[SSD1306] Partial MAC address in BLE title

docs/use/displays.md

@@ -5,7 +5,7 @@ Several options are available for the display of information on the SSD1306 disp
 
 The current SSD1306 display states are being published to the `SSD1306toMQTT` topic, e.g.
 
-`{"onstate":true,"brightness":50,"display-metric":true,"display-flip":true,"idlelogo":true,"log-lcd":false,"json-lcd":true}`
+`{"onstate":true,"brightness":50,"display-metric":true,"display-flip":true,"idlelogo":true,"log-oled":false,"json-oled":true}`
 
 ### Display ON/OFF
 To turn the SSD1306 display on or off.
@@ -59,27 +59,27 @@ or at runtime with
 
 ### Setting the log output
 
-The display of serial log messages to the display can be enabled via compiler directive `-DLOG_TO_LCD=true` or via MQTT commands.
+The display of serial log messages to the display can be enabled via compiler directive `-DLOG_TO_OLED=true` or via MQTT commands.
 
-For example if you want to set the serial log to LCD
+For example if you want to set the serial log to OLED
 
-`mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoSSD1306/config -m '{"log-lcd":true}'`
+`mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoSSD1306/config -m '{"log-oled":true}'`
 
-you can also revert it back to the serial monitor:
+you can also revert it back with
 
-`mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoSSD1306/config -m '{"log-lcd":false}'`
+`mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoSSD1306/config -m '{"log-oled":false}'`
 
-The log level of the messages displayed is Errors and Warnings, and this can only be changed via the compiler directive `-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE`. 
+The log level of the messages displayed is Errors and Warnings, and this can only be changed via the compiler directive `-DLOG_LEVEL_OLED=LOG_LEVEL_NOTICE`. 
 
 ### Displaying Module json messages (default)
 
 The display of messages from various modules is also supported. Currently supported modules include `ZgatewayRTL_433`, `ZgatewayBT` and `ZsensorBME280`.
 
-This can be enabled with the compiler directive `-DJSON_TO_LCD=true`.
+This can be enabled with the compiler directive `-DJSON_TO_OLED=true`.
 
 You can also change it by MQTT. For example if you want to display module json messages:
 
-`mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoSSD1306/config -m '{"json-lcd":true}'`
+`mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoSSD1306/config -m '{"json-oled":true}'`
 
 And to disable the display of module json messages:
 

environments.ini

@@ -740,9 +740,9 @@ build_flags =
  '-DZradioSX127x="SX127x"'
 ; *** ssd1306 Display Options ***
  '-DZdisplaySSD1306="HELTEC_SSD1306"'
-; '-DLOG_TO_LCD=false' ; Enable log to LCD
-; '-DJSON_TO_LCD=true'
-; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
+; '-DLOG_TO_OLED=false' ; Enable log to OLED
+; '-DJSON_TO_OLED=true'
+; '-DLOG_LEVEL_OLED=LOG_LEVEL_NOTICE'
 ; '-DDISPLAY_IDLE_LOGO=false'
 ; '-DDISPLAY_BRIGHTNESS=80'
 ; '-DDISPLAY_METRIC=false'
@@ -793,9 +793,9 @@ build_flags =
  '-DZradioSX127x="SX127x"'
 ; *** ssd1306 Display Options ***
  '-DZdisplaySSD1306="LilyGo_SSD1306"'
-; '-DLOG_TO_LCD=true' ; Enable log to LCD
-; '-DJSON_TO_LCD=true'
-; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
+; '-DLOG_TO_OLED=true' ; Enable log to OLED
+; '-DJSON_TO_OLED=true'
+; '-DLOG_LEVEL_OLED=LOG_LEVEL_NOTICE'
 ; '-DDISPLAY_IDLE_LOGO=false'
 ; '-DDISPLAY_BRIGHTNESS=80'
 ; '-DDISPLAY_METRIC=false'
@@ -960,9 +960,9 @@ build_flags =
  '-DLED_SEND_RECEIVE_ON=1'
 ; *** ssd1306 Display Options ***
  '-DZdisplaySSD1306="HELTEC_SSD1306"'
-; '-DLOG_TO_LCD=true' ; Enable log to LCD
-; '-DJSON_TO_LCD=true'
-; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
+; '-DLOG_TO_OLED=true' ; Enable log to OLED
+; '-DJSON_TO_OLED=true'
+; '-DLOG_LEVEL_OLED=LOG_LEVEL_NOTICE'
 ; '-DDISPLAY_IDLE_LOGO=false'
 ; '-DDISPLAY_BRIGHTNESS=80'
 ; '-DDISPLAY_METRIC=false'
@@ -988,9 +988,9 @@ build_flags =
  '-DLED_SEND_RECEIVE_ON=1'
 ; *** ssd1306 Display Options ***
  '-DZdisplaySSD1306="HELTEC_SSD1306"'
-; '-DLOG_TO_LCD=true' ; Enable log to LCD
-; '-DJSON_TO_LCD=true'
-; '-DLOG_LEVEL_LCD=LOG_LEVEL_NOTICE'
+; '-DLOG_TO_OLED=true' ; Enable log to OLED
+; '-DJSON_TO_OLED=true'
+; '-DLOG_LEVEL_OLED=LOG_LEVEL_NOTICE'
 ; '-DDISPLAY_IDLE_LOGO=false'
 ; '-DDISPLAY_BRIGHTNESS=80'
 ; '-DDISPLAY_METRIC=false'

