Merge pull request #4073 from axlan/devcountainer-runargs

Add example runArgs to devcountainer to access serial port (for firmware upload) directly from the devcontainer.

.devcontainer/devcontainer.json

@@ -12,6 +12,21 @@
 		}
 	},
 
+	// To give the container access to a device serial port, you can uncomment one of the following lines.
+	// Note: If running on Windows, you will have to do some additional steps:
+	// https://stackoverflow.com/questions/68527888/how-can-i-use-a-usb-com-port-inside-of-a-vscode-development-container
+	//
+	// You can explicitly just forward the port you want to connect to. Replace `/dev/ttyACM0` with the serial port for
+	// your device. This will only work if the device is plugged in from the start without reconnecting. Adding the
+	// `dialout` group is needed if read/write permisions for the port are limitted to the dialout user.
+	// "runArgs": ["--device=/dev/ttyACM0", "--group-add", "dialout"],
+	//
+	// Alternatively, you can give more comprehensive access to the host system. This will expose all the host devices to
+	// the container. Adding the `dialout` group is needed if read/write permisions for the port are limitted to the
+	// dialout user. This could allow the container to modify unrelated serial devices, which would be a similar level of
+	// risk to running the build directly on the host.
+	// "runArgs": ["--privileged", "-v", "/dev/bus/usb:/dev/bus/usb", "--group-add", "dialout"],
+
 	// Set *default* container specific settings.json values on container create.
 	"settings": { 
 		"terminal.integrated.shell.linux": "/bin/bash",