The sbom-utility was designed to be an API platform to validate, analyze and edit Bills-of-Materials (BOMs). Initially, it was created to validate either CycloneDX or SPDX-formatted BOMs against official, versioned JSON schemas as published by their respective standards communities.
- Organizations may also design and supply "custom JSON schema" variants to the validate command which are perhaps designed to enforce additional data-compliance requirements.
The utility also offers commands that support analysis and editing of BOM document data including trim, patch (IETF RFC 6902) and diff (experimental).
In addition, the utility features "report" commands that can easily extract, filter, list and summarize component, service, license, resource, vulnerability and other BOM information using the utility's powerful, SQL-like query command. The query command allows select-ion of specific data from anywhere in the BOM document where data values match specified (regex) patterns.
- Report output can be produced in several formats (e.g.,
txt,csv,md(markdown) andjson) to accommodate further processing.
Note: This utility supports all CycloneDX BOM variants, such as Software (SBOM), Hardware (HBOM), Manufacturing (MBOM), Machine Learning and AI (MLBOM), Cryptographic (CBOM), etc.
The following commands, which operate against input BOMs and their data, are offered by the utility:
Command [subcommand] |
Description |
|---|---|
| validate | Enables validation of SBOMs against their declared format (e.g., SPDX, CycloneDX) and version (e.g., "2.3", "1.6", etc.) using their JSON schemas. |
| patch | Applies a JSON patch file, as defined by IETF RFC 6902, to an input JSON BOM file. |
| trim | Removes specified JSON information from the input JSON BOM document and produce output BOMs with reduced or targeted sets of information. A "SQL-like" set of parameters allows for fine-grained specification of which fields should be trimmed from which document paths. |
| diff | Experimental1: Displays the delta between two similar BOM versions in JSON (diff) patch format as defined by IETF RFC 6902. Please read "recommendations" before running. |
| query | Retrieves JSON data from BOMs using SQL-style query statements (i.e., --select <data fields> --from <BOM object> --where <field=regex>). The JSON data can be used to create custom listings or reports. |
component list |
Produces filterable listings of hardware or software components declared in the BOM. |
license list |
Produces filterable listings of license data declared in the BOM along with the associated component or service. Includes "usage policy" determinations as declared in the license.json configuration file. |
license policy |
Produces filterable listings of software and data license information and associated license usage policies as defined a license.json configuration file. |
resource list |
Produces filterable listings of resources (i.e., components and services) declared in the BOM. |
schema list |
Produces filterable listings of schema formats, versions and variants supported by the validation command.Note: Customized JSON schemas can also be permanently configured as named schema "variants" within the utility's configuration file (see the schema command's adding schemas section). |
vulnerability list |
Produces filterable listings of vulnerabilities declared in the BOM (i.e., CycloneDX Vulnerability Exploitability eXchange (VEX)) data or independently stored CycloneDX Vulnerability Disclosure Report (VDR) data stored in the BOM format. |
Experimental commands: Testing, feedback and helpful suggestions and code commits are appreciated on experimental commands.
- Installation
- Running
- Commands
- Contributing
- Design considerations
- Development
- Testing
- Releasing
- BOM References
Download and decompress the correct archive file (i.e., .tar for Unix/Linux systems and .zip for Windows) for your target system's architecture and operating system from the releases page within this repository.
The source archive will contain the following files under the root directory:
sbom-utility- binary executable. This is all most need for non-customized configurations.LICENSE- the software license for the utility (i.e. Apache 2)sbom-utility-<version>.sbom.json- a simple Software Bill-of-Materials (SBOM) for the utility
as well as sample configuration files:
config.json(optional) - copy of the default schema configuration file for optional customization (to be passed on the command line)license.json(optional) - copy of the default license policy configuration file for optional customization (to be passed on the command line)custom.json(experimental, unused) - custom validation configuration file
For convenience, the default config.json and optional license.json configuration files have been embedded in the executable and used. You can provide your own versions of these files on the command line using the --config-schema or --config-license flags respectively.
- Note: When providing configuration files using command line flags, the executable attempts to load them from the same path where the executable is run from. If you choose to keep them in a different directory, you will have to supply their location relative to the executable along with the filename.
On MacOS, the utility is not a registered Apple application and may warn you that it cannot open it the first time. If so, you will need to explicitly permit the executable to be "opened" on your system acknowledging it trusted. This process is initiated from the Finder application by using ctrl-click on the executable file and agreeing using the "Open" button.
This section provides detailed descriptions of all commands, supported flags and output formats along with usage examples.
All commands generate consistent exit codes as well as share some persistent flags which are described here:
- Exit codes: Including:
0: no error,1: application error,2: validation error, etc. - Persistent flags Including:
--input,--output,--format,--quiet,--where, etc.
Convenient links to each command:
- validate: Validates BOM data against declared or required JSON schema.
- trim: Removes uninteresting or necessary fields and data from a BOM.
- patch: Patches BOMs using IETF RFC 6902 records.
- diff: (Experimental): Displays the differences between two similar BOMs. Please read recommendations before executing.
- query: Extracts JSON objects and fields from a BOM using SQL-like queries.
- component list: Lists all component information found in a BOM.
- license
- resource list: Lists all resource information by type (e.g., components, services).
- schema list: Lists supported JSON schemas by BOM format, version and variant.
- vulnerability list: Lists vulnerability (i.e.,
VEX) information included in a BOM or standaloneVDRBOM. - completion: Generates command-line completion scripts for the this utility.
- help: Displays help and usage information for the utility or currently specified command.
All commands return a numeric exit code (i.e., a POSIX exit code) for use in automated processing where 0 indicates success and a non-zero value indicates failure of some kind designated by the number.
The SBOM Utility always returns one of these 3 codes to accommodate logic in BASH (shell) scripting:
0= no error (valid)1= application error2= validation error
This example uses the schema list command to verify its exit code:
./sbom-utility schema listverify the exit code:
echo $?which returns 0 (zero) or "no error":
0This section describes some of the important command line flags that apply to most of the utility's commands.
- format flag: with
--format - indent flag: with
--indent - input flag: with
--inputor-i - output flag: with
--outputor-o - quiet flag: with
--quietor-q - where flag: with
--where
All list subcommands support the --format flag with the following values:
txt: text (tabbed tables)csv: Comma Separated Value (CSV), e.g., for spreadsheetsmd: Markdown (GitHub-compliant tables)
Some commands, which can output lists of JSON objects, also support JSON format using the json value.
This example uses the --format flag on the schema command to output in markdown:
./sbom-utility schema --format md -q|name|format|version|variant|file (local)|url (remote)|
|:--|:--|:--|:--|:--|:--|
|CycloneDX v1.5|CycloneDX|1.5|(latest)|schema/cyclonedx/1.5/bom-1.5.schema.json|https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.5.schema.json|
|CycloneDX v1.4|CycloneDX|1.4|(latest)|schema/cyclonedx/1.4/bom-1.4.schema.json|https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.4.schema.json|
|CycloneDX/specification/master/schema/bom-1.3-strict.schema.json|
|CycloneDX v1.3|CycloneDX|1.3|(latest)|schema/cyclonedx/1.3/bom-1.3.schema.json|https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.3.schema.json|
|CycloneDX/specification/master/schema/bom-1.2-strict.schema.json|
|CycloneDX v1.2|CycloneDX|1.2|(latest)|schema/cyclonedx/1.2/bom-1.2.schema.json|https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.2.schema.json|
|SPDX v2.3.1 (development)|SPDX|SPDX-2.3|development|schema/spdx/2.3.1/spdx-schema.json|https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3.1/schemas/spdx-schema.json|
|SPDX v2.3|SPDX|SPDX-2.3|(latest)|schema/spdx/2.3/spdx-schema.json|https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3/schemas/spdx-schema.json|
|SPDX v2.2.2|SPDX|SPDX-2.2|(latest)|schema/spdx/2.2.2/spdx-schema.json|https://raw.githubusercontent.com/spdx/spdx-spec/v2.2.2/schemas/spdx-schema.json|
|SPDX v2.2.1|SPDX|SPDX-2.2|2.2.1|schema/spdx/2.2.1/spdx-schema.json|https://raw.githubusercontent.com/spdx/spdx-spec/v2.2.1/schemas/spdx-schema.json|This flag supplies an integer to any command that encodes JSON output to determine how many spaces to indent nested JSON elements. If not specified, the default indent is 4 (spaces).