main/ZdisplaySSD1306.ino

@@ -41,8 +41,8 @@
 
 SemaphoreHandle_t semaphoreOLEDOperation;
 QueueHandle_t displayQueue;
-boolean logToLCDDisplay = LOG_TO_LCD;
-boolean jsonDisplay = JSON_TO_LCD;
+boolean logToOLEDDisplay = LOG_TO_OLED;
+boolean jsonDisplay = JSON_TO_OLED;
 boolean displayMetric = DISPLAY_METRIC;
 boolean displayFlip = DISPLAY_FLIP;
 boolean displayState = DISPLAY_STATE;
@@ -52,9 +52,9 @@ uint8_t displayBrightness = round(DISPLAY_BRIGHTNESS * 2.55);
 /*
 Toogle log display
 */
-void logToLCD(bool display) {
- logToLCDDisplay = display;
- display ? Log.begin(LOG_LEVEL_LCD, &Oled) : Log.begin(LOG_LEVEL, &Serial); // Log on LCD following LOG_LEVEL_LCD
+void logToOLED(bool display) {
+ logToOLEDDisplay = display;
+ display ? Log.begin(LOG_LEVEL_OLED, &Oled) : Log.begin(LOG_LEVEL, &Serial); // Log on OLED following LOG_LEVEL_OLED
 }
 
 /*
@@ -63,8 +63,8 @@ module setup, for use in Arduino setup
 void setupSSD1306() {
  Log.trace(F("Setup SSD1306 Display" CR));
  Log.trace(F("ZdisplaySSD1306 command topic: %s" CR), subjectMQTTtoSSD1306set);
- Log.trace(F("ZdisplaySSD1306 log-lcd: %T" CR), logToLCDDisplay);
- Log.trace(F("ZdisplaySSD1306 json-lcd: %T" CR), jsonDisplay);
+ Log.trace(F("ZdisplaySSD1306 log-oled: %T" CR), logToOLEDDisplay);
+ Log.trace(F("ZdisplaySSD1306 json-oled: %T" CR), jsonDisplay);
  Log.trace(F("ZdisplaySSD1306 DISPLAY_PAGE_INTERVAL: %d" CR), DISPLAY_PAGE_INTERVAL);
  Log.trace(F("ZdisplaySSD1306 DISPLAY_IDLE_LOGO: %T" CR), DISPLAY_IDLE_LOGO);
  Log.trace(F("ZdisplaySSD1306 DISPLAY_METRIC: %T" CR), displayMetric);
@@ -73,8 +73,8 @@ void setupSSD1306() {
  Oled.begin();
  Log.notice(F("Setup SSD1306 Display end" CR));
 
-# if LOG_TO_LCD
- Log.begin(LOG_LEVEL_LCD, &Oled); // Log on LCD following LOG_LEVEL_LCD
+# if LOG_TO_OLED
+ Log.begin(LOG_LEVEL_OLED, &Oled); // Log on OLED following LOG_LEVEL_OLED
  jsonDisplay = false;
 # else
  jsonDisplay = true;
@@ -93,7 +93,7 @@ void loopSSD1306() {
 
  long enough since the last message and display not being used and a queue message waiting
  */
- if (jsonDisplay) {
+ if (jsonDisplay && displayState) {
  if (uptime() >= nextDisplayPage && uxSemaphoreGetCount(semaphoreOLEDOperation) && uxQueueMessagesWaiting(displayQueue)) {
  displayQueueMessage* message = nullptr;
  xQueueReceive(displayQueue, &message, portMAX_DELAY);
@@ -108,7 +108,8 @@ void loopSSD1306() {
  /*
  Display logo if it has been more than DISPLAY_PAGE_INTERVAL
  */
- if (uptime() > nextDisplayPage + 1 && !logoDisplayed && idlelogo) {
+ if (uptime() > nextDisplayPage + 1 && !logoDisplayed && idlelogo && displayState) {
+ Oled.display->normalDisplay();
  Oled.fillScreen(BLACK);
  Oled.drawLogo(rand() % 13 - 5, rand() % 32 - 13);
  logoDisplayed = true;
@@ -117,43 +118,48 @@ void loopSSD1306() {
 
