Skip to content

Latest commit

 

History

History
39 lines (29 loc) · 2.29 KB

File metadata and controls

39 lines (29 loc) · 2.29 KB

Readme

This project contains a small python script to read temperature off a special sensor with your Raspberry Pi. The script will send the temperature data every few seconts to an Azure IoT Hub for further processing. The following explains you which hardware and libraries you need to interact with your sensor and Azure IoT Hub.

Hardware and set-up

Hardware

  • Raspberry Pi (I'm using Raspberry Pi 3)
  • Breadboard
  • Temperature Sensor: As temperature sensor this project uses the DS18B20 Waterproof Digital temperature sensor, available on Adafruit

Set-up

Follow the instructions shown in Jeremy Morgans blog to wire up the sensor and test it. As described in the tutorial, you have to install the following kernel modules:

sudo modprobe w1-gpio 
sudo modprobe w1-therm

Azure IoT Hub

Create device identity

As the script sends the measured temperature to an Azure IoT Hub, you have to create one first. To send your data to the Azure IoT Hub, you'll first have to create the DeviceIdentity on your Hub. This is done by the CreateDeviceIdentity.py script. Before executing the script you have to install the used python packages as described here. Install also the other used packages. You are nearly there, but there is another thing to do. Create a connectionData.jsonwhich looks like the following:

{
    "host_name": "Azure IoT Hub name",
    "connection_string": "Azure IoT Hub connection string",
    "device_id": "RaspberryPiTemperatureDevice",
    "device_connection_string": ""
}

Get the hostname as well as the connection_string from creating your Azure IoT Hub. The script will fill the device_connection_string itself. After executing the script now, you created a device identity for your Raspberry Pi to send the data to your Azure IoT Hub.

Sending temperature data to Azure IoT Hub

To send your measured temperature data, you have to install the relevant Azure python packages as well as the other used python packages. Execute RaspberryPiTemperatureDevice.py to read your room temperature and send it to your Azure IoT Hub.

Licence

MIT