Skip to content

Commit

Permalink
[Keyboard] Add Amber80 Solder & VCL65 Solder (qmk#15945)
Browse files Browse the repository at this point in the history
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
  • Loading branch information
3 people authored and zykrah committed Jul 2, 2022
1 parent ee23520 commit 797e4b9
Show file tree
Hide file tree
Showing 27 changed files with 799 additions and 0 deletions.
25 changes: 25 additions & 0 deletions keyboards/sawnsprojects/amber80/readme.md
Original file line number Diff line number Diff line change
@@ -0,0 +1,25 @@
# Amber80 solder

A TKL keyboard sold in several variants.

1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case.

**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.

* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
* Hardware Supported: Amber80
* Hardware Availability: Comming Soon

Make examples for this keyboard (after setting up your build environment):

make sawnsprojects/amber80/solder:default

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
72 changes: 72 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/config.h
Original file line number Diff line number Diff line change
@@ -0,0 +1,72 @@
/* Copyright 2022 SawnsProjects
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID 0x5350
#define PRODUCT_ID 0xA801
#define DEVICE_VER 0x0001
#define MANUFACTURER SawnsProjects X Yuutsu X Zlane
#define PRODUCT Amber80 Solder

/* key matrix size */
#define MATRIX_ROWS 12
#define MATRIX_COLS 9

/* Indicator */
#define LED_CAPS_LOCK_PIN F5
#define LED_SCROLL_LOCK_PIN B0
#define LED_PIN_ON_STATE 0
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B1, B2, B3, B7, D0, D1, F1, F0, D7, B4, D5, D3 }
#define MATRIX_COL_PINS { F4, F6, F7, C7, C6, B6, B5, D6, D4 }
#define UNUSED_PINS