 /*
 Handler for mqtt commands sent to the module
-- log-lcd: boolean
+- log-oled: boolean
  Enable / Disable display of log messages on display
 */
 void MQTTtoSSD1306(char* topicOri, JsonObject& SSD1306data) { // json object decoding
  bool success = false;
  if (cmpToMainTopic(topicOri, subjectMQTTtoSSD1306set)) {
  Log.trace(F("MQTTtoSSD1306 json set" CR));
- // Log display set between SSD1306 lcd (true) and serial monitor (false)
+ // Log display set between SSD1306 OLED (true) and serial monitor (false)
  if (SSD1306data.containsKey("onstate")) {
  if (displayState != SSD1306data["onstate"]) {
  displayState = SSD1306data["onstate"];
- Oled.begin();
+ if (!displayState) {
+ Oled.display->displayOff();
+ } else {
+ Oled.display->displayOn();
+ Oled.begin();
+ }
  }
  displayState = SSD1306data["onstate"];
- Log.notice(F("Set display state: %T" CR), logToLCDDisplay);
+ Log.notice(F("Set display state: %T" CR), logToOLEDDisplay);
  success = true;
  } else if (SSD1306data.containsKey("brightness")) {
  displayBrightness = SSD1306data["brightness"];
  displayBrightness = round(displayBrightness * 2.55);
  Oled.display->setBrightness(displayBrightness);
  Log.notice(F("Set brightness: %d" CR), displayBrightness);
  success = true;
- } else if (SSD1306data.containsKey("log-lcd")) {
- logToLCDDisplay = SSD1306data["log-lcd"];
- Log.notice(F("Set lcd log: %T" CR), logToLCDDisplay);
- logToLCD(logToLCDDisplay);
- if (logToLCDDisplay) {
+ } else if (SSD1306data.containsKey("log-oled")) {
+ logToOLEDDisplay = SSD1306data["log-oled"];
+ Log.notice(F("Set OLED log: %T" CR), logToOLEDDisplay);
+ logToOLED(logToOLEDDisplay);
+ if (logToOLEDDisplay) {
  jsonDisplay = false;
  }
  success = true;
- } else if (SSD1306data.containsKey("json-lcd")) {
- jsonDisplay = SSD1306data["json-lcd"];
+ } else if (SSD1306data.containsKey("json-oled")) {
+ jsonDisplay = SSD1306data["json-oled"];
  if (jsonDisplay) {
- logToLCDDisplay = false;
- logToLCD(logToLCDDisplay);
+ logToOLEDDisplay = false;
+ logToOLED(logToOLEDDisplay);
  }
- Log.notice(F("Set json-lcd: %T" CR), jsonDisplay);
+ Log.notice(F("Set json-oled: %T" CR), jsonDisplay);
  success = true;
  } else if (SSD1306data.containsKey("display-metric")) {
  displayMetric = SSD1306data["display-metric"];
@@ -192,15 +198,14 @@ constexpr unsigned int hash(const char* s, int off = 0) { // workaround for swit
 Parse json message from module into a format for displaying on screen, and queue for display
 */
 void ssd1306PubPrint(const char* topicori, JsonObject& data) {
- if (jsonDisplay) {
+ if (jsonDisplay && displayState) {
  displayQueueMessage* message = (displayQueueMessage*)malloc(sizeof(displayQueueMessage));
  if (message != NULL) {
  char* topic = strdup(topicori);
  strlcpy(message->title, strtok(topic, "/"), OLED_TEXT_WIDTH);
  free(topic);
 
