3.6.1.2.1.47.1.1.1.1.12.101000 entPhysicalMfgName AOI
1.3.6.1.2.1.47.1.1.1.1.13.101000 entPhysicalModelName AQOA9N09ADLN0720

Sensor requirements (ENTITY-SENSOR-MIB)

OID SNMP counter Where to get the info in Sonic. Example:
1.3.6.1.2.1.99.1.1 entPhySensorTable
1.3.6.1.2.1.99.1.1.1 entPhySensorEntry
1.3.6.1.2.1.99.1.1.1.1.index entPhySensorType In CLI: E.g.RX1Power: -0.97dBm 6
1.3.6.1.2.1.99.1.1.1.2.index entPhySensorScale Same as above 8
1.3.6.1.2.1.99.1.1.1.3.index entPhySensorPrecision Same as above 4
1.3.6.1.2.1.99.1.1.1.4.index entPhySensorValue Same as above 7998
1.3.6.1.2.1.47.1.1.1.1.2.index entPhysicalDescr Show interfaces alias DOM RX Power Sensor for DOM RX Power Sensor for Ethernet29/1
  • All sensors to be added in MIB and the index to use:
Sensor to collect Proposed index to use
DOM RX Power Sensor for Ethernet[X]/[LANEID] Ifindex * 1000 + LANEID * 10 + 1
DOM TX Bias Sensor for Ethernet[X]/[LANEID] Ifindex * 1000 + LANEID * 10 + 2
DOM TX Power Sensor for Ethernet[X]/[LANEID] Ifindex * 1000 + LANEID * 10 + 3
DOM Temperature Sensor for Ethernet[X] Ifindex * 1000 + 1
DOM Voltage Sensor for Ethernet[X] Ifindex * 1000 + 2
  • An example as reference:
OID SNMP counter Sensor 1 RX Power Sensor 2 TX Bias Sensor Sensor 3 Temperature Sensor 4 Voltage
1.3.6.1.2.1.99.1.1 entPhySensorTable
1.3.6.1.2.1.99.1.1.1 entPhySensorEntry
Raw values in command output for DOM -0.97dBm 4.44mA 25.39 3.37 Volts
Index used 101011 101012 101001 101002
1.3.6.1.2.1.99.1.1.1.1.index entPhySensorType 6 (i.e. watts according to EntitySensorDataType) 5 (i.e. amperes according to EntitySensorDataType) 8 (i.e. Celsius according to EntitySensorDataType) 6 (i.e. voltsDC according to EntitySensorDataType)
1.3.6.1.2.1.99.1.1.1.2.index entPhySensorScale 8 (i.e. milli according to EntitySensorDataScale) 8 (i.e. milli according to EntitySensorDataScale) 9 (i.e. units according to EntitySensorDataScale) 9 (i.e. units according to EntitySensorDataScale)
1.3.6.1.2.1.99.1.1.1.3.index entPhySensorPrecision 4 2 1 2
1.3.6.1.2.1.99.1.1.1.4.index entPhySensorValue 7998 444 25.4 337
1.3.6.1.2.1.47.1.1.1.1.2.index entPhysicalDescr DOM RX Power Sensor for Ethernet29/1 DOM RX Power Sensor for Ethernet29/1 DOM Temperature Sensor for Ethernet29 DOM Voltage Sensor for Ethernet29

Note: Enum definition: https://tools.ietf.org/html/rfc3433