Skip to content

Convert Svelte (or React/Angular/Vue) JS application to serve it from ESP32/ESP8266 webserver

Notifications You must be signed in to change notification settings

BCsabaEngine/svelteesp32

Repository files navigation

svelteesp32 image

Changelog

Convert Svelte (or React/Angular/Vue) JS application to serve it from ESP32/ESP8266 webserver

Forget SPIFFS and LittleFS now

I often make small to medium-sized microcontroller solutions that run on ESP32 or ESP8266. If a web interface is needed, I create a Svelte application. The Svelte application is practically served by the ESP32/ESP8266.

In order to be able to easily update OTA, it is important - from the users' point of view - that the update file consists of one file. I can't use the SPIFFS/LittleFS solution for this. It is necessary that the WebUI files are included inline in the Arduino or PlatformIO c++ code.

This npm package provides a solution for inserting any JS client application into the ESP web server (PsychicHttp and also ESPAsyncWebServer available, PsychicHttp is the default). For this, JS, html, css, font, assets, etc. files must be converted to binary byte array. Npm mode is easy to use and easy to integrate into your CI/CD pipeline.

Starting with version v1.5.0, PsychicHttp v2 is also supported.

Version v1.4.0 has a breaking change! --no-gzip changed to --gzip. Starting with this version c++ compiler directives are available to setup operation in project level.

Starting with version v1.3.0, c++ defines can be used.

Starting with version v1.2.0, ESP8266/ESP8285 is also supported.

Starting with version v1.1.0, the ETag header is also supported.

Usage

Install package as devDependency (it is practical if the package is part of the project so that you always receive updates)

npm install -D svelteesp32

After a successful Svelte build (rollup/webpack/vite) create an includeable c++ header file

// for PsychicHttpServer
npx svelteesp32 -e psychic -s ../svelteapp/dist -o ../esp32project/svelteesp32.h --etag=true

// for PsychicHttpServer V2
npx svelteesp32 -e psychic2 -s ../svelteapp/dist -o ../esp32project/svelteesp32.h --etag=true

// for ESPAsyncWebServer
npx svelteesp32 -e async -s ../svelteapp/dist -o ../esp32project/svelteesp32.h --etag=true

During the translation process, the processed file details are visible, and at the end, the result shows the ESP's memory allocation (gzip size)

[assets/index-KwubEIf-.js]  ✓ gzip used (38850 -> 12547)
[assets/index-Soe6cpLA.css] ✓ gzip used (32494 -> 5368)
[favicon.png]               x gzip unused (33249 -> 33282)
[index.html]                x gzip unused (too small) (472 -> 308)
[roboto_regular.json]       ✓ gzip used (363757 -> 93567)

5 files, 458kB original size, 142kB gzip size
../../../Arduino/EspSvelte/svelteesp32.h 842kB size

Include svelteesp32.h into your Arduino or PlatformIO c++ project (copy it next to the main c++ file)

...

#include <PsychicHttp.h>
#include "svelteesp32.h"

PsychicHttpServer server;

...

void setup()
{
    ...

    server.listen(80);

    initSvelteStaticFiles(&server);
}

or

...

#include <ESPAsyncWebServer.h>
#include "svelteesp32.h"

AsyncWebServer server(80);

...

void setup()
{
    ...

    initSvelteStaticFiles(&server);

    server.begin();
}

You can find a minimal buildable example platformio project in demo/esp32 folder.

The content of generated file (do not edit, just use)

#define SVELTEESP32_COUNT 5
#define SVELTEESP32_SIZE 145633
#define SVELTEESP32_FILE_INDEX_HTML
#define SVELTEESP32_HTML_FILES 1
...

const uint8_t data0[12547] = {0x1f, 0x8b, 0x8, 0x0, ...
const uint8_t data1[5368] = {0x1f, 0x8b, 0x8, 0x0, 0x0, ...
const char * etag0 = "387b88e345cc56ef9091...";

void initSvelteStaticFiles(PsychicHttpServer * server) {
  server->on("/assets/index-KwubEIf-.js", HTTP_GET, [](PsychicRequest * request)
  {
    if (request->hasHeader("If-None-Match") && ...) {
      PsychicResponse response304(request);
      response304.setCode(304);
      return response304.send();
    }

    PsychicResponse response(request);
    response.setContentType("application/javascript");
    response.addHeader("Content-Encoding", "gzip");
    response.setContent(data0, sizeof(data0));
    return response.send();
  });

  server->on("/assets/index-Soe6cpLA.css", HTTP_GET, [](PsychicRequest * request)
  {
    if (request->hasHeader("If-None-Match") && ...) {
      ...
    }

    PsychicResponse response(request);
    response.setContentType("text/css");
    response.addHeader("Content-Encoding", "gzip");
    response.setContent(data1, sizeof(data1));
    return response.send();
  });

    ...
}

Engines and ESP variants

ESPAsyncWebServer is a popular web server that can be used on both ESP32 and ESP8266 microcontrollers. When you want to generate a file for this, use the -e async switch.