./sbom-utility query --select name,version --from metadata.component -i examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json --indent 2 -qoutput with indent 2:
{
"name": "juice-shop",
"version": "11.1.2"
}./sbom-utility query --select name,version --from metadata.component -i examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json --indent 6 -qoutput with indent 6:
{
"name": "juice-shop",
"version": "11.1.2"
}All list subcommands and the validate command support the --input-file <filename> flag (or its short-form -i <filename>) to declare file contents (i.e., BOM data) the commands will read and operate on.
All commands that support the input flag can also accept data from standard input or stdin by using the - (dash) character as the value instead of a filename.
cat examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json | ./sbom-utility resource list -i -./sbom-utility validate -i - < examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.jsonAll list subcommands and the validate command support the --output-file <filename> flag (or its short-form -o <filename>) to send formatted output to a file.
This example uses the schema command to output to a file named output.txt with format set to csv:
./sbom-utility schema --format csv -o output.csvVerify the contents of output.csv contain CSV formatted output:
cat output.csvName,Format,Version,Variant,File (local),URL (remote)
CycloneDX v1.5 (development),CycloneDX,1.5,development,schema/cyclonedx/1.5/bom-1.5-dev.schema.json,https://raw.githubusercontent.com/CycloneDX/specification/v1.5-dev/schema/bom-1.5.schema.json
CycloneDX v1.4,CycloneDX,1.4,(latest),schema/cyclonedx/1.4/bom-1.4.schema.json,https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.4.schema.json
CycloneDX v1.3,CycloneDX,1.3,(latest),schema/cyclonedx/1.3/bom-1.3.schema.json,https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.3.schema.json
CycloneDX v1.2,CycloneDX,1.2,(latest),schema/cyclonedx/1.2/bom-1.2.schema.json,https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.2.schema.json
SPDX v2.3.1 (development),SPDX,SPDX-2.3,development,schema/spdx/2.3.1/spdx-schema.json,https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3.1/schemas/spdx-schema.json
SPDX v2.3,SPDX,SPDX-2.3,(latest),schema/spdx/2.3/spdx-schema.json,https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3/schemas/spdx-schema.json
SPDX v2.2.2,SPDX,SPDX-2.2,(latest),schema/spdx/2.2.2/spdx-schema.json,https://raw.githubusercontent.com/spdx/spdx-spec/v2.2.2/schemas/spdx-schema.json
SPDX v2.2.1,SPDX,SPDX-2.2,2.2.1,schema/spdx/2.2.1/spdx-schema.json,https://raw.githubusercontent.com/spdx/spdx-spec/v2.2.1/schemas/spdx-schema.json
- Note: You can verify that
output.csvloads within a spreadsheet app like MS Excel.
All commands support the --quiet flag. By default, the utility outputs informational (INFO), warning (WARNING) and error (ERROR) text along with the actual command results to stdout. If you wish to only see the command results (JSON) or report (tables) you can run any command in "quiet mode" by simply supplying the --quiet or its short-form -q flag.
This example shows the --quiet flag being used on the schema command to turn off or "quiet" any informational output so that only the result table is displayed.
./sbom-utility schema list --quietname format version variant file (local) url (remote)
---- ------ ------- ------- ------------ ------------
CycloneDX v1.5 CycloneDX 1.5 (latest) schema/cyclonedx/1.5/bom-1.5.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.5.schema.json
CycloneDX v1.4 CycloneDX 1.4 (latest) schema/cyclonedx/1.4/bom-1.4.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.4.schema.json
CycloneDX v1.3 CycloneDX 1.3 (latest) schema/cyclonedx/1.3/bom-1.3.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.3.schema.json
CycloneDX v1.2 CycloneDX 1.2 (latest) schema/cyclonedx/1.2/bom-1.2.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.2.schema.json
SPDX v2.3.1 (development) SPDX SPDX-2.3 development schema/spdx/2.3.1/spdx-schema.json https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3.1/schemas/spdx-schema.json
...All list subcommands support the --where flag. It can be used to filter output results based upon matches to regular expressions (regex) by using the output list's column titles as keys.
Multiple key-value (i.e., column-title=regex) pairs can be provided on the same --where filter flag using commas.
Syntax: [--where key=regex[,...]]
See each command's section for contextual examples of the --where flag filter usage.
This command will parse standardized SBOMs and validate it against its declared format and version (e.g., SPDX 2.3, CycloneDX 1.6).
- Custom variants of standard JSON schemas can be used for validation by supplying the
--variantname as a flag. - Explicit JSON schemas can be specified using the
--forceflag.
Use the schema command to list supported schemas formats, versions and variants.
- A "supported" schema is already "built-in" to the utility resources along with any dependent schemas it imports.
- This means that BOM files can be validated when there is no network connection to load the schemas from remote locations (a.k.a., "off-line" mode).
Customized JSON schemas can also be permanently configured as named schema "variants" within the utility's configuration file. See adding schemas.
- Overriding default schema
- Using the
--forceflag and passing in a URI to an alternative JSON schema.
- Using the
- "Customized" schema variants, perhaps derived from standard BOM schemas, can be used for validation using the
--variantflag (e.g., industry or company-specific schemas).- Note: These variants need to be built into the utility binary as a resource.
The following flags can be used to improve performance when formatting error output results:
You can override the schema used for validation (which defaults to the schema that matches the declared format and version found in the input BOM file) by providing a different one using the --force flag. This may be useful to verify a BOM contents against a newer specification version or provide a customized schema.
- Note: The
--forceflag works with schema files with valid URIs which include URLs (e.g., 'https://') and files (e.g., 'file://').
Use the --error-limit x (default: 10) flag to reduce the formatted error result output to the first x errors. By default, only the first 10 errors are output with an informational messaging indicating x/y errors were shown.
Use the --error-value=true|false (default: true) flag to reduce the formatted error result output by not showing the value field which shows detailed information about the failing data in the BOM.
Use the --colorize=true|false (default: false) flag to add/remove color formatting to error result txt formatted output. By default, txt formatted error output is colorized to help with human readability; for automated use, it can be turned off.
Validating the "juice shop" SBOM (CycloneDX 1.2) example provided in this repository.
./sbom-utility validate -i examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json[INFO] Attempting to load and unmarshal data from: 'examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json'...
[INFO] Successfully unmarshalled data from: 'examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json'
[INFO] Determining file's BOM format and version...
[INFO] Determined BOM format, version (variant): 'CycloneDX', '1.2' (latest)
[INFO] Matching BOM schema (for validation): schema/cyclonedx/1.2/bom-1.2.schema.json
[INFO] Loading schema 'schema/cyclonedx/1.2/bom-1.2.schema.json'...
[INFO] Schema 'schema/cyclonedx/1.2/bom-1.2.schema.json' loaded.
[INFO] Validating 'examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json'...
[INFO] BOM valid against JSON schema: 'true'You can also verify the exit code from the validate command:
echo $?0 // no error (valid)./sbom-utility validate -i test/cyclonedx/1.6/cdx-1-6-valid-cbom-full-1.6.json --force https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.6.schema.json[INFO] Attempting to load and unmarshal data from: 'test/cyclonedx/1.6/cdx-1-6-valid-cbom-full-1.6.json'...
[INFO] Successfully unmarshalled data from: 'test/cyclonedx/1.6/cdx-1-6-valid-cbom-full-1.6.json'
[INFO] Determining file's BOM format and version...
[INFO] Determined BOM format, version (variant): 'CycloneDX', '1.6' (latest)
[INFO] Matching BOM schema (for validation): schema/cyclonedx/1.6/bom-1.6.schema.json
[INFO] Loading schema from '--force' flag: 'https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.6.schema.json'...
[INFO] Validating document using forced schema (i.e., '--force https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.6.schema.json')
[INFO] Schema 'schema/cyclonedx/1.6/bom-1.6.schema.json' loaded.
[INFO] Validating 'test/cyclonedx/1.6/cdx-1-6-valid-cbom-full-1.6.json'...
[INFO] BOM valid against JSON schema: 'true'You can also verify the exit code from the validate command:
echo $?0 // no error (valid)The validation command will use the declared format and version found within the SBOM JSON file itself to lookup the default (latest) matching schema version (as declared inconfig.json; however, if variants of that same schema (same format and version) are declared, they can be requested via the --variant command line flag:
./sbom-utility validate -i test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json --variant customIf you run the sample command above, you would see several "custom" schema errors resulting in an invalid SBOM determination (i.e., exit status 2):
[INFO] Attempting to load and unmarshal data from: 'test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json'...
