Fluent Bit Plugin for Amazon Kinesis Data Streams

A Fluent Bit output plugin for Amazon Kinesis Data Streams.

Security disclosures

If you think you’ve found a potential security issue, please do not post it in the Issues. Instead, please follow the instructions here or email AWS security directly at aws-security@amazon.com.

Usage

Run make to build ./bin/kinesis.so. Then use with Fluent Bit:

./fluent-bit -e ./kinesis.so -i cpu \
-o kinesis \
-p "region=us-west-2" \
-p "stream=test-stream"

For building Windows binaries, we need to install mingw-64w for cross-compilation. The same can be done using-

sudo apt-get install -y gcc-multilib gcc-mingw-w64

After this step, run make windows-release. Then use with Fluent Bit on Windows:

./fluent-bit.exe -e ./kinesis.dll -i dummy `
-o kinesis `
-p "region=us-west-2" `
-p "stream=test-stream"

Plugin Options

• region: The region which your Kinesis Data Stream is in.
• stream: The name of the Kinesis Data Stream that you want log records sent to.
• partition_key: A partition key is used to group data by shard within a stream. A Kinesis Data Stream uses the partition key that is associated with each data record to determine which shard a given data record belongs to. For example, if your logs come from Docker containers, you can use container_id as the partition key, and the logs will be grouped and stored on different shards depending upon the id of the container they were generated from. As the data within a shard are coarsely ordered, you will get all your logs from one container in one shard roughly in order. Nested partition key is supported and you can use -> to point to your target key which is nested under another key. For example, your partition_key could be kubernetes->pod_name. If you don't set a partition key or put an invalid one, a random key will be generated, and the logs will be directed to random shards. If the partition key is invalid, the plugin will print an warning message.
• data_keys: By default, the whole log record will be sent to Kinesis. If you specify key name(s) with this option, then only those keys and values will be sent to Kinesis. For example, if you are using the Fluentd Docker log driver, you can specify data_keys log and only the log message will be sent to Kinesis. If you specify multiple keys, they should be comma delimited.
• log_key: By default, the whole log record will be sent to Kinesis. If you specify a key name with this option, then only the value of that key will be sent to Kinesis. For example, if you are using the Fluentd Docker log driver, you can specify log_key log and only the log message will be sent to Kinesis.
• role_arn: ARN of an IAM role to assume (for cross account access).
• endpoint: Specify a custom endpoint for the Kinesis Streams API.
• sts_endpoint: Specify a custom endpoint for the STS API; used to assume your custom role provided with role_arn.
• append_newline: If you set append_newline as true, a newline will be addded after each log record.
• time_key: Add the timestamp to the record under this key. By default the timestamp from Fluent Bit will not be added to records sent to Kinesis.
• time_key_format: strftime compliant format string for the timestamp; for example, %Y-%m-%dT%H:%M:%S%z. This option is used with time_key. You can also use %L for milliseconds and %f for microseconds. If you are using ECS FireLens, make sure you are running Amazon ECS Container Agent v1.42.0 or later, otherwise the timestamps associated with your container logs will only have second precision.
• experimental_concurrency: Specify a limit of concurrent go routines for flushing records to kinesis. By default experimental_concurrency is set to 0 and records are flushed in Fluent Bit's single thread. This means that requests to Kinesis will block the execution of Fluent Bit. If this value is set to 4 for example then calls to Flush records from fluentbit will spawn concurrent go routines until the limit of 4 concurrent go routines are running. Once the experimental_concurrency limit is reached calls to Flush will return a retry code. The upper limit of the experimental_concurrency option is 10. WARNING: Enabling experimental_concurrency can lead to data loss if the retry count is reached. Enabling concurrency will increase resource usage (memory and CPU).
• experimental_concurrency_retries: Specify a limit to the number of retries concurrent goroutines will attempt. By default 4 retries will be attempted before records are dropped.
• aggregation: Setting aggregation to true will enable KPL aggregation of records sent to Kinesis. This feature changes the behavior of the partition_key feature. See the KPL aggregation section below for more details.
• compression: Specify an algorithm for compression of each record. Supported compression algorithms are zlib and gzip. By default this feature is disabled and records are not compressed.
• replace_dots: Replace dot characters in key names with the value of this option. For example, if you add replace_dots _ in your config then all occurrences of . will be replaced with an underscore. By default, dots will not be replaced.
• http_request_timeout: Specify a timeout (in seconds) for the underlying AWS SDK Go HTTP call when sending records to Kinesis. By default, a timeout of 0 is used, indicating no timeout. Note that even with no timeout, the default behavior of the AWS SDK Go library may still lead to an eventual timeout.
• aggregation_maximum_record_size: defines aggregation maximum record size. Default is 1MB.
• skip_aggregation_record_size: defines max record size that should be included in an aggregation. Default is 20KB.

Permissions

The plugin requires kinesis:PutRecords permissions.

Credentials

This plugin uses the AWS SDK Go, and uses its default credential provider chain. If you are using the plugin on Amazon EC2 or Amazon ECS or Amazon EKS, the plugin will use your EC2 instance role or ECS Task role permissions or EKS IAM Roles for Service Accounts for pods. The plugin can also retrieve credentials from a shared credentials file, or from the standard AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, AWS_SESSION_TOKEN environment variables.

Environment Variables

• FLB_LOG_LEVEL: Set the log level for the plugin. Valid values are: debug, info, and error (case insensitive). Default is info. Note: Setting log level in the Fluent Bit Configuration file using the Service key will not affect the plugin log level (because the plugin is external).
• SEND_FAILURE_TIMEOUT: Allows you to configure a timeout if the plugin can not send logs to Kinesis Streams. The timeout is specified as a Golang duration, for example: 5m30s. If the plugin has failed to make any progress for the given period of time, then it will exit and kill Fluent Bit. This is useful in scenarios where you want your logging solution to fail fast if it has been misconfigured (i.e. network or credentials have not been set up to allow it to send to Kinesis Streams).

Fluent Bit Versions

This plugin has been tested with Fluent Bit 1.2.0+. It may not work with older Fluent Bit versions. We recommend using the latest version of Fluent Bit as it will contain the newest features and bug fixes.

Example Fluent Bit Config File

[INPUT]
    Name        forward
    Listen      0.0.0.0
    Port        24224

[OUTPUT]
    Name            kinesis
    Match           *
    region          us-west-2
    stream          my-kinesis-stream-name
    partition_key   container_id
    append_newline  true
    replace_dots    _

AWS for Fluent Bit

We distribute a container image with Fluent Bit and this plugin.

GitHub

github.com/aws/aws-for-fluent-bit

Amazon ECR Public Gallery

aws-for-fluent-bit

Our images are available in Amazon ECR Public Gallery. You can download images with different tags by following command:

docker pull public.ecr.aws/aws-observability/aws-for-fluent-bit:<tag>

For example, you can pull the image with latest version by:

docker pull public.ecr.aws/aws-observability/aws-for-fluent-bit:latest

If you see errors for image pull limits, try log into public ECR with your AWS credentials:

aws ecr-public get-login-password --region us-east-1 | docker login --username AWS --password-stdin public.ecr.aws

You can check the Amazon ECR Public official doc for more details.

Docker Hub

amazon/aws-for-fluent-bit

Amazon ECR

You can use our SSM Public Parameters to find the Amazon ECR image URI in your region:

aws ssm get-parameters-by-path --path /aws/service/aws-for-fluent-bit/

For more see our docs.

KPL aggregation

KPL aggregation can be enabled by setting the aggregation parameter to true (default is false). With aggregation enabled each Record in the PutRecords request can contain multiple serialized records in the KCL protobuf structure. This batch of records will only count as a single record towards the Kinesis records per second limit (currently 1000 records/sec per shard).

The advantages of enabling KPL aggregation are:

• Increased throughput, and decreased Kinesis costs for smaller records (records less than 1K).
• Less overhead in error checking PutRecords results (fewer PutRecords results to verify).
• Firehose will de-aggregate the records automatically (free de-aggregation if Firehose is leveraged).

The disadvantages are:

• The flush time (or buffer size) will need to be tuned to take advantage of aggregation (more on that below).
• You must use the KCL library to read data from kinesis to de-aggregate the protobuf serialization (if Firehose isn't the consumer).
• The partition_key feature isn't fully compatible with aggregation given multiple records are in each PutRecord structure. The partition_key value of the first record in the batch will be used to route the entire batch to a given shard. Given this limitation, using both partition_key and aggregation simultaneously requires careful consideration. In most container log use cases, all logs from a single container/pod are sent in the same stream, thus if you use the pod/container as the partition key, it should still work as expected since all records in an aggregated batch can use the same partition key. In other use cases, aggregation will cause records that should have had different partition keys to have the same partition key.

KPL Aggregated Record Reference: https://github.com/awslabs/amazon-kinesis-producer/blob/master/aggregation-format.md

Tuning for aggregation

When using aggregation the buffers and flush time may need to be tuned. For low volume use cases a longer flush time maybe preferable to take full advantage of the aggregation cost savings.

More specifically, increasing the flush value will ensure the most records are aggregated taking full advantage of the cost savings.

[SERVICE]
     Flush 20

Example Fluent Bit Aggregation Config File

[SERVICE]
     Flush 20

[INPUT]
    Name        forward
    Listen      0.0.0.0
    Port        24224

[OUTPUT]
    Name            kinesis
    Match           *
    region          us-west-2
    stream          my-kinesis-stream-name
    aggregation     true
    append_newline  true

ZLIB Compression

Enabling zlib compression will compress each record individually reducing the network bandwidth required to send logs. Using this feature in conjunction with aggregation can greatly reduce the number of Kinesis shards required.

Compression Advantages:

• Reduces network bandwidth required
• Reduces Kinesis shard count in some scenarios

Compression Disadvantages:

• Fluentbit will require more CPU and memory to send records
• A consumer must decompress the records

Example config:

[SERVICE]
     Flush 20

[INPUT]
    Name        forward
    Listen      0.0.0.0
    Port        24224

[OUTPUT]
    Name            kinesis
    Match           *
    region          us-west-2
    stream          my-kinesis-stream-name
    compression     zlib
    append_newline  true