If you only work on ESP32, I recommend using PsychicHttpServer, which uses the native mode ESP-IDF web server inside. This way, its operation is significantly faster and more continuous. You can access this mode with the -e psychic switch.

Gzip

All modern browsers have been able to handle gzip-compressed content for years. For this reason, there is no question that the easily compressed JS and CSS files are stored compressed in the ESP32/ESP8266 and sent to the browser.

During the translation process, data in gzip format is generated and will be used if the size is greater than 1024 bytes and we experience a reduction of at least 15%. In such a case, the compressed data is unconditionally sent to the browser with the appropriate Content-Encoding header information.

Automatic compression can be turned off with the --gzip=false option.

This setting has three states: yes, no, and compiler mode is available. In compiler mode, you can disable/enable Gzip by setting the SVELTEESP32_ENABLE_GZIP c++ compiler directive. For example, if using platformio, just write -D SVELTEESP32_ENABLE_GZIP.

ETag

The ETag HTTP header can be used to significantly reduce network traffic. If the server sends ETag information, the client can check the integrity of the file by sending back this ETag (in If-None-Match header) without sending the data back again. All browsers use this function, the 304 HTTP response code is clearly visible in the network traffic.

Since microcontroller data traffic is moderately expensive, it is an individual decision whether to use the ETag or not. We recommend using ETag, which adds a bit more code (about 1-3%) but results in a much cleaner operation.

The use of ETag is not enabled by default, this can be achieved with the --etag=true switch.

This setting has three states: yes, no, and compiler mode is available. In compiler mode, you can disable/enable ETag by setting the SVELTEESP32_ENABLE_ETAG c++ compiler directive. For example, if using platformio, just type -D SVELTEESP32_ENABLE_ETAG.

Main entry point - index.html

Typically, the entry point for web applications is the index.htm or index.html file. This does not need to be listed in the browser's address bar because web servers know that this file should be served by default. Svelteesp32 also does this: if there is an index.htm or index.html file, it sets it as the main file to be served. So using http://esp_xxx.local or just entering the http://x.y.w.z/ IP address will serve this main file.

C++ defines

To make it easy to integrate into a larger c++ project, we have made a couple of variables available as c++ defines.

You can use the COUNT and SIZE constants:

...
#include "svelteesp32.h"

#if SVELTEESP32_COUNT != 5
  #error Invalid file count
#endif
...

You can include a blocker error if a named file accidentally missing from the build:

...
#include "svelteesp32.h"

#ifndef SVELTEESP32_FILE_INDEX_HTML
  #error Missing index file
#endif
...

...or if there are too many of a file type:

...
#include "svelteesp32.h"

#if SVELTEESP32_CSS_FILES > 1
  #error Too many CSS files
#endif
...

You can use the following c++ directives at the project level if you want to configure the usage there: SVELTEESP32_ENABLE_ETAG and SVELTEESP32_ENABLE_GZIP. (Do not forget --etag=compiler or --gzip=compiler command line arg!)

Command line options

Option Description default
-s Source dist folder contains compiled web files
-e The engine for which the include file is created (psychic/psychic2/async) psychic
-o Generated output file with path svelteesp32.h
--etag Use ETag header for cache (true/false/compiler) false
--gzip Compress content with gzip (true/false/compiler) true
--created Include creation time false
--version Include a version string, --version=v$npm_package_version ''
--espmethod Name of generated method initSvelteStaticFiles
--define Prefix of c++ defines SVELTEESP32
-h Show help

Q&A

  • How big a frontend application can be placed? If you compress the content with gzip, even a 3-4Mb assets directory can be placed. This is a serious enough amount to serve a complete application.

  • How fast is cpp file compilation? The cpp (.h) file can be large, but it can be compiled in a few seconds on any machine. If you don't modify your svelte/react app, it will use the already compiled cpp file (not recompile). This does not increase the speed of ESP32/ESP8266 development.

  • Does the solution use PROGMEM? No and yes. ESP32 no longer has PROGMEM. (Exists, but does not affect the translation). Instead, if we use a const array in the global namespace, its content will be placed in the code area, i.e. it will not be used from the heap or the stack, so the content of the files to be served will be placed next to the code. When working on ESP8266, PROGMEM will actually be used.

  • Why is the .h file so big? The source files are always larger than the binary compiled from them. Does the size information in the header (SVELTEESP32_SIZE, SVELTEESP32_SIZE_GZIP) show the actual memory allocation.

  • Is collaboration between groups supported? Yes, the Frontend team produces the application, the use of svelteesp32 is part of the build process. Then, provided with a version number, the .h file is placed in git, which the ESP team translates into the platformio application.

  • Will you develop it further? Since I use it myself, I will do my best to make the solution better and better.

  • Is this safe to use in production? I suggest you give it a try! If you find it useful and safe in several different situations, feel free to use it, just like any other free library.