[INFO] Successfully unmarshalled data from: 'test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json'
[INFO] Determining file's BOM format and version...
[INFO] Determined BOM format, version (variant): 'CycloneDX', '1.4' custom
[INFO] Matching BOM schema (for validation): schema/test/bom-1.4-custom.schema.json
[INFO] Loading schema 'schema/test/bom-1.4-custom.schema.json'...
[INFO] Schema 'schema/test/bom-1.4-custom.schema.json' loaded.
[INFO] Validating 'test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json'...
[INFO] BOM valid against JSON schema: 'false'
[INFO] (3) schema errors detected.
[INFO] Formatting error results ('txt' format)...
1. {
"type": "contains",
"field": "metadata.properties",
"context": "(root).metadata.properties",
"description": "At least one of the items must match",
"value": [
{
"name": "urn:example.com:disclaimer",
"value": "This SBOM is current as of the date it was generated."
},
{
"name": "urn:example.com:classification",
"value": "This SBOM is Confidential Information. Do not distribute."
}
]
}
2. {
"type": "const",
"field": "metadata.properties.0.value",
"context": "(root).metadata.properties.0.value",
"description": "metadata.properties.0.value does not match: \"This SBOM is current as of the date it was generated and is subject to change.\"",
"value": "This SBOM is current as of the date it was generated."
}
3. {
"type": "number_all_of",
"field": "metadata.properties",
"context": "(root).metadata.properties",
"description": "Must validate all the schemas (allOf)",
"value": [
{
"name": "urn:example.com:disclaimer",
"value": "This SBOM is current as of the date it was generated."
},
{
"name": "urn:example.com:classification",
"value": "This SBOM is Confidential Information. Do not distribute."
}
]
}
[ERROR] invalid SBOM: schema errors found (test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json)
[INFO] document 'test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json': valid=[false]
confirming the exit code:
echo $?2 // SBOM errorThe output shows a first schema error indicating the failing JSON object; in this case,
- the CycloneDX
metadata.propertiesfield, which is a list ofpropertyobjects. - Found that a property with a
namefield with the value"urn:example.com:disclaimer"had an incorrectvalue.- the
valuefield SHOULD have had a constant value of"This SBOM is current as of the date it was generated and is subject to change."(as was required by the custom schema's regex). - However, it was found to have only a partial match of
"This SBOM is current as of the date it was generated.".
- the
Use the --debug or -d flag to see all schema error details:
./sbom-utility validate -i test/custom/cdx-1-4-test-custom-metadata-property-disclaimer-invalid.json --variant custom -dThe details include the full context of the failing metadata.properties object which also includes a "urn:example.com:classification" property:
3. {
"type": "number_all_of",
"field": "metadata.properties",
"context": "(root).metadata.properties",
"description": "Must validate all the schemas (allOf)",
"value": [
{
"name": "urn:example.com:disclaimer",
"value": "This SBOM is current as of the date it was generated."
},
{
"name": "urn:example.com:classification",
"value": "This SBOM is Confidential Information. Do not distribute."
}
]
}The JSON format will provide an array of schema error results that can be post-processed as part of validation toolchain.
./sbom-utility validate -i test/validation/cdx-1-4-validate-err-components-unique-items-1.json --format json -q[
{
"type": "unique",
"field": "components",
"context": "(root).components",
"description": "array items[1,2] must be unique",
"value": {
"type": "array",
"index": 1,
"item": {
"bom-ref": "pkg:npm/body-parser@1.19.0",
"description": "Node.js body parsing middleware",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
],
"licenses": [
{
"license": {
"id": "MIT"
}
}
],
"name": "body-parser",
"purl": "pkg:npm/body-parser@1.19.0",
"type": "library",
"version": "1.19.0"
}
}
},
{
"type": "unique",
"field": "components",
"context": "(root).components",
"description": "array items[2,4] must be unique",
"value": {
"type": "array",
"index": 2,
"item": {
"bom-ref": "pkg:npm/body-parser@1.19.0",
"description": "Node.js body parsing middleware",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
],
"licenses": [
{
"license": {
"id": "MIT"
}
}
],
"name": "body-parser",
"purl": "pkg:npm/body-parser@1.19.0",
"type": "library",
"version": "1.19.0"
}
}
}
]In many cases, BOMs may have many errors and having the value information details included can be too verbose and lead to large output files to inspect. In those cases, simply set the error-value flag to false.
Rerunning the same command with this flag set to false yields a reduced set of information.
./sbom-utility validate -i test/validation/cdx-1-4-validate-err-components-unique-items-1.json --format json --error-value=false -q[
{
"type": "unique",
"field": "components",
"context": "(root).components",
"description": "array items[1,2] must be unique"
},
{
"type": "unique",
"field": "components",
"context": "(root).components",
"description": "array items[2,4] must be unique"
}
]This command is able to "trim" one or more JSON keys (fields) from specified JSON BOM documents effectively "pruning" the JSON document. This functionality helps consumers of large-sized BOMs that need to analyze specific types of data in large BOMs in reducing the BOM data to just what is needed for their use cases or needs.
This command is used to output, using the --output-file flag, a "trimmed" BOM in JSON format.
json(default)
Trim operates on a JSON BOM input file (see --input-file flag) and produces a trimmed JSON BOM output file using the following flags:
A comma-separated list of JSON map keys. Similar to the query command's --select flag syntax.
A comma-separated list of JSON document paths using the same syntax as the query command's --from flag.
A flag that normalizes the BOM data after trimming and prior to output.
This flag invokes custom code that sorts all components, services, licenses, vulnerabilities, properties, external references, hashes and most other BOM data using custom comparators.
Each comparator uses required fields and other identifying fields to create "composite keys" for each unique data structure.
The original BOM used for these examples can be found here:
Validating the "juice shop" SBOM (CycloneDX 1.2) example provided in this repository.
./sbom-utility trim -i ./sbom-utility trim -i test/trim/trim-cdx-1-5-sample-small-components-only.sbom.json --keys=propertiesOriginal BOM with properties:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"serialNumber": "urn:uuid:1a2b3c4d-1234-abcd-9876-a3b4c5d6e7f9",
"components": [
{
"type": "library",
"bom-ref": "pkg:npm/sample@2.0.0",
"purl": "pkg:npm/sample@2.0.0",
"name": "sample",
"version": "2.0.0",
"description": "Node.js Sampler package",
"properties": [
{
"name": "foo",
"value": "bar"
}
]
},
{
"type": "library",
"bom-ref": "pkg:npm/body-parser@1.19.0",
"purl": "pkg:npm/body-parser@1.19.0",
"name": "body-parser",
"version": "1.19.0",
"description": "Node.js body parsing middleware",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
]
}
],
"properties": [
{
"name": "abc",
"value": "123"
}
]
}Output BOM results without properties:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"serialNumber": "urn:uuid:1a2b3c4d-1234-abcd-9876-a3b4c5d6e7f9",
"version": 1,
"components": [
{
"type": "library",
"bom-ref": "pkg:npm/sample@2.0.0",
"name": "sample",
"version": "2.0.0",
"description": "Node.js Sampler package",
"purl": "pkg:npm/sample@2.0.0"
},
{
"type": "library",
"bom-ref": "pkg:npm/body-parser@1.19.0",
"name": "body-parser",
"version": "1.19.0",
"description": "Node.js body parsing middleware",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
],
"purl": "pkg:npm/body-parser@1.19.0"
}
]
}./sbom-utility trim -i test/trim/trim-cdx-1-5-sample-small-components-only.sbom.json --keys=name,description -qOutput BOM results without name or description:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"serialNumber": "urn:uuid:1a2b3c4d-1234-abcd-9876-a3b4c5d6e7f9",
"version": 1,
"components": [
{
"type": "library",
"bom-ref": "pkg:npm/sample@2.0.0",
"version": "2.0.0",
"purl": "pkg:npm/sample@2.0.0",
"properties": [
{
"value": "bar"
}
]
},
{
"type": "library",
"bom-ref": "pkg:npm/body-parser@1.19.0",
"version": "1.19.0",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
],
"purl": "pkg:npm/body-parser@1.19.0"
}
],
"properties": [
{
"value": "123"
}
]
}./sbom-utility trim -i test/trim/trim-cdx-1-5-sample-small-components-only.sbom.json --keys=properties --from components -qOutput BOM results with properties removed from all components:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"serialNumber": "urn:uuid:1a2b3c4d-1234-abcd-9876-a3b4c5d6e7f9",
"version": 1,
"components": [
{
"type": "library",
"bom-ref": "pkg:npm/sample@2.0.0",
"name": "sample",
"version": "2.0.0",
"description": "Node.js Sampler package",
"purl": "pkg:npm/sample@2.0.0"
},
{
"type": "library",
"bom-ref": "pkg:npm/body-parser@1.19.0",
"name": "body-parser",
"version": "1.19.0",
"description": "Node.js body parsing middleware",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
],
"purl": "pkg:npm/body-parser@1.19.0"
}
],
"properties": [
{
"name": "abc",
"value": "123"
}
]
}./sbom-utility trim -i test/trim/trim-cdx-1-5-sample-components-normalize.sbom.json --keys="bom-ref" --normalize -qNote If you do not want to remove any keys and simply normalize output, set keys to an empty string: --keys="".
