Air Temp and Humidity do not work after Integration with ESPHome Builder #49
Description
Out of the box the Air Temp and Humidity show up in Home Assistant and on the Web UI. After integration with ESPHome Builder the Air temp and Humidity shows as unknown in HA and as N/A in the Web UI. This shows up in the logs:
[20:30:52.456][C][aht10:156]: AHT10:
[20:30:52.457][C][aht10:157]: Address: 0x38
[20:30:52.461][E][aht10:159]: Communication failed
[20:30:52.461][C][aht10:017]: Temperature 'Air Temperature'
[20:30:52.461][C][aht10:017]: State Class: 'measurement'
[20:30:52.461][C][aht10:017]: Unit of Measurement: '°C'
[20:30:52.461][C][aht10:017]: Accuracy Decimals: 2
[20:30:52.503][C][aht10:027]: Device Class: 'temperature'
[20:30:52.503][C][aht10:017]: Humidity 'Air Humidity'
[20:30:52.503][C][aht10:017]: State Class: 'measurement'
[20:30:52.503][C][aht10:017]: Unit of Measurement: '%'
[20:30:52.503][C][aht10:017]: Accuracy Decimals: 2
[20:30:52.504][C][aht10:027]: Device Class: 'humidity'
[20:30:52.504][E][component:154]: aht10.sensor is marked FAILED: unspecified
This may be an incompatibility with the latest version of ESPHome. Reverting back to the stock firmware brings both readings back showing it is not a Hardware failure. I am attaching the full logs.