Add environment for board Wemos Lolin C3 mini

.github/workflows/build.yml

@@ -76,6 +76,7 @@ jobs:
  - "esp32s3-dev-c1-ble"
  - "esp32c3-dev-m1-ble"
  - "airm2m_core_esp32c3"
+ - "lolin_c3_mini"
  - "thingpulse-espgateway"
  - "thingpulse-espgateway-ethernet"
  runs-on: ubuntu-latest

environments.ini

@@ -1539,6 +1539,46 @@ build_flags =
 custom_description = BLE gateway on the C3
 custom_hardware = AirM2M ESP32C3-CORE
 
+; Wemos Lolin C3 mini v2.1.0
+[env:lolin_c3_mini]
+;platform = ${com.esp32_c3_s3_platform} ; standard is @5.2.0, causes `assert rwble.c 261` error
+platform = espressif32@5.3.0 ; override to @5.3.0. Includes a fixed for the `assert rwble.c 261` error
+board = lolin_c3_mini
+board_build.partitions = min_spiffs.csv
+monitor_speed = 115200
+lib_deps =
+ ${com-esp.lib_deps}
+ ${libraries.wifimanager32}
+ ${libraries.ble}
+ ${libraries.decoder}
+build_flags =
+ ${com-esp.build_flags}
+ '-DZgatewayBT="BT"'
+; FastLED must be disabled. FastLED is not compatible with this board at the current moment.
+; The LED pins must still be defined, to avoid an error loop on pin definitions.
+; Available GPIOs are 0 - 8, 10, 20, 21.
+; See https://community.openmqttgateway.com/t/watchdog-kills-omg-on-esp32-c3-within-seconds/2192/15
+ '-DLED_SEND_RECEIVE=10'
+ '-DLED_INFO=6'
+ '-DLED_ERROR=7'
+ '-DTRIGGER_GPIO=9'
+ '-DNO_INT_TEMP_READING=true' ; No internal temperature on ESP32 C3 or S3
+ '-DGateway_Name="OpenMQTTGateway_ESP32C3_BLE"'
+; Serial output currently causes a delay on each message, if no serial listener is connected.
+; Therefore we disable serial output. Use the _with_serial environment if you
+; need serial output for debugging purposes.
+ '-DLOG_LEVEL=LOG_LEVEL_SILENT' ; disable serial logging.
+ '-DWM_DEBUG_LEVEL=DEBUG_ERROR' ; disable serial logging.
+custom_description = BLE gateway on ESP32C3
+custom_hardware = Wemos Lolin C3 mini v2.1.0
+
+[env:lolin_c3_mini_with_serial]
+extends = env:lolin_c3_mini
+build_flags =
+ ${env:lolin_c3_mini.build_flags}
+ '-DLOG_LEVEL=LOG_LEVEL_NOTICE' ;default
+ '-DWM_DEBUG_LEVEL=DEBUG_NOTIFY' ;default
+
 [env:thingpulse-espgateway]
 platform = ${com.esp32_platform}
 board = esp32dev

platformio.ini

@@ -98,6 +98,7 @@ extra_configs =
 ;default_envs = esp32s3-dev-c1-ble
 ;default_envs = esp32c3-dev-m1-ble
 ;default_envs = airm2m_core_esp32c3
+;default_envs = lolin_c3_mini
 ;default_envs = thingpulse-espgateway
 ;default_envs = thingpulse-espgateway-ethernet