An ergonomic mouse with a trackpad.
Engineered to be a full mouse replacement solution with high-quality, custom-developed components.
This is a work in progress and not meant for ordering yet.
The STL files are included in this Github repository, in the files folder.
| Description | File | Notes |
|---|---|---|
| Case | main.3mf |
|
| Switch holder | switches.3mf |
|
| Trackpad holder | trackpad holder.3mf |
|
| Tent | tent.3mf |
Optional |
| Trackpad holder | trackpad holder.3mf |
You can get a kit from Bastard keyboards directly. Alternatively, you can source components yourself.
| Part name | Amount | Notes |
|---|---|---|
| Heated screw insert, M3x5x5 | 2 | |
| M3 8mm torx screw | 3 | |
| M3 square nut | 1 | |
| Cirque trackpad | 1 | 40mm curved |
Optional parts if you're using the tents
| Part name | Amount | Notes |
|---|---|---|
| Heated screw insert, M3x5x5 | 3 | |
| M3 8mm torx screw | 3 |
You will need 2 PCBs for this mouse.
- A RP2040-based board, the brain of the mouse
- The release section includes gerbers, BOM and POS files
- Order in 1.2mm thickness
- Connects all the switches and add per-key RGB capabilities
- https://github.com/Bastardkb/argos-switches-pcb
- Order in 0.6mm thickness
- You can also instead handsolder or use amoebas, but then might have to modify the firmware.
- Material: PLA
- Layer height: .15mm or .2mm
- Supports: everywhere*
*If using prusaslicer, using auto-painted supports will work as well.
You can find detailed instruction on the online documentation linked below.
- Discord: https://bastardkb.com/discord
- Website: https://bastardkb.com/
- Docs: https://docs.bastardkb.com
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.