We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
打开如下图
DNS污染,raw.githubusercontent.com无法链接
通过IPAddress.com首页,输入raw.githubusercontent.com查询到真实IP地址 199.232.68.133 打开C:\Windows\System32\drivers\etc\hosts文件 添加 以下内容并保存即可恢复 199.232.68.133 raw.githubusercontent.com
打开终端(Terminal),默认位置在 启动台 --> 其它 --> 终端 在终端中,输入以下命令,使用vim修改hosts文件(会要求输入计算机密码):sudo vi /etc/hosts 确保输入法为英文模式,按一下键盘上的 i 键 使用方向键,将光标移动至文本尾部,然后再文件尾部添加以下文本:199.232.68.133 raw.githubusercontent.com 按一下esc,然后输入 :wq! ,然后回车
和Mac下操作基本一致
转载: https://www.cnblogs.com/zuoanfengxi/p/12724698.html https://www.jianshu.com/p/bbd79e0444ea
The text was updated successfully, but these errors were encountered:
找个梯子。。。
Sorry, something went wrong.
No branches or pull requests
问题描述
打开如下图
原因
DNS污染,raw.githubusercontent.com无法链接
解决方案
Windows
通过IPAddress.com首页,输入raw.githubusercontent.com查询到真实IP地址
199.232.68.133
打开C:\Windows\System32\drivers\etc\hosts文件
添加 以下内容并保存即可恢复
199.232.68.133 raw.githubusercontent.com
Mac
打开终端(Terminal),默认位置在 启动台 --> 其它 --> 终端
在终端中,输入以下命令,使用vim修改hosts文件(会要求输入计算机密码):sudo vi /etc/hosts
确保输入法为英文模式,按一下键盘上的 i 键
使用方向键,将光标移动至文本尾部,然后再文件尾部添加以下文本:199.232.68.133 raw.githubusercontent.com
按一下esc,然后输入 :wq! ,然后回车
Linux 系统
和Mac下操作基本一致
转载:
https://www.cnblogs.com/zuoanfengxi/p/12724698.html
https://www.jianshu.com/p/bbd79e0444ea
The text was updated successfully, but these errors were encountered: