evmdis is an EVM disassembler. It performs static analysis on the bytecode to provide a higher level of abstraction for the bytecode than raw EVM operations.
Features include:
- Separates bytecode into basic blocks.
- Jump target analysis, assigning labels to jump targets and replacing addresses with label names.
- Composes individual operations into compound expressions where possible.
- Provides insight into the state of the stack at the start of each block.
The following contract, compiled with solc --optimize:
contract Test {
function double(uint a) returns (uint) {
return multiply(a, 2);
}
function triple(uint a) returns (uint) {
return multiply(a, 3);
}
function multiply(uint a, uint b) internal returns (uint) {
return a * b;
}
}
Produces the following disassembly:
# Stack: []
0x4 MSTORE(0x40, 0x60)
0xD PUSH(CALLDATALOAD(0x0) / 0x2 ** 0xE0)
0x13 DUP1
0x17 JUMPI(:label0, POP() == 0xEEE97206)
# Stack: [@0xD]
0x18 DUP1
0x21 JUMPI(:label2, 0xF40A049D == POP())
# Stack: [@0xD]
0x25 JUMP(0x2)
:label0
# Stack: [@0xD]
0x2A JUMPI(0x2, CALLVALUE())
# Stack: [@0xD]
0x2B PUSH(:label3)
0x2F PUSH(CALLDATALOAD(0x4))
0x30 PUSH(0x0)
0x32 PUSH(:label4)
0x34 DUP3
0x35 PUSH(0x2)
:label1
# Stack: [[0x3 | 0x2] [@0x44 | @0x2F] [:label4 | :label4] [0x0 | 0x0] [@0x44 | @0x2F] [:label3 | :label3] @0xD]
0x38 PUSH(POP() * POP())
0x39 SWAP1
0x3A JUMP(POP())
:label2
# Stack: [@0xD]
0x3F JUMPI(0x2, CALLVALUE())
# Stack: [@0xD]
0x40 PUSH(:label3)
0x44 PUSH(CALLDATALOAD(0x4))
0x45 PUSH(0x0)
0x47 PUSH(:label4)
0x49 DUP3
0x4A PUSH(0x3)
0x4E JUMP(:label1)
:label3
# Stack: [@0x38 @0xD]
0x50 PUSH(0x40)
0x52 DUP1
0x53 PUSH(MLOAD(POP()))
0x54 SWAP2
0x55 DUP3
0x56 MSTORE(POP(), POP())
0x57 PUSH(MLOAD(POP()))
0x58 SWAP1
0x59 DUP2
0x5A SWAP1
0x60 RETURN(POP(), 0x20 + POP() - POP())
:label4
# Stack: [@0x38 [0x0 | 0x0] [@0x44 | @0x2F] [:label3 | :label3] @0xD]
0x62 SWAP3
0x63 SWAP2
0x64 POP()
0x65 POP()
0x66 JUMP(POP())
evmdis works on the principle of static analysis by abstract execution. Abstract execution is the process of simulating the execution of a program, substituting the 'concrete' values for abstract ones representing some useful property. Done properly, this is guaranteed to terminate (unlike regular execution).
Abstract execution is implemented in abstract.go. Callers provide an EvmState object that represents the current state of execution for the analysis in question, with an Advance method that performs some execution before returning zero or more new states. EvmState implementations must be hashable, since they're used as keys in a Go map.
Abstract execution starts with a single initial state. After calling Advance, each of the output states is compared to a map keeping track of all previously seen states. If the output state is not in the map, it is added to the map and to a stack of pending states. The procedure then pops a pending state off the stack and repeats until the stack of pending states is empty.
For example, evmdis performs reaching definition analysis. The goal of this is to generate, for each instruction that produces output, a list of all the places that the output is consumed. It does this by simulating execution of the code, replacing actual stack values with the address of the operation that generated them. Each time we encounter an instruction, we take the top elements of the current stack, and union each element with a set of previous definitions we've seen. The abstract execution semantics ensure that we continue executing for as long as we keep encountering new arrangements of the execution stack.
evmdis implements a number of different analyses, each building on the others. Only some of these require abstract execution.
Each analysis annotates instructions or basic blocks (described below) with objects that provide additional data about the code.
First, the code is parsed and split up into basic blocks. A basic block is a series of sequential EVM operations that do not contain any control flow (jumps in or out). Each basic block may optionally start with a JUMPDEST, and may optionally end with a JUMP or JUMPI; these operations will never occur inside a block. The sequential nature of basic blocks makes them useful building blocks for analysis.
Next, we perform reaching definition analysis on the code, as described above in "How it works". This produces a ReachingDefinition annotation on each reachable basic block and each reachable instruction. A ReachingDefinition is a list of sets of InstructionPointers, pointing to the source of each definition that reaches the given argument.
ReachingDefinition annotations on instructions have the same number of elements as the opcode has input arguments. ReachingDefinition annotations on basic blocks have elements for every stack slot that can be statically determined to be always present.
Reaches analysis is the inverse of reaching definition analysis; for each instruction it annotates all the locations that its output reaches. This step does not require symbolic execution; it simply iterates over the reaching definition analysis and inverts it. This produces a ReachesDefinition annotation on each instruction. A ReachesDefinition is a list of instruction pointers.
This step finds all PUSH instructions whose output are consumed exclusively by JUMP or JUMPI instructions, and converts them to symbolic jump targets, inserting jump targets at the beginning of the appropriate basic blocks.
Relevant PUSH instructions are annotated with an Expression that is an instance of JumpLabel, and relevant basic blocks are annotated with the same JumpLabel.
Expression construction iterates over each basic block, identifying operations that are consumed only at a single location, constructing composite expressions for them. For instance, PUSH1 3 PUSH1 1 PUSH1 2 ADD MUL is rewritten to the expression (1 + 2) * 3. POP operations are elided when possible, and explicitly included as annotations where not. DUP and SWAP operations are eliminated where possible, and adjusted to show the correct number of stack slots when 'lifting' removes elements from the (virtual) stack.
Each instruction that is not part of a subexpression is annotated with an Expression instance.
Retrieve the evmdis source. For example:
go get github.com/Arachnid/evmdis
Build and install evmdis to $GOPATH/bin:
go install github.com/Arachnid/evmdis/evmdis
Sanity check, assuming $GOPATH/bin is in your $PATH:
evmdis -h