/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW

/* RGB */
#define RGB_DI_PIN D2
#ifdef RGB_DI_PIN
#define RGBLED_NUM 22
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== or choose animations ==*/
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_SNAKE
#define RGBLIGHT_EFFECT_KNIGHT
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_RGB_TEST
#define RGBLIGHT_EFFECT_ALTERNATING
#endif
101 changes: 101 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/info.json
Original file line number Diff line number Diff line change
@@ -0,0 +1,101 @@
{
"keyboard_name": "Amber80 SOLDER",
"url": "",
"maintainer": "SawnsProjects",
"layouts": {
"LAYOUT_all": {
"layout": [
{ "label": "K00 (B1,F4)", "x": 0, "y": 0 },
{ "label": "K10 (B2,F4)", "x": 1.25, "y": 0 },
{ "label": "K01 (B1,F6)", "x": 2.25, "y": 0 },
{ "label": "K11 (B2,F6)", "x": 3.25, "y": 0 },
{ "label": "K02 (B1,F7)", "x": 4.25, "y": 0 },
{ "label": "K12 (B2,F7)", "x": 5.5, "y": 0 },
{ "label": "K03 (B1,C7)", "x": 6.5, "y": 0 },
{ "label": "K13 (B2,C7)", "x": 7.5, "y": 0 },
{ "label": "K04 (B1,C6)", "x": 8.5, "y": 0 },
{ "label": "K14 (B2,C6)", "x": 9.75, "y": 0 },
{ "label": "K05 (B1,B6)", "x": 10.75, "y": 0 },
{ "label": "K15 (B2,B6)", "x": 11.75, "y": 0 },
{ "label": "K06 (B1,B5)", "x": 12.75, "y": 0 },
{ "label": "K16 (B2,B5)", "x": 14, "y": 0 },
{ "label": "K17 (B2,D6)", "x": 15.25, "y": 0 },
{ "label": "K08 (B1,D4)", "x": 16.25, "y": 0 },
{ "label": "K18 (B2,D4)", "x": 17.25, "y": 0 },
{ "label": "K20 (B3,F4)", "x": 0, "y": 1.25 },
{ "label": "K30 (B7,F4)", "x": 1, "y": 1.25 },
{ "label": "K21 (B3,F6)", "x": 2, "y": 1.25 },
{ "label": "K31 (B7,F6)", "x": 3, "y": 1.25 },
{ "label": "K22 (B3,F7)", "x": 4, "y": 1.25 },
{ "label": "K32 (B7,F7)", "x": 5, "y": 1.25 },
{ "label": "K23 (B3,C7)", "x": 6, "y": 1.25 },
{ "label": "K33 (B7,C7)", "x": 7, "y": 1.25 },
{ "label": "K24 (B3,C6)", "x": 8, "y": 1.25 },
{ "label": "K34 (B7,C6)", "x": 9, "y": 1.25 },
{ "label": "K25 (B3,B6)", "x": 10, "y": 1.25 },
{ "label": "K35 (B7,B6)", "x": 11, "y": 1.25 },
{ "label": "K26 (B3,B5)", "x": 12, "y": 1.25 },
{ "label": "K36 (B7,B5)", "x": 13, "y": 1.25 },
{ "label": "K27 (B3,D6)", "x": 14, "y": 1.25 },
{ "label": "K37 (B7,D6)", "x": 15.25, "y": 1.25 },
{ "label": "K28 (B3,D4)", "x": 16.25, "y": 1.25 },
{ "label": "K38 (B7,D4)", "x": 17.25, "y": 1.25 },
{ "label": "K40 (D0,F4)", "x": 0, "y": 2.25, "w": 1.5 },
{ "label": "K50 (D1,F4)", "x": 1.5, "y": 2.25 },
{ "label": "K41 (D0,F6)", "x": 2.5, "y": 2.25 },
{ "label": "K51 (D1,F6)", "x": 3.5, "y": 2.25 },
{ "label": "K42 (D0,F7)", "x": 4.5, "y": 2.25 },
{ "label": "K52 (D1,F7)", "x": 5.5, "y": 2.25 },
{ "label": "K43 (D0,C7)", "x": 6.5, "y": 2.25 },
{ "label": "K53 (D1,C7)", "x": 7.5, "y": 2.25 },
{ "label": "K44 (D0,C6)", "x": 8.5, "y": 2.25 },
{ "label": "K54 (D1,C6)", "x": 9.5, "y": 2.25 },
{ "label": "K45 (D0,B6)", "x": 10.5, "y": 2.25 },
{ "label": "K55 (D1,B6)", "x": 11.5, "y": 2.25 },
{ "label": "K46 (D0,B5)", "x": 12.5, "y": 2.25 },
{ "label": "K56 (D1,B5)", "x": 13.5, "y": 2.25, "w": 1.5 },
{ "label": "K57 (D1,D6)", "x": 15.25, "y": 2.25 },
{ "label": "K48 (D0,D4)", "x": 16.25, "y": 2.25 },
{ "label": "K58 (D1,D4)", "x": 17.25, "y": 2.25 },
{ "label": "K60 (F1,F4)", "x": 0, "y": 3.25, "w": 1.75 },
{ "label": "K70 (F0,F4)", "x": 1.75, "y": 3.25 },
{ "label": "K61 (F1,F6)", "x": 2.75, "y": 3.25 },
{ "label": "K71 (F0,F6)", "x": 3.75, "y": 3.25 },
{ "label": "K62 (F1,F7)", "x": 4.75, "y": 3.25 },
{ "label": "K72 (F0,F7)", "x": 5.75, "y": 3.25 },
{ "label": "K63 (F1,C7)", "x": 6.75, "y": 3.25 },
{ "label": "K73 (F0,C7)", "x": 7.75, "y": 3.25 },
{ "label": "K64 (F1,C6)", "x": 8.75, "y": 3.25 },
{ "label": "K74 (F0,C6)", "x": 9.75, "y": 3.25 },
{ "label": "K65 (F1,B6)", "x": 10.75, "y": 3.25 },
{ "label": "K75 (F0,B6)", "x": 11.75, "y": 3.25 },
{ "label": "K76 (F0,B5)", "x": 12.75, "y": 3.25, "w": 2.25 },
{ "label": "K80 (D7,F4)", "x": 0, "y": 4.25, "w": 1.25 },
{ "label": "K90 (B4,F4)", "x": 1.25, "y": 4.25 },
{ "label": "K81 (D7,F6)", "x": 2.25, "y": 4.25 },
{ "label": "K91 (B4,F6)", "x": 3.25, "y": 4.25 },
{ "label": "K82 (D7,F7)", "x": 4.25, "y": 4.25 },
{ "label": "K92 (B4,F7)", "x": 5.25, "y": 4.25 },
{ "label": "K83 (D7,C7)", "x": 6.25, "y": 4.25 },
{ "label": "K93 (B4,C7)", "x": 7.25, "y": 4.25 },
{ "label": "K84 (D7,C6)", "x": 8.25, "y": 4.25 },
{ "label": "K94 (B4,C6)", "x": 9.25, "y": 4.25 },
{ "label": "K85 (D7,B6)", "x": 10.25, "y": 4.25 },
{ "label": "K95 (B4,B6)", "x": 11.25, "y": 4.25 },
{ "label": "K86 (D7,B5)", "x": 12.25, "y": 4.25, "w": 1.75 },
{ "label": "K96 (B4,B5)", "x": 14, "y": 4.25 },
{ "label": "K88 (D7,D4)", "x": 16.25, "y": 4.25 },
{ "label": "KA0 (D5,F4)", "x": 0, "y": 5.25, "w": 1.5 },
{ "label": "KB0 (D3,F4)", "x": 1.5, "y": 5.25 },
{ "label": "KA1 (D5,F6)", "x": 2.5, "y": 5.25, "w": 1.5 },
{ "label": "KB3 (D3,C7)", "x": 4, "y": 5.25, "w": 7 },
{ "label": "KA6 (D5,B5)", "x": 11, "y": 5.25, "w": 1.5 },
{ "label": "KB6 (D3,B5)", "x": 12.5, "y": 5.25 },
{ "label": "KA7 (D5,D6)", "x": 13.5, "y": 5.25, "w": 1.5 },
{ "label": "KB7 (D3,D6)", "x": 15.25, "y": 5.25 },
{ "label": "KA8 (D5,D4)", "x": 16.25, "y": 5.25 },
{ "label": "KB8 (D3,D4)", "x": 17.25, "y": 5.25 }
]
}
}
}
30 changes: 30 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/keymaps/default/keymap.c
Original file line number Diff line number Diff line change
@@ -0,0 +1,30 @@
/* Copyright 2022 SawnsProjects
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H