Use the trim command to remove all bom-ref fields and normalize output:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"components": [
{
"type": "library",
"bom-ref": "pkg:npm/sample@2.0.0",
"purl": "pkg:npm/sample@2.0.0",
"name": "sample",
"version": "2.0.0",
"licenses": [
{
"license": {
"id": "GPL-2.0-or-later"
}
},
{
"license": {
"id": "LGPL-2.0-or-later"
}
},
{
"license": {
"id": "GPL-2.0-only"
}
}
],
"properties": [
{
"name": "moo",
"value": "cow"
},
{
"name": "foo",
"value": "bar"
}
]
},
{
"type": "library",
"bom-ref": "pkg:npm/body-parser@1.19.0",
"purl": "pkg:npm/body-parser@1.19.0",
"name": "body-parser",
"version": "1.19.0",
"hashes": [
{
"alg": "SHA-256",
"content": "ba7816bf8f01cfea414140de5dae2223b00361a396177a9cb410ff61f20015ad"
},
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
}
],
"licenses": [
{
"license": {
"id": "MIT"
}
},
{
"license": {
"id": "Apache-2.0"
}
}
],
"externalReferences": [
{
"type": "website",
"url": "https://example.com/website"
},
{
"type": "support",
"url": "https://example.com/support"
}
]
}
]
}Trimmed, normalized output:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"components": [
{
"type": "library",
"name": "body-parser",
"version": "1.19.0",
"hashes": [
{
"alg": "SHA-1",
"content": "96b2709e57c9c4e09a6fd66a8fd979844f69f08a"
},
{
"alg": "SHA-256",
"content": "ba7816bf8f01cfea414140de5dae2223b00361a396177a9cb410ff61f20015ad"
}
],
"licenses": [
{
"license": {
"id": "Apache-2.0"
}
},
{
"license": {
"id": "MIT"
}
}
],
"purl": "pkg:npm/body-parser@1.19.0",
"externalReferences": [
{
"type": "support",
"url": "https://example.com/support"
},
{
"type": "website",
"url": "https://example.com/website"
}
]
},
{
"type": "library",
"name": "sample",
"version": "2.0.0",
"licenses": [
{
"license": {
"id": "GPL-2.0-only"
}
},
{
"license": {
"id": "GPL-2.0-or-later"
}
},
{
"license": {
"id": "LGPL-2.0-or-later"
}
}
],
"purl": "pkg:npm/sample@2.0.0",
"properties": [
{
"name": "foo",
"value": "bar"
},
{
"name": "moo",
"value": "cow"
}
]
}
]
}This experimental command is able to "patch" an existing JSON BOM document using an IETF RFC6902 "JavaScript Object Notation (JSON) Patch" file.
The current implementation supports the following "patch" operations:
- "add", "update", "remove" and "test"
At this time the "move" or "copy" operations are not supported.
Patches work for both simple (i.e., integer, float, boolean and string) values as well as complex values such as JSON objects, maps and arrays.
This command is used to output, using the --output-file flag, a "patched" BOM in JSON format.
json(default)
The patch command operates on a JSON BOM input file (see --input-file flag) as well as an IETF RFC6902-formatted "patch' file and produces a "patched" version of the input JSON BOM as output using the following flags:
The --patch-file <filename> flag is used to provide the relative path to the IETF RFC6902 patch file to applied to the BOM input file.
A flag that normalizes the BOM data after patching and prior to output.
This flag invokes custom code that sorts all components, services, licenses, vulnerabilities, properties, external references, hashes and most other BOM data using custom comparators.
Each comparator uses required fields and other identifying fields to create "composite keys" for each unique data structure.
This section contains examples of all supported patch operations (i.e., add, replace, test) including values that are primitives (i.e., numbers, strings) as well as JSON objects and may be indexed JSON array elements.
- Example 1: "add" BOM
serialNumber - Example 2: "add" (update) BOM
version - Example 3: "add"
supplierobject tometadata - Example 4:"add"
propertyobjects tometadata.propertiesarray - Example 5: "replace"
versionandtimestampvalues - Example 6: "remove"
propertyfrom themetadata.propertiesarray - Example 7: "test" if a
propertyexists in themetadata.propertiesarray
This example adds a new top-level key "serialNumber" and corresponding value to a CycloneDX JSON BOM file.
The original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json has no serial number:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
...
}
}IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-add-serial-number.json:
[
{ "op": "add", "path": "/serialNumber", "value": "urn:uuid:1a2b3c4d-1234-abcd-9876-a3b4c5d6e7f9" }
]Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-add-serial-number.json -qPatched JSON BOM output file:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"serialNumber": "urn:uuid:1a2b3c4d-1234-abcd-9876-a3b4c5d6e7f9",
"version": 1,
"metadata": {
...
}
}This example shows how the patch's "add" operation can be used to update existing values which is the specified behavior of RFC6902.
Original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json with version equal to 1:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
...
}
}IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-add-serial-number.json:
[
{ "op": "add", "path": "/version", "value": 2 }
]Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-add-update-version.json -qThe patched, output JSON BOM file which has the changed version value of 2:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 2,
"metadata": {
...
}
}This example shows how the patch's "add" operation can be used to add a JSON object to an existing object.
Original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
...
]
}
}Apply the following IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-add-metadata-supplier.json:
[
{ "op": "add", "path": "/metadata/supplier", "value": {
"name": "Example Co. Distribution Dept.",
"url": [
"https://example.com/software/"
]
}
}
]Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-add-metadata-supplier.json -qThe patched BOM has the supplier object added to the metadata:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"supplier": {
"name": "Example Co. Distribution Dept.",
"url": [
"https://example.com/software/"
]
},
"properties": [
...
]
}
}This example shows how the patch's "add" operation can be used to add property objects to an existing properties array.
Original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
{
"name": "Property 1",
"value": "Value 1"
},
{
"name": "Property 2",
"value": "Value 2"
}
]
}
}Apply the following IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-add-metadata-properties.json:
[
{ "op": "add", "path": "/metadata/properties/-", "value": { "name": "foo", "value": "bar" } },
{ "op": "add", "path": "/metadata/properties/1", "value": { "name": "rush", "value": "yyz" } }
]Note that the first patch record uses the - (dash) to indicate "insert at end" whereas the second patch record has the zero-based array index 1.
Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-add-metadata-properties.json -qThe patched, output BOM has the two new properties at the specified indices:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
{
"name": "Property 1",
"value": "Value 1"
},
{
"name": "rush",
"value": "yyz"
},
{
"name": "Property 2",
"value": "Value 2"
},
{
"name": "foo",
"value": "bar"
}
]
}
}This variant of the previous example also normalizes the output BOM arrays; in this case, normalizing the existing and added properties of the metadata.properties array.
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-add-metadata-properties.json --normalize -qThe patched and normalized metadata.properties appear as follows:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
{
"name": "Property 1",
"value": "Value 1"
},
{
"name": "Property 2",
"value": "Value 2"
},
{
"name": "foo",
"value": "bar"
},
{
"name": "rush",
"value": "yyz"
}
]
}
}This example shows how the patch's "replace" operation can be used to update the BOM document's version and timestamp values.
Original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
...
]
}
}Apply the following IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-replace-version-timestamp.json:
[
{ "op": "replace", "path": "/version", "value": 2 },
{ "op": "replace", "path": "/metadata/timestamp", "value": "2024-01-24T22:50:18+00:00" }
]Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-replace-version-timestamp.json -qThe patched, output BOM has both an updated version and timestamp:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 2,
"metadata": {
"timestamp": "2024-01-24T22:50:18+00:00",
"properties": [
...
}
}This example shows how the patch's "remove" operation can be used to remove a property object from the metadata.properties array using an index.
Original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
{
"name": "Property 1",
"value": "Value 1"
},
{
"name": "Property 2",
"value": "Value 2"
}
]
}
}Apply the following IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-remove-metadata-property.json:
[
{ "op": "remove", "path": "/metadata/properties/1" }
]Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-remove-metadata-property.json -qThe property at index 1 of the metadata.properties array has been removed:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
{
"name": "Property 1",
"value": "Value 1"
}
]
}
}This example shows how the patch records's can "test" for values or objects in a BOM. The utility will confirm "success" (using an [INFO] log message); otherwise, the utility will exit and return an error and generate an [ERROR] log message.
Original CycloneDX JSON BOM file: test/patch/cdx-1-5-simplest-base.json:
{
"bomFormat": "CycloneDX",
"specVersion": "1.5",
"version": 1,
"metadata": {
"timestamp": "2023-10-12T19:07:00Z",
"properties": [
{
"name": "Property 1",
"value": "Value 1"
},
{
"name": "Property 2",
"value": "Value 2"
}
]
}
}Apply the following IETF RFC6902 JSON Patch file: test/patch/cdx-patch-example-test-metadata-property.json:
[
{ "op": "test", "path": "/metadata/properties/1", "value":
{
"name": "Property 2",
"value": "Value 2"
}
}
]Invoke the patch command as follows:
./sbom-utility patch --input-file test/patch/cdx-1-5-simplest-base.json --patch-file test/patch/cdx-patch-example-test-metadata-property.json -qAn informational (i.e., [INFO]) message is logged with success since the property object was found in the input BOM:
[INFO] IETF RFC6902 test operation success. test record: {
"op": "test",
"path": "/metadata/properties/1",
"value": {
"name": "Property 2",
"value": "Value 2"
}
}If instead, we tested for a different property object:
[
{ "op": "test", "path": "/metadata/properties/1", "value":
{
"name": "Property 3",
"value": "Value 3"
}
}
]an error (i.e., [ERROR]) would be returned from the utility:
[ERROR] IETF RFC6902 test operation error. test record: {
"op": "test",
"path": "/metadata/properties/1",
"value": {
"name": "Property 3",
"value": "Value 3"
}
}This command allows you to perform SQL-like queries into JSON format SBOMs. Currently, the command recognizes the --select and --from as well as the --where filter.
The --from clause value is applied to the JSON document object model and can return either a singleton JSON object or an array of JSON objects as a result. This is determined by the last property value's type as declared in the schema.
The --select clause is then applied to the --from result set to only return the specified properties (names and their values).
If the result set is an array, the array entries can be reduced by applying the --where filter to ony return those entries whose specified field names match the supplied regular expression (regex).
Note: All query command results are returned as valid JSON documents. This includes a null value for empty result sets.
The query command only supports JSON output.
json(default)
The query command does not support formatting of output results as JSON format is always returned.
This example effectively extracts the first-order package manifest from the SBOM.
In this example, only the --from clause is needed to select an object. The --select clause is omitted which is equivalent to using the "select all" wildcard character * which returns all fields and values from the component object.
./sbom-utility query -i test/cyclonedx/cdx-1-4-mature-example-1.json --from metadata.componentis equivalent to using the wildcard character (which may need to be enclosed in single or double quotes depending on your shell):
./sbom-utility query -i test/cyclonedx/cdx-1-4-mature-example-1.json --select '*' --from metadata.component -q{
"name": "Example Application v10.0.4",
"bom-ref": "pkg:oci/example.com/product/application@10.0.4.0",
"description": "Example's Do-It-All application",
"externalReferences": [
{
"type": "website",
"url": "https://example.com/application"
}
],
"hashes": [
{
"alg": "SHA-1",
"content": "1111aaaa2222cccc3333dddd4444eeee5555ffff"
}
],
"licenses": [
{
"license": {
"id": "Apache-2.0"
}
}
],
...In this example, the --from clause references the top-level metadata.supplier object.
./sbom-utility query -i test/cyclonedx/cdx-1-4-mature-example-1.json --from metadata.supplier -q{
"contact": [
{
"email": "distribution@example.com"
}
],
"name": "Example Co. Distribution Dept.",
"url": [
"https://example.com/software/"
]
}In this example, the --from clause references the singleton JSON object component found under the top-level metadata object. It then reduces the resultant JSON object to only return the name and value fields and their values as requested on the --select clause.
./sbom-utility query --select name,version --from metadata.component -i examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json --indent 2 -qThe result, which also uses the --indent 2 flag:
{
"name": "juice-shop",
"version": "11.1.2"
}In this example, the --from filter will return the entire JSON components array.
./sbom-utility query -i test/cyclonedx/cdx-1-4-mature-example-1.json --from components -q[
{
"bom-ref": "pkg:npm/sample@2.0.0",
"description": "Node.js Sampler package",
"licenses": [
{
"license": {
"id": "MIT"
}
}
],
"name": "sample",
"purl": "pkg:npm/sample@2.0.0",
"type": "library",
"version": "2.0.0"
},
{
"bom-ref": "pkg:npm/body-parser@1.19.0",
"description": "Node.js body parsing middleware",
"hashes": [
{
...
}
],
"licenses": [
{
"license": {
"id": "MIT"
}
}
],
"name": "body-parser",
"purl": "pkg:npm/body-parser@1.19.0",
"type": "library",
"version": "1.19.0"
}
]Note: The command for this example only used the --from flag and did not need to supply --select '*' as this is the default.
In this example, the --where filter will be applied to a set of properties results to only include entries that match the specified regex.
./sbom-utility query -i test/cyclonedx/cdx-1-4-mature-example-1.json --from metadata.properties --where name=urn:example.com:classification -q[
{
"name": "urn:example.com:classification",
"value": "This SBOM is Confidential Information. Do not distribute."
}
]additionally, you can apply a --select clause to simply obtain the matching entry's value:
./sbom-utility query -i test/cyclonedx/cdx-1-4-mature-example-1.json --select value --from metadata.properties --where name=urn:example.com:classification -q[
{
"value": "This SBOM is Confidential Information. Do not distribute."
}
]Primarily, this command is used to extract, filter and list CycloneDX BOM component data using component list.
This command supports the --format flag with any of the following values:
txt(default),csv,md
Use the --summary flag on the component list command to produce a summary report with reduced column information.
This example shows the component list with all column information display. Since CycloneDX component data can be very extensive, many columns simply indicate the component has more data available which can be extracted using the query command if needed.
./sbom-utility component list -i test/cyclonedx/1.6/specification/valid-bom-1.6.json -qbom-ref group type name version description copyright supplier-name supplier-url manufacturer-name manufacturer-url publisher purl swid-tag-id cpe mime-type scope number-hashes number-licenses has-pedigree has-evidence has-components has-release-notes has-model-card has-data has-tags has-signature
------- ----- ---- ---- ------- ----------- --------- ------------- ------------ ----------------- ---------------- --------- ---- ----------- --- --------- ----- ------------- --------------- ------------ ------------ -------------- ----------------- -------------- -------- -------- -------------
application Acme Application 9.1.1 swidgen-242eb18a-503e-ca37-393b-cf156ef09691_9.1.1 0 0 false false false false false false false false
pkg:npm/acme/component@1.0.0 com.acme library tomcat-catalina 9.0.14 pkg:npm/acme/component@1.0.0 4 1 true false false false false false false false
org.example library mylibrary 1.0.0 Example, Inc. https://example.com Example-2, Inc. https://example.org required 0 0 true false false false false false false false
The same BOM component information as in the previous example; however, using the summary flag to reduce the number of columns data.
./sbom-utility component list -i test/cyclonedx/1.6/specification/valid-bom-1.6.json --summary -qbom-ref group type name version description copyright supplier-name supplier-url manufacturer-name manufacturer-url publisher purl swid-tag-id cpe number-hashes number-licenses
------- ----- ---- ---- ------- ----------- --------- ------------- ------------ ----------------- ---------------- --------- ---- ----------- --- ------------- ---------------
application Acme Application 9.1.1 swidgen-242eb18a-503e-ca37-393b-cf156ef09691_9.1.1 0 0
pkg:npm/acme/component@1.0.0 com.acme library tomcat-catalina 9.0.14 pkg:npm/acme/component@1.0.0 4 1
org.example library mylibrary 1.0.0 Example, Inc. https://example.com Example-2, Inc. https://example.org 0 0
This command is used to aggregate and summarize software, hardware and data license information included in the SBOM. It also displays license usage policies for resources based upon concluded by SPDX license identifier, license family or logical license expressions as defined in he current policy file (i.e., license.json).
