Data 29.06.2022

Fixes for 7 inch screen

• Fixed interface in some places for alignment and other languages.
• Fix button to switch bad heat (did not react on pressing).
• Keyboard replaced by nicer one.
• Replaced some icons.
• Added some lines for English and Russian language.

FLY-Screen-RepRap

Firmware for the Fly Screens to be used with RepRapFirmware

Config.g Setup

Edit the config file to include the following line

M575 P1 S0 B57600

Upgrading the firmware

• Download the update
• Rename it to update.img
• Place the relevant update into the root of a FAT32 formatted SD card.
• Power on the screen.
• Apply the update.
• Once complete, power down the screen and remove the SD Card

Adding a boot display

4.3" Screen

• Create a 480x232 resolution picture, the picture size should not exceed 128kb
• Rename the picture name to boot_logo.JPG, JPG is uppercase.
• Put the picture into the root directory of the sd card.
• Plug it into the screen to upgrade.

7" Screen

• Create 800x480 resolution picture, the picture size should not exceed 128kb
• Rename the picture name to boot_logo.JPG, JPG is uppercase.
• Put the picture into the root directory of the sd card.
• Plug it into the screen to upgrade.

Future Features

• Support printing from the screen sd card and USB disk
• firmware settings are temporarily unavailable, and will be supported in the near future
• Modify the config.g file on the screen.
• Configure the machine firmware on the screen without opening the web page configuration

Compiling/Editing instructions

Please see here for more detailed information regarding compiling and editing the firmware now it is open source.

Support

If you have any usage problems, please join https://discord.gg/hccjyvv Come to consult me