const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

[0] = LAYOUT_all(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,

KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
)
};
Original file line number Diff line number Diff line change
@@ -0,0 +1 @@
# The default keymap for Amber80 Solder
54 changes: 54 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/keymaps/via/keymap.c
Original file line number Diff line number Diff line change
@@ -0,0 +1,54 @@
/* Copyright 2022 SawnsProjects
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H


const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

[0] = LAYOUT_all(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS,

KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_KANA, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[1] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[2] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[3] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};
Original file line number Diff line number Diff line change
@@ -0,0 +1 @@
# The VIA keymap for Amber80 Solder
2 changes: 2 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/keymaps/via/rules.mk
Original file line number Diff line number Diff line change
@@ -0,0 +1,2 @@
VIA_ENABLE = yes
LTO_ENABLE = yes
24 changes: 24 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/readme.md
Original file line number Diff line number Diff line change
@@ -0,0 +1,24 @@
# Amber80 solder

![Amber80](https://i.imgur.com/ygUgpqZh.jpg)

A TKL keyboard sold in several variants.

* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
* Hardware Supported: Amber80
* Hardware Availability: Comming Soon

Make example for this keyboard (after setting up your build environment):

make sawnsprojects/amber80/solder:default


## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `RESET` if it is available

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
18 changes: 18 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/rules.mk
Original file line number Diff line number Diff line change
@@ -0,0 +1,18 @@
# MCU name
MCU = atmega32u4

# Bootloader selection
BOOTLOADER = atmel-dfu

# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
17 changes: 17 additions & 0 deletions keyboards/sawnsprojects/amber80/solder/solder.c
Original file line number Diff line number Diff line change
@@ -0,0 +1,17 @@
/* Copyright 2022 SawnsProjects
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

#include "solder.h"
Loading

0 comments on commit 797e4b9

Please sign in to comment.