The license command supports the following subcommands:
- list - list or create a summarized report of licenses found in input SBOM.
- list with --summary flag - As full license information can be very large, a summary view is often most useful.
- policy - list user configured license policies by SPDX license ID, family name and other filters.
The list subcommand produces JSON output which contains an array of CycloneDX LicenseChoice data objects found in the BOM input file without component association. LicenseChoice data, in general, may provide license information using registered SPDX IDs, license expressions (of SPDX IDs) or license names (not necessarily registered by SPDX). License data may also include base64-encoded license or legal text that was used to determine a license's SPDX ID or name.
This command supports the --format flag with any of the following values:
json(default),csv,md- using the
--summaryflag:txt(default),csv,md
- using the
- Results are not sorted for base
license listsubcommand.- using the
--summaryflag: results are sorted (ascending) by license key which can be one of licenseid(SPDX ID),nameorexpression.
- using the
Use the --summary flag on the license list command to produce a summary report in txt (default) format as well as policy determination based upon the license.json declarations.
This example shows a few entries of the JSON output that exhibit the three types of license data described above:
./sbom-utility license list -i examples/cyclonedx/SBOM/juice-shop-11.1.2/bom.json --format json -q[
{
"license": {
"$comment": "by license `id",
"id": "MIT",
"name": "",
"url": ""
}
},
{
"license": {
"$comment": "by license `expression",
"id": "",
"name": "",
"url": ""
},
"expression": "Apache-2.0 AND (MIT OR GPL-2.0-only)"
},
{
"license": {
"$comment": "by license `name` with full license encoding",
"id": "",
"name": "Apache 2",
"text": {
"contentType": "text/plain",
"encoding": "base64",
"content": "CiAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgIEFwYWNoZSBMaWNlbnNlCiAgICAgICAgICAgICAgICAgICAgICAgICAgIFZlcnNpb24 ..."
},
"url": "https://www.apache.org/licenses/LICENSE-2.0.txt"
}
},
...
]This example shows the default text output from using the summary flag:
./sbom-utility license list -i test/cyclonedx/cdx-1-3-license-list.json --summary -qusage-policy license-type license resource-name bom-ref bom-location
------------ ------------ ------- ------------- ------- ------------
needs-review id ADSL Foo service:example.com/myservices/foo services
needs-review name AGPL Library J pkg:lib/libraryJ@1.0.0 components
allow name Apache Library B pkg:lib/libraryB@1.0.0 components
allow id Apache-1.0 Library E pkg:lib/libraryE@1.0.0 components
allow id Apache-2.0 N/A N/A metadata.licenses
allow id Apache-2.0 Library A pkg:lib/libraryA@1.0.0 components
allow id Apache-2.0 Library F pkg:lib/libraryF@1.0.0 components
allow expression Apache-2.0 AND (MIT OR BSD-2-Clause) Library B pkg:lib/libraryB@1.0.0 components
allow name BSD Library J pkg:lib/libraryJ@1.0.0 components
deny name CC-BY-NC Library G pkg:lib/libraryG@1.0.0 components
needs-review name GPL Library H pkg:lib/libraryH@1.0.0 components
needs-review id GPL-2.0-only Library C pkg:lib/libraryC@1.0.0 components
needs-review id GPL-3.0-only Library D pkg:lib/libraryD@1.0.0 components
allow id MIT ACME Application pkg:app/sample@1.0.0 metadata.component
allow id MIT Library A pkg:lib/libraryA@1.0.0 components
UNDEFINED invalid NOASSERTION Library NoLicense pkg:lib/libraryNoLicense@1.0.0 components
UNDEFINED invalid NOASSERTION Bar service:example.com/myservices/bar services
needs-review name UFL ACME Application pkg:app/sample@1.0.0 metadata.component- Notes
- Usage policy column values are derived from the
license.jsonpolicy configuration file.- A
usage policyvalue ofUNDEFINEDindicates thatlicense.jsonprovided no entry that matched the declared license (idorname) in the SBOM.
- A
- License expressions (e.g.,
(MIT or GPL-2.0)) with one term resolving toUNDEFINEDand the the other term having a concrete policy will resolve to the "optimistic" policy forORexpressions and the "pessimistic" policy forANDexpressions. In addition, a warning of this resolution is emitted.
- Usage policy column values are derived from the
The list command results can be filtered using the --where flag using the column names in the report. These include usage-policy, license-type, license, resource-name, bom-ref and bom-location.
The following example shows filtering of component licenses using the license-type column where the license was described as a name value:
./sbom-utility license list -i test/cyclonedx/cdx-1-3-license-list.json --summary --where license-type=name -qusage-policy license-type license resource-name bom-ref bom-location
------------ ------------ ------- ------------- ------- ------------
needs-review name AGPL Library J pkg:lib/libraryJ@1.0.0 components
allow name Apache Library B pkg:lib/libraryB@1.0.0 components
allow name BSD Library J pkg:lib/libraryJ@1.0.0 components
deny name CC-BY-NC Library G pkg:lib/libraryG@1.0.0 components
needs-review name GPL Library H pkg:lib/libraryH@1.0.0 components
needs-review name UFL ACME Application pkg:app/sample@1.0.0 metadata.componentIn another example, the list is filtered by the usage-policy where the value is needs-review:
./sbom-utility license list -i test/cyclonedx/cdx-1-3-license-list.json --summary --where usage-policy=needs-review -qusage-policy license-type license resource-name bom-ref bom-location
------------ ------------ ------- ------------- ------- ------------
needs-review id ADSL Foo service:example.com/myservices/foo services
needs-review name AGPL Library J pkg:lib/libraryJ@1.0.0 components
needs-review name GPL Library H pkg:lib/libraryH@1.0.0 components
needs-review id GPL-2.0-only Library C pkg:lib/libraryC@1.0.0 components
needs-review id GPL-3.0-only Library D pkg:lib/libraryD@1.0.0 components
needs-review name UFL ACME Application pkg:app/sample@1.0.0 metadata.componentTo view a report listing the contents of the current policy file (i.e., license.json) which contains an encoding of known software and data licenses by SPDX ID and license family along with a configurable usage policy (i.e., "allow", "deny" or "needs-review").
This command supports the --format flag with any of the following values:
txt(default),csv,md
- Results are sorted by license policy
family.
Use the --summary flag on the license policy list command to produce a summary report with a reduced set of column data (i.e., it includes only the following columns: usage-policy, family, id, name, oci (approved) fsf (approved), deprecated, and SPDX reference URL).
Use the --wrap flag to toggle the wrapping of text within columns of the license policy report (txt format only) output using the values true or false. The default value is false.
./sbom-utility license policy -qusage-policy family id name osi fsf deprecated reference aliases annotations notes
------------ ------ -- ---- --- --- ---------- --------- ------- ----------- -----
allow 0BSD 0BSD BSD Zero Clause License true false false https://spdx.org/licenses/0BSD.html Free Public License 1.0.0 APPROVED none
needs-review ADSL ADSL Amazon Digital Services License false false false https://spdx.org/licenses/ADSL.html none NEEDS-APPROVAL none
allow AFL AFL-3.0 Academic Free License v3.0 true true false https://spdx.org/licenses/AFL-3.0.html none APPROVED none
needs-review AGPL AGPL-1.0 Affero General Public License v1.0 false false true https://spdx.org/licenses/AGPL-1.0.html none NEEDS-APPROVAL,AGPL-WARNING none
allow Adobe Adobe-2006 Adobe Systems Incorporated CLA false false false https://spdx.org/licenses/Adobe-2006.html none APPROVED none
allow Apache Apache-2.0 Apache License 2.0 true true false https://spdx.org/licenses/Apache-2.0.html Apache License, Version 2.0 APPROVED none
allow Artistic Artistic-1.0 Artistic License 1.0 true false false https://spdx.org/licenses/Artistic-1.0.html none APPROVED none
...We can also apply the --summary flag to get a reduced set of columns that includes only the usage-policy along with the essential SPDX license information (e.g., no annotations or notes).