  Oled.display->normalDisplay();
- // Oled.display->normalDisplay();
 
  switch (hash(message->title)) {
  case hash("SYStoMQTT"): {
@@ -303,6 +308,7 @@ void ssd1306PubPrint(const char* topicori, JsonObject& data) {
 
  if (xQueueSend(displayQueue, (void*)&message, 0) != pdTRUE) {
  Log.error(F("[ SSD1306 ] displayQueue full, discarding signal %s" CR), message->title);
+ free(message);
  } else {
  // Log.notice(F("Queued %s" CR), message->title);
  }
@@ -667,6 +673,13 @@ void ssd1306PubPrint(const char* topicori, JsonObject& data) {
  line4 = properties[4] + properties[5];
 
  if (!(line2 == "" && line3 == "" && line4 == "")) {
+ // Titel
+ char* topic = strdup(topicori);
+ String heading = strtok(topic, "/");
+ String line0 = heading + " " + data["id"].as<String>().substring(9, 17);
+ line0.toCharArray(message->title, OLED_TEXT_WIDTH);
+ free(topic);
+
  // Line 1
  strlcpy(message->line1, data["model"], OLED_TEXT_WIDTH);
 
@@ -680,9 +693,13 @@ void ssd1306PubPrint(const char* topicori, JsonObject& data) {
  } else {
  // Log.notice(F("Queued %s" CR), message->title);
  }
+ } else {
+ free(message);
  }
 
  break;
+ } else {
+ free(message);
  }
  }
 # endif
@@ -751,7 +768,7 @@ OledSerial::OledSerial(int x) {
 }
 
 /*
-Initialize ssd1306 oled display for use, and display animated OMG logo
+Initialize ssd1306 oled display for use, and display OMG logo
 */
 void OledSerial::begin() {
  // SSD1306.begin(); // User OMG serial support
@@ -845,6 +862,7 @@ Display full page message on the display.
 boolean OledSerial::displayPage(displayQueueMessage* message) {
  if (xPortGetCoreID() == CONFIG_ARDUINO_RUNNING_CORE) {
  if (xSemaphoreTake(semaphoreOLEDOperation, pdMS_TO_TICKS(30000)) == pdTRUE) {
+ display->normalDisplay();
  display->clear();
  display->setColor(WHITE);
  display->setFont(ArialMT_Plain_10);
@@ -909,8 +927,8 @@ void stateSSD1306Display() {
  DISPLAYdata["display-metric"] = (bool)displayMetric;
  DISPLAYdata["display-flip"] = (bool)displayFlip;
  DISPLAYdata["idlelogo"] = (bool)idlelogo;
- DISPLAYdata["log-lcd"] = (bool)logToLCDDisplay;
- DISPLAYdata["json-lcd"] = (bool)jsonDisplay;
+ DISPLAYdata["log-oled"] = (bool)logToOLEDDisplay;
+ DISPLAYdata["json-oled"] = (bool)jsonDisplay;
  pub(subjectSSD1306toMQTT, DISPLAYdata);
 }
 

main/ZgatewayBT.ino

@@ -991,9 +991,8 @@ void launchBTDiscovery(bool overrideDiscovery) {
 void PublishDeviceData(JsonObject& BLEdata, bool processBLEData) {
  if (abs((int)BLEdata["rssi"] | 0) < abs(BTConfig.minRssi)) { // process only the devices close enough
  if (processBLEData) process_bledata(BLEdata);
- String topic = subjectBTtoMQTT;
- if (BLEdata.containsKey("model") || BLEdata.containsKey("distance")) { // Only display sensor data
- pubOled((char*)topic.c_str(), BLEdata);
+ if (BLEdata.containsKey("type") && (BLEdata.containsKey("model") || BLEdata.containsKey("distance"))) { // Only display sensor data with type
+ pubOled(subjectBTtoMQTT, BLEdata);
  }
  if (!BTConfig.pubAdvData) {
  BLEdata.remove("servicedatauuid");

main/config_SSD1306.h

@@ -42,16 +42,16 @@
 
 /*-------------------DEFINE LOG LEVEL----------------------*/
 
-#ifndef LOG_LEVEL_LCD
-# define LOG_LEVEL_LCD LOG_LEVEL_WARNING // Default to only display Warning level messages
+#ifndef LOG_LEVEL_OLED
+# define LOG_LEVEL_OLED LOG_LEVEL_WARNING // Default to only display Warning level messages
 #endif
 
-#ifndef LOG_TO_LCD
-# define LOG_TO_LCD false // Default to not display log messages on display
+#ifndef LOG_TO_OLED
+# define LOG_TO_OLED false // Default to not display log messages on display
 #endif
 
-#ifndef JSON_TO_LCD
-# define JSON_TO_LCD true // Default to displaying JSON messages on the display
+#ifndef JSON_TO_OLED
+# define JSON_TO_OLED true // Default to displaying JSON messages on the display
 #endif
 
 #ifndef DISPLAY_PAGE_INTERVAL