Merge tag 'sunxi-dt-for-6.12-2' of https://git.kernel.org/pub/scm/lin…

…ux/kernel/git/sunxi/linux into soc/dt

Allwinner SoC device tree changes for 6.12 part 2

ARM64 device tree and binding-only changes
- Add system and pin voltage regulator supplies for NanoPi NEO Plus2

* tag 'sunxi-dt-for-6.12-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
  arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators

Link: https://lore.kernel.org/r/ZuKmwD8VQrvNx8ir@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts

@@ -45,16 +45,40 @@
 		startup-delay-us = <100000>;
 		enable-active-high;
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_gmac_2v5: gmac-2v5 {
+		/* 2V5 supply for GMAC PHY IO */
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	reg_vcc5v: regulator-vcc5v {
+		/* board 5V supply from micro USB or pin headers */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
 	reg_vcc3v3: vcc3v3 {
+		/* board 3V3 supply by SY8089A */
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
 	};
 
 	vdd_cpux: gpio-regulator {
+		/* cpu voltage regulator MP2143DJ */
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
 		regulator-type = "voltage";
@@ -66,6 +90,7 @@
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
+		vin-supply = <&reg_vcc5v>;
 	};
 
 	wifi_pwrseq: pwrseq {
@@ -146,6 +171,18 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pa-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_gmac_2v5>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;