./sbom-utility license policy --summary -qusage-policy family id name osi fsf deprecated reference
------------ ------ -- ---- --- --- ---------- ---------
allow 0BSD 0BSD BSD Zero Clause License true false false https://spdx.org/licenses/0BSD.html
needs-review ADSL ADSL Amazon Digital Services License false false false https://spdx.org/licenses/ADSL.html
allow AFL AFL-3.0 Academic Free License v3.0 true true false https://spdx.org/licenses/AFL-3.0.html
needs-review AGPL AGPL-1.0 Affero General Public License v1.0 false false true https://spdx.org/licenses/AGPL-1.0.html
allow Adobe Adobe-2006 Adobe Systems Incorporated CLA false false false https://spdx.org/licenses/Adobe-2006.html
allow Apache Apache-2.0 Apache License 2.0 true true false https://spdx.org/licenses/Apache-2.0.html
allow Artistic Artistic-1.0 Artistic License 1.0 true true false https://spdx.org/licenses/Artistic-2.0.html
...The following example shows filtering of license policies using the id column:
./sbom-utility license policy --where id=Apache -qusage-policy family id name osi fsf deprecated reference aliases annotations notes
------------ ------ -- ---- --- --- ---------- --------- ------- ----------- -----
allow Apache Apache-1.0 Apache v1.0 false true false https://spdx.org/licenses/Apache-1.0.html none APPROVED none
allow Apache Apache-1.1 Apache v1.1 true true false https://spdx.org/licenses/Apache-1.1.html none APPROVED Superseded by Apache-2.0
allow Apache Apache-2.0 Apache License 2.0 true true false https://spdx.org/licenses/Apache-2.0.html Apache License APPROVED none
./sbom-utility license policy --wrap=true -qusage-policy family id name osi fsf deprecated reference aliases annotations notes
------------ ------ -- ---- --- --- ---------- --------- ------- ----------- -----
allow 0BSD 0BSD BSD Zero Clause Lice (20/23) true false false https://spdx.org/licenses/0BSD.html Free Public License 1.0. (24/25) APPROVED none
needs-review ADSL ADSL Amazon Digital Servi (20/31) false false false https://spdx.org/licenses/ADSL.html NEEDS-APPROVAL none
allow AFL AFL-3.0 Academic Free Licens (20/26) true true false https://spdx.org/licenses/AFL-3.0.ht (36/38) APPROVED none
needs-review AGPL AGPL-1.0 Affero General Publi (20/34) false false true https://spdx.org/licenses/AGPL-1.0.h (36/39) NEEDS-APPROVAL none
AGPL-WARNING
needs-review APSL APSL-2.0 Apple Public Source (20/31) true true false https://spdx.org/licenses/APSL-2.0.h (36/39) NEEDS-APPROVAL none
allow Adobe Adobe-2006 Adobe Systems Incorp (20/56) false false false https://spdx.org/licenses/Adobe-2006 (36/41) APPROVED none
allow Apache Apache-2.0 Apache License 2.0 true true false https://spdx.org/licenses/Apache-2.0 (36/41) Apache License, Version (24/27) APPROVED none
allow Artistic Artistic-2.0 Artistic License 2.0 true true false https://spdx.org/licenses/Artistic-2 (36/43) APPROVED none
...- Currently, the default
license.jsonfile, used to derive theusage-policydata, does not contain entries for the entire set of SPDX 3.2 license templates.- An issue 12 is open to add parity.
- Annotations (tags) and notes can be defined within the
license.jsonfile and one or more assigned each license entry.
- For backwards compatibility, the
--wherefilter supports the keyspdx-idas an alias forid.
The resource command is geared toward inspecting various resources types and their information from SBOMs against future maturity models being developed as part of the OWASP Software Component Verification Standard (SCVS). In the SCVS model, a "resource" is the parent classification for software (components), services, Machine Learning (ML) models, data, hardware, tools and more.
Primarily, the command is used to generate lists of resources, by type, that are included in a CycloneDX SBOM by invoking resource list.
This command supports the --format flag with any of the following values:
txt(default),csv,md
Currently, all resource list command results are sorted by resource type then by resource name (required field).
./sbom-utility resource list -i test/cyclonedx/cdx-1-3-resource-list.json -qbom-ref resource-type group name version description
------- ------------- ----- ---- ------- -----------
pkg:app/sample@1.0.0 component ACME Application 2.0.0 ACME sample application
pkg:lib/libraryA@1.0.0 component Library A 1.0.0 Library A description
pkg:lib/libraryC@1.0.0 component Library C 1.0.0 Library C description.
pkg:lib/libraryF@1.0.0 component Library F 1.0.0 Library F description.
pkg:lib/libraryG@1.0.0 component Library G 1.0.0 Library G description.
pkg:lib/libraryH@1.0.0 component Library H 1.0.0 Library H description.
pkg:lib/libraryNoLicense@1.0.0 component Library NoLicense 1.0.0 Library "NoLicense" description.
pkg:lib/libraryB@1.0.0 component blue Library B 1.0.0 Library B description.
pkg:lib/libraryE@1.0.0 component blue Library E 1.0.0 Library E description.
pkg:lib/libraryD@1.0.0 component green Library D 1.0.0 Library D description.
pkg:lib/libraryJ@1.0.0 component green Library J 1.0.0 Library J description.
service:example.com/myservices/bar service Bar Bar service
service:example.com/myservices/foo service Foo Foo serviceThis example uses the type flag to specific service. The other valid type is component. Future versions of CycloneDX schema will include more resource types such as "ml" (machine learning) or "tool".
./sbom-utility resource list -i test/cyclonedx/cdx-1-3-resource-list.json --type service -qresource-type group name version description bom-ref
------------- ----- ---- ------- ----------- -------
service Bar Bar service service:example.com/myservices/bar
service Foo Foo service service:example.com/myservices/fooNote The results would be equivalent to using the --where filter:
./sbom-utility resource list -i test/cyclonedx/cdx-1-3-resource-list.json --where "resource-type=service" -qThis example uses the where filter on the name field. In this case we supply an exact "startswith" regex. for the name filter.
./sbom-utility resource list -i test/cyclonedx/cdx-1-3-resource-list.json --where "name=Library A" -qresource-type group name version description bom-ref
------------- ----- ---- ------- ----------- -------
component Library A 1.0.0 Library A description pkg:lib/libraryA@1.0.0You can verify which formats, schemas, versions and variants are available for validation by using the schema command.
- Note: The
schemacommand will default to thelistsubcommand if omitted.
This command supports the --format flag with any of the following values:
txt(default),csv,md
- Formatted results are sorted by
format(ascending),version(descending) andschema(descending)
./sbom-utility schema list -qname variant format version file url
---- ------- ------ ------- ---- ---
CycloneDX v1.6 (latest) CycloneDX 1.6 schema/cyclonedx/1.6/bom-1.6.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.6.schema.json
CycloneDX v1.5 (latest) CycloneDX 1.5 schema/cyclonedx/1.5/bom-1.5.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.5.schema.json
CycloneDX v1.4 (latest) CycloneDX 1.4 schema/cyclonedx/1.4/bom-1.4.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.4.schema.json
CycloneDX v1.4 custom CycloneDX 1.4 schema/test/bom-1.4-custom.schema.json
CycloneDX v1.3 (latest) CycloneDX 1.3 schema/cyclonedx/1.3/bom-1.3.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.3.schema.json
CycloneDX v1.3 custom CycloneDX 1.3 schema/test/bom-1.3-custom.schema.json
CycloneDX v1.3 strict CycloneDX 1.3 schema/cyclonedx/1.3/bom-1.3-strict.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.3-strict.schema.json
CycloneDX v1.2 (latest) CycloneDX 1.2 schema/cyclonedx/1.2/bom-1.2.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.2.schema.json
CycloneDX v1.2 strict CycloneDX 1.2 schema/cyclonedx/1.2/bom-1.2-strict.schema.json https://raw.githubusercontent.com/CycloneDX/specification/master/schema/bom-1.2-strict.schema.json
SPDX v2.3 (latest) SPDX SPDX-2.3 schema/spdx/2.3/spdx-schema.json https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3/schemas/spdx-schema.json
SPDX v2.3.1 development SPDX SPDX-2.3 schema/spdx/2.3.1/spdx-schema.json https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3.1/schemas/spdx-schema.json
SPDX v2.2.2 (latest) SPDX SPDX-2.2 schema/spdx/2.2.2/spdx-schema.json https://raw.githubusercontent.com/spdx/spdx-spec/v2.2.2/schemas/spdx-schema.json
SPDX v2.2.1 2.2.1 SPDX SPDX-2.2 schema/spdx/2.2.1/spdx-schema.json https://raw.githubusercontent.com/spdx/spdx-spec/v2.2.1/schemas/spdx-schema.jsonEntries for new or "custom" schemas can be added to the config.json file by adding a new schema entry and then will need to pass that file on the command line using the --config-schema flag.
