Skip to content
Library Compile

Rework #224

Sign in to view logs

Rework

Rework #224

Triggered via push August 4, 2024 20:12
@Candas1Candas1
pushed 6b3fa16
new_adc
Status Failure
Total duration 6m 31s
Artifacts –

ccpp.yml

on: push
lint
7s
lint
Matrix: Test compiling
Fit to window
Zoom out
Zoom in

Annotations

59 errors and 2 warnings
Test compiling (arduino:avr:leonardo)
Compile of open_loop_position_example failed
Test compiling (arduino:avr:leonardo)
Process completed with exit code 1.
Test compiling (arduino:avr:mega)
Compile of single_full_control_example failed
Test compiling (arduino:avr:mega)
Compile of single_full_control_example failed
Test compiling (arduino:avr:mega)
Compile of single_full_control_example failed
Test compiling (arduino:avr:mega)
Compile of single_full_control_example failed
Test compiling (arduino:avr:mega)
Process completed with exit code 1.
Test compiling (arduino:sam:arduino_due_x)
Compile of single_full_control_example failed
Test compiling (arduino:sam:arduino_due_x)
Compile of single_full_control_example failed
Test compiling (arduino:sam:arduino_due_x)
Compile of single_full_control_example failed
Test compiling (arduino:sam:arduino_due_x)
Compile of single_full_control_example failed
Test compiling (arduino:sam:arduino_due_x)
Process completed with exit code 1.
Test compiling (arduino:mbed_rp2040:pico)
Compile of open_loop_position_example failed
Test compiling (arduino:mbed_rp2040:pico)
Process completed with exit code 1.
Test compiling (arduino:samd:nano_33_iot)
Compile of nano33IoT_velocity_control failed
Test compiling (arduino:samd:nano_33_iot)
Compile of smartstepper_control failed
Test compiling (arduino:samd:nano_33_iot)
Process completed with exit code 1.
Test compiling (adafruit:samd:adafruit_metro_m4)
Compile of single_full_control_example failed
Test compiling (adafruit:samd:adafruit_metro_m4)
Compile of single_full_control_example failed
Test compiling (adafruit:samd:adafruit_metro_m4)
Compile of single_full_control_example failed
Test compiling (adafruit:samd:adafruit_metro_m4)
Compile of single_full_control_example failed
Test compiling (adafruit:samd:adafruit_metro_m4)
Process completed with exit code 1.
Test compiling (arduino:avr:uno)
Compile of commander_extend_example failed
Test compiling (arduino:avr:uno)
Compile of commander_no_serial failed
Test compiling (arduino:avr:uno)
Compile of commander_tune_custom_loop failed
Test compiling (arduino:avr:uno)
Compile of step_dir_motor_example failed
Test compiling (arduino:avr:uno)
Compile of step_dir_listener_software_interrupt failed
Test compiling (arduino:avr:uno)
Compile of step_dir_listener_simple failed
Test compiling (arduino:avr:uno)
Compile of stepper_driver_2pwm_standalone failed
Test compiling (arduino:avr:uno)
Compile of bldc_driver_3pwm_standalone failed
Test compiling (arduino:avr:uno)
Compile of bldc_driver_6pwm_standalone failed
Test compiling (arduino:avr:uno)
Compile of stepper_driver_4pwm_standalone failed
Test compiling (STMicroelectronics:stm32:GenF4:pnum=GENERIC_F405RGTX)
Compile of odrive_example_encoder failed
Test compiling (STMicroelectronics:stm32:GenF4:pnum=GENERIC_F405RGTX)
Compile of odrive_example_spi failed
Test compiling (STMicroelectronics:stm32:GenF4:pnum=GENERIC_F405RGTX)
Compile of stm32_current_control_low_side failed
Test compiling (STMicroelectronics:stm32:GenF4:pnum=GENERIC_F405RGTX)
Process completed with exit code 1.
Test compiling (esp32:esp32:esp32s3)
Compile of esp32_position_control failed
Test compiling (esp32:esp32:esp32s3)
Compile of esp32_position_control failed
Test compiling (esp32:esp32:esp32s3)
Compile of esp32_i2c_dual_bus_example failed
Test compiling (esp32:esp32:esp32s3)
Process completed with exit code 1.
Test compiling (esp32:esp32:esp32s2)
Compile of bldc_driver_3pwm_standalone failed
Test compiling (esp32:esp32:esp32s2)
Compile of stepper_driver_2pwm_standalone failed
Test compiling (esp32:esp32:esp32s2)
Compile of stepper_driver_4pwm_standalone failed
Test compiling (esp32:esp32:esp32s2)
Process completed with exit code 1.
Test compiling (esp32:esp32:esp32doit-devkit-v1)
Compile of esp32_position_control failed
Test compiling (esp32:esp32:esp32doit-devkit-v1)
Compile of esp32_position_control failed
Test compiling (esp32:esp32:esp32doit-devkit-v1)
Compile of esp32_i2c_dual_bus_example failed
Test compiling (esp32:esp32:esp32doit-devkit-v1)
Compile of esp32_current_control_low_side failed
Test compiling (esp32:esp32:esp32doit-devkit-v1)
Compile of esp32_spi_alt_example failed
Test compiling (esp32:esp32:esp32doit-devkit-v1)
Process completed with exit code 1.
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of single_full_control_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of single_full_control_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of single_full_control_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of single_full_control_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of stm32_spi_alt_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of double_full_control_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of double_full_control_example failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Compile of stm32_current_control_low_side failed
Test compiling (STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_F411RE)
Process completed with exit code 1.
lint
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
lint
The following actions uses Node.js version which is deprecated and will be forced to run on node20: actions/checkout@v2, arduino/arduino-lint-action@v1. For more info: https://github.blog/changelog/2024-03-07-github-actions-all-actions-will-run-on-node20-instead-of-node16-by-default/