Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it #1497

Closed
nathanchance opened this issue Nov 4, 2021 · 29 comments
Closed

error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it #1497

nathanchance opened this issue Nov 4, 2021 · 29 comments
Assignees
@nathanchance
Labels
[ARCH] x86_64 This bug impacts ARCH=x86_64 [BUG] linux A bug that should be fixed in the mainline kernel. [BUG] llvm (main) A bug in an unreleased version of LLVM (this label is appropriate for regressions) [CONFIG] allmodconfig Issue affects allmodconfig on certain architectures [FIXED][LINUX] 5.16 This bug was fixed in Linux 5.16
Milestone
allmodconfig

Comments

@nathanchance
Copy link
Member

After llvm/llvm-project@a8083d4, I see the following errors with x86_64 allmodconfig

../drivers/power/reset/ltc2952-poweroff.c:164:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
../drivers/power/reset/ltc2952-poweroff.c:164:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
../drivers/power/reset/ltc2952-poweroff.c:165:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

../drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                        delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
../drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
1 error generated.

It seems that x87 registers are turned off in arch/x86/Makefile with the -mno-80387 flag so I suppose this error makes sense. Should we just turn these constants into integers (perhaps substituting the 1E6L with USEC_PER_SEC)?
@nathanchance nathanchance added [BUG] linux A bug that should be fixed in the mainline kernel. [BUG] llvm (main) A bug in an unreleased version of LLVM (this label is appropriate for regressions) labels Nov 4, 2021
@nickdesaulniers
Copy link
Member

are these expressions overflowing? In the case of ktime_set, the second parameter is an unsigned long. ULONG_MAX for x86_64 is 4,294,967,295. 1E6L is only 1,000,000. So looks like no, there is no overflow.

@nickdesaulniers
Copy link
Member

Is 1E6L a floating point literal?

@nathanchance
Copy link
Member Author

Yes, I had to look that up: https://en.cppreference.com/w/cpp/language/floating_literal

@nickdesaulniers
Copy link
Member

probably should remove the L suffix.

@nickdesaulniers nickdesaulniers added [ARCH] x86_64 This bug impacts ARCH=x86_64 [CONFIG] allmodconfig Issue affects allmodconfig on certain architectures labels Nov 4, 2021
@nathanchance
Copy link
Member Author

I don't really see the point of these calculations using floating point values?

wde_interval and trigger_delay are both ktime_t, which is a 64-bit signed integer. ktime_set()'s second parameter is an unsigned long (integer). I think the 1E6L can just be turned into 1000000L, which is USEC_PER_SEC.

@nickdesaulniers
Copy link
Member

I think the 1E6L can just be turned into 1000000L

Or perhaps just 1E6. It's surprising to me to that the L suffix means long double here and not long, which is perhaps the same mistake that the authors made. I suspect the E6 suffix changes the meaning of L suffixes on literals (which is surprising IMO).

@nathanchance
Copy link
Member Author

Yes, the E6 makes the literal a double: https://godbolt.org/z/cbbKvTWT8

Adding L only changes it from double to long double.

fengguang pushed a commit to 0day-ci/linux that referenced this issue Nov 4, 2021
@nathanchance @intel-lab-lkp
power: reset: ltc2952: Fix use of floating point literals
778ba15 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use USEC_PER_SEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
@nathanchance
Copy link
Member Author

Patches submitted:

https://lore.kernel.org/r/20211104215047.663411-1-nathan@kernel.org/
https://lore.kernel.org/r/20211104215923.719785-1-nathan@kernel.org/

@nathanchance nathanchance self-assigned this Nov 4, 2021
@nathanchance nathanchance added the [PATCH] Submitted A patch has been submitted for review label Nov 4, 2021
fengguang pushed a commit to 0day-ci/linux that referenced this issue Nov 4, 2021
@nathanchance @intel-lab-lkp
usb: dwc2: hcd_queue: Fix use of floating point literal
fe1e519 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type.  Use USEC_PER_SEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
fengguang pushed a commit to 0day-ci/linux that referenced this issue Nov 5, 2021
@nathanchance @intel-lab-lkp
usb: dwc2: hcd_queue: Fix use of floating point literal
105533c 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
@nathanchance
Copy link
Member Author

v2:

https://lore.kernel.org/r/20211105152049.2522250-1-nathan@kernel.org/
https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org/

fengguang pushed a commit to 0day-ci/linux that referenced this issue Nov 5, 2021
@nathanchance @intel-lab-lkp
power: reset: ltc2952: Fix use of floating point literals
1fb2266 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
samitolvanen pushed a commit to samitolvanen/linux that referenced this issue Nov 10, 2021
@nathanchance @samitolvanen
power: reset: ltc2952: Fix use of floating point literals
1a408b8 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
samitolvanen pushed a commit to samitolvanen/linux that referenced this issue Nov 10, 2021
@nathanchance @samitolvanen
usb: dwc2: hcd_queue: Fix use of floating point literal
0cd68b2 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
@nathanchance
Copy link
Member Author

drivers/power/reset patch accepted: https://git.kernel.org/sre/linux-power-supply/c/644106cdb89844be2496b21175b7c0c2e0fab381

@nathanchance nathanchance added the [PATCH] Accepted A submitted patch has been accepted upstream label Nov 16, 2021
@nathanchance
Copy link
Member Author

drivers/usb/dwc2 patch accepted: https://git.kernel.org/gregkh/usb/c/310780e825f3ffd211b479b8f828885a6faedd63

@nathanchance nathanchance removed the [PATCH] Submitted A patch has been submitted for review label Nov 17, 2021
roxell pushed a commit to roxell/linux that referenced this issue Nov 18, 2021
@nathanchance @gregkh
usb: dwc2: hcd_queue: Fix use of floating point literal
310780e 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ramosian-glider pushed a commit to google/kmsan that referenced this issue Nov 24, 2021
@nathanchance @ramosian-glider
usb: dwc2: hcd_queue: Fix use of floating point literal
75a3a04 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-block that referenced this issue Nov 27, 2021
@nathanchance
usb: dwc2: hcd_queue: Fix use of floating point literal
3403798 
commit 310780e upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-block that referenced this issue Nov 27, 2021
@nathanchance
usb: dwc2: hcd_queue: Fix use of floating point literal
fe680ab 
commit 310780e upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2 pushed a commit to ammarfaizi2/linux-block that referenced this issue Nov 27, 2021
@nathanchance
usb: dwc2: hcd_queue: Fix use of floating point literal
da8b62a 
commit 310780e upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dheeraj3031A pushed a commit to Dheeraj3031A/kernel_oplus_RMX3461 that referenced this issue Jan 31, 2024
@nathanchance @Dheeraj3031A
power: reset: ltc2952: Fix use of floating point literals
0f0b49e 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kevios12 pushed a commit to kevios12/android_kernel_samsung_universal7885 that referenced this issue Feb 16, 2024
@nathanchance @kevios12
power: reset: ltc2952: Fix use of floating point literals
69c6b85 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RT1648 pushed a commit to RT1648/android_kernel_asus_sdm660 that referenced this issue Feb 17, 2024
@nathanchance @RT1648
usb: dwc2: hcd_queue: Fix use of floating point literal
17b13f1 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RT1648 pushed a commit to RT1648/android_kernel_asus_sdm660 that referenced this issue Feb 17, 2024
@nathanchance @RT1648
usb: dwc2: hcd_queue: Fix use of floating point literal
9c8e80b 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RT1648 pushed a commit to RT1648/android_kernel_asus_sdm660 that referenced this issue Feb 17, 2024
@nathanchance @RT1648
power: reset: ltc2952: Fix use of floating point literals
ce80035 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kevios12 pushed a commit to kevios12/android_kernel_samsung_universal7885 that referenced this issue Feb 24, 2024
@nathanchance @kevios12
power: reset: ltc2952: Fix use of floating point literals
a5ac1f4 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
jinghao-jia pushed a commit to rosalab/linux that referenced this issue Apr 7, 2024
@nathanchance @jinghao-jia
usb: dwc2: hcd_queue: Fix use of floating point literal
852ad37 
A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Huawei-Dev pushed a commit to Huawei-Dev/android_kernel_huawei_hi3660 that referenced this issue Apr 13, 2024
@nathanchance @Huawei-Dev
power: reset: ltc2952: Fix use of floating point literals
b2c2ba4 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huawei-Dev pushed a commit to Huawei-Dev/android_kernel_huawei_hi3660 that referenced this issue May 20, 2024
@nathanchance @Huawei-Dev
power: reset: ltc2952: Fix use of floating point literals
96c8ae4 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huawei-Dev pushed a commit to Huawei-Dev/android_kernel_huawei_hi3660 that referenced this issue May 21, 2024
@nathanchance @Huawei-Dev
power: reset: ltc2952: Fix use of floating point literals
05b3ad7 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dek0der pushed a commit to dek0der/kernel_realme_RMX3031 that referenced this issue Jun 14, 2024
@nathanchance @dek0der
usb: dwc2: hcd_queue: Fix use of floating point literal
600fbf5 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dek0der pushed a commit to dek0der/kernel_realme_RMX3031 that referenced this issue Jun 14, 2024
@nathanchance @dek0der
power: reset: ltc2952: Fix use of floating point literals
21422a3 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZorEl212 pushed a commit to ZorEl212/Cuh-Kernel that referenced this issue Jun 15, 2024
@nathanchance @ZorEl212
power: reset: ltc2952: Fix use of floating point literals
4c9d82f 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ZorEl212 pushed a commit to ZorEl212/android_kernel_xiaomi_ginkgo that referenced this issue Jul 23, 2024
@nathanchance @ZorEl212
power: reset: ltc2952: Fix use of floating point literals
6af24eb 
commit 644106c upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FakeShell pushed a commit to FuriLabs/linux-furiphone-krypton that referenced this issue Aug 20, 2024
@nathanchance @FakeShell
usb: dwc2: hcd_queue: Fix use of floating point literal
47732c1 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FakeShell pushed a commit to FuriLabs/linux-furiphone-krypton that referenced this issue Aug 20, 2024
@nathanchance @FakeShell
power: reset: ltc2952: Fix use of floating point literals
ac575a7 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dragonGR pushed a commit to dragonGR/kernel_samsung_sm7125 that referenced this issue Sep 8, 2024
@nathanchance @dragonGR
power: reset: ltc2952: Fix use of floating point literals
b40e445 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
deflamingq pushed a commit to deflamingq/kernel_asus_sdm660 that referenced this issue Nov 3, 2024
@nathanchance @deflamingq
usb: dwc2: hcd_queue: Fix use of floating point literal
c5b155a 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
deflamingq pushed a commit to deflamingq/kernel_asus_sdm660 that referenced this issue Nov 3, 2024
@nathanchance @deflamingq
power: reset: ltc2952: Fix use of floating point literals
77de2ef 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xnnnsets pushed a commit to xnnnsets/android_kernel_samsung_a34x that referenced this issue Nov 11, 2024
@nathanchance
usb: dwc2: hcd_queue: Fix use of floating point literal
4adf639 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xnnnsets pushed a commit to xnnnsets/android_kernel_samsung_a34x that referenced this issue Nov 12, 2024
@nathanchance
power: reset: ltc2952: Fix use of floating point literals
27bf942 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey0800770 pushed a commit to Andrey0800770/samsung_sdm845-kernel that referenced this issue Dec 24, 2024
@nathanchance @Andrey0800770
power: reset: ltc2952: Fix use of floating point literals
3d9a0c8 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AndroidHQ254 pushed a commit to A325F/android_kernel_samsung_a32 that referenced this issue Jan 3, 2025
@nathanchance @AndroidHQ254
power: reset: ltc2952: Fix use of floating point literals
6e74aac 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ravindu644 pushed a commit to ravindu644/kernel_samsung_a01 that referenced this issue Jan 9, 2025
@nathanchance @ravindu644
power: reset: ltc2952: Fix use of floating point literals
10d1046 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huawei-Dev pushed a commit to Huawei-Dev/android_kernel_huawei_kirin710 that referenced this issue Jan 21, 2025
@nathanchance @Huawei-Dev
power: reset: ltc2952: Fix use of floating point literals
38c2487 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195314fab]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
somestupidgirl pushed a commit to somestupidgirl/exynos-linux-stable that referenced this issue Jan 27, 2025
@nathanchance @somestupidgirl
power: reset: ltc2952: Fix use of floating point literals
5f14e6f 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DaemonMCR pushed a commit to samsungexynos850/upstream_exynos850 that referenced this issue Feb 16, 2025
@nathanchance @gregkh
usb: dwc2: hcd_queue: Fix use of floating point literal
c964b1b 
commit 310780e825f3ffd211b479b8f828885a6faedd63 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

 drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
                         delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
                                             ^
 drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
 #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
                                 ^
 1 error generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use NSEC_PER_MSEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.

Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: John Keeping <john@metanate.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IamCOD3X pushed a commit to IamCOD3X/android_kernel_xiaomi_onclite that referenced this issue Feb 21, 2025
@nathanchance @IamCOD3X
power: reset: ltc2952: Fix use of floating point literals
e2eedaf 
commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                                  ^
drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->wde_interval = 300L * 1E6L;
                           ^
drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires  'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
        data->trigger_delay = ktime_set(2, 500L*1E6L);
                                               ^
3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.

There is no visible reason for floating point values in this driver, as
the values are only assigned to integer types. Use NSEC_PER_MSEC, which
is the same integer value as '1E6L', to avoid changing functionality but
fix the error.

Fixes: 6647156 ("power: reset: add LTC2952 poweroff driver")
Link: ClangBuiltLinux/linux#1497
Link: llvm/llvm-project@a8083d4
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[nathan: Resolve conflict due to lack of 8b0e195]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@nathanchance nathanchance

Labels
[ARCH] x86_64 This bug impacts ARCH=x86_64 [BUG] linux A bug that should be fixed in the mainline kernel. [BUG] llvm (main) A bug in an unreleased version of LLVM (this label is appropriate for regressions) [CONFIG] allmodconfig Issue affects allmodconfig on certain architectures [FIXED][LINUX] 5.16 This bug was fixed in Linux 5.16
Projects
None yet
Milestone
allmodconfig
Development

No branches or pull requests
4 participants
@nickdesaulniers @phoebewang @erichkeane @nathanchance