These new schema entries will tell the schema loader where to find the JSON schema file locally, relative to the utility's executable.
For details see the "Adding new SBOM formats, schema versions and variants" section.
If you wish to have the new schema embedded in the executable, simply add it to the project's resources subdirectory following the format and version-based directory structure.
This command will extract basic vulnerability report data from an SBOM that has a "vulnerabilities" list or from a standalone VEX in CycloneDX format. It includes the ability to filter reports data by applying regex to any of the named column data.
Use the --format flag on the to choose one of the supported output formats:
- txt (default), csv, md
txt,csvandmdformatted results are sorted by vulnerabilityid(descending) then bycreateddate (descending).jsonresults are not sorted
The list subcommand provides a complete view of most top-level, vulnerability fields.
./sbom-utility vulnerability list -i test/vex/cdx-1-3-example1-bom-vex.json -qid bom-ref cwe-ids cvss-severity source-name source-url published updated created rejected analysis-state analysis-justification description
-- ------- ------- ------------- ----------- ---------- --------- ------- ------- -------- -------------- ---------------------- -----------
CVE-2023-42004 502 CVSSv31: 7.5 (high) NVD https://nvd.nist.gov/vuln/detail/CVE-2023-42004 2023-10-02 2023-10-02 2023-10-02 UNDEFINED UNDEFINED In FasterXML jackson-databind before 2.13.4, resource exhaustion can occur because of a lack of a check in BeanDeserializer._deserializeFromArray to prevent use of deeply nested arrays. An application is vulnerable only with certain customized choices for deserialization.
CVE-2023-42003 502 CVSSv31: 7.5 (high) NVD https://nvd.nist.gov/vuln/detail/CVE-2023-42003 2023-10-02 2023-10-02 2023-10-02 UNDEFINED UNDEFINED In FasterXML jackson-databind before 2.14.0-rc1, resource exhaustion can occur because of a lack of a check in primitive value deserializers to avoid deep wrapper array nesting, when the UNWRAP_SINGLE_VALUE_ARRAYS feature is enabled. Additional fix version in 2.13.4.1 and 2.12.17.1
CVE-2020-25649 611 CVSSv31: 7.5 (high), CVSSv31: 8.2 (high), CVSSv31: 0 (none) NVD https://nvd.nist.gov/vuln/detail/CVE-2020-25649 2020-12-03 2023-02-02 2020-12-03 not_affected code_not_reachable com.fasterxml.jackson.core:jackson-databind is a library which contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. Affected versions of this package are vulnerable to XML External Entity (XXE) Injection. A flaw was found in FasterXML Jackson Databind, where it does not have entity expansion secured properly in the DOMDeserializer class. The highest threat from this vulnerability is data integrity.This example shows the default text output from using the --summary flag:
./sbom-utility vulnerability list -i test/vex/cdx-1-3-example1-bom-vex.json --summary -qid cvss-severity source-name published description
-- ------------- ----------- --------- -----------
CVE-2023-42004 CVSSv31: 7.5 (high) NVD 2023-10-02 In FasterXML jackson-databind before 2.13.4, resource exhaustion can occur because of a lack of a check in BeanDeserializer._deserializeFromArray to prevent use of deeply nested arrays. An application is vulnerable only with certain customized choices for deserialization.
CVE-2023-42003 CVSSv31: 7.5 (high) NVD 2023-10-02 In FasterXML jackson-databind before 2.14.0-rc1, resource exhaustion can occur because of a lack of a check in primitive value deserializers to avoid deep wrapper array nesting, when the UNWRAP_SINGLE_VALUE_ARRAYS feature is enabled. Additional fix version in 2.13.4.1 and 2.12.17.1
CVE-2020-25649 CVSSv31: 7.5 (high) NVD 2020-12-03 com.fasterxml.jackson.core:jackson-databind is a library which contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. Affected versions of this package are vulnerable to XML External Entity (XXE) Injection. A flaw was found in FasterXML Jackson Databind, where it does not have entity expansion secured properly in the DOMDeserializer class. The highest threat from this vulnerability is data integrity../sbom-utility vulnerability list -i test/vex/cdx-1-3-example1-bom-vex.json --where description=XXE -qid bom-ref cwe-ids cvss-severity source-name source-url published updated created rejected analysis-state analysis-justification description
-- ------- ------- ------------- ----------- ---------- --------- ------- ------- -------- -------------- ---------------------- -----------
CVE-2020-25649 611 CVSSv31: 7.5 (high), CVSSv31: 8.2 (high), CVSSv31: 0 (none) NVD https://nvd.nist.gov/vuln/detail/CVE-2020-25649 2020-12-03 2023-02-02 2020-12-03 not_affected code_not_reachable com.fasterxml.jackson.core:jackson-databind is a library which contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. Affected versions of this package are vulnerable to XML External Entity (XXE) Injection. A flaw was found in FasterXML Jackson Databind, where it does not have entity expansion secured properly in the DOMDeserializer class. The highest threat from this vulnerability is data integrity../sbom-utility vulnerability list -i test/vex/cdx-1-3-example1-bom-vex.json --where analysis-state=not_affected -qid bom-ref cwe-ids cvss-severity source-name source-url published updated created rejected analysis-state analysis-justification description
-- ------- ------- ------------- ----------- ---------- --------- ------- ------- -------- -------------- ---------------------- -----------
CVE-2020-25649 611 CVSSv31: 7.5 (high), CVSSv31: 8.2 (high), CVSSv31: 0 (none) NVD https://nvd.nist.gov/vuln/detail/CVE-2020-25649 2020-12-03 2023-02-02 2020-12-03 not_affected code_not_reachable com.fasterxml.jackson.core:jackson-databind is a library which contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. Affected versions of this package are vulnerable to XML External Entity (XXE) Injection. A flaw was found in FasterXML Jackson Databind, where it does not have entity expansion secured properly in the DOMDeserializer class. The highest threat from this vulnerability is data integrity.This command will generate command-line completion scripts, for the this utility, customized for various supported shells.
The completion command can be invoked as follows:
./sbom_utility completion [shell]where valid values for shell are:
- bash
- fish
- powershell
- zsh
The utility supports the help command for the root command as well as any supported commands
For example, to list top-level (root command) help which lists the supported "Available Commands":
./sbom-utility helpA specific command-level help listing is also available. For example, you can access the help for the validate command:
./sbom-utility help validateThis section contains experimental commands that will be promoted once vetted by the community over two or more point releases.
This experimental command will compare two similar BOMs and return the delta (or "diff") in JSON (diff-patch format) or text. This functionality is "JSON aware" and based upon code ancestral to that used to report file diffs between git commits.
- Even with BOMs that SHOULD be similar, it is recommended to use the trim command to remove data that changes within a BOM from one generation to another or is often proprietary such as: bom-ref, hashes, timestamp(s), properties, etc..
- In addition, it is recommended that you also
--normalizetrimmed output data to better guarantee ordering of fields and array data.
- This command is undergoing analysis and tests which are exposing some underlying issues around "moved" objects in dependent diff-patch packages that may not be fixable and have no alternatives.
- Specifically, the means by which "moved" objects are assigned "similarity" scores appears flawed in the case of JSON.
- Additionally, some of the underlying code relies upon Go maps which do not preserve key ordering.
Use the --format flag on the to choose one of the supported output formats:
- txt (default), json
./sbom-utility diff -i test/diff/json-array-order-change-with-add-and-delete-base.json -r test/diff/json-array-order-change-with-add-and-delete-delta.json --format txt --colorize=true -q {
"licenses": [
0: {
"license": {
- "id": "Apache-1.0"
+ "id": "GPL-2.0"
}
},
-+ 2=>1: {
-+ "license": {
-+ "id": "GPL-3.0-only"
-+ }
-+ },
2: {
"license": {
"id": "GPL-3.0-only"
}
},
3: {
"license": {
"id": "MIT"
}
}
]
}Contributions are welcome under the Apache 2.0 license. Help is wanted in the following areas:
The entirety of the code contains the tag "TODO" with comments of things that are features or improvements conceived while authoring the base functionality. Most of these do not have active issues opened form them.
Feel free to "grep" for the "TODO" tag, open an issue and/or submit a draft PR.
An ad-hoc list of featured "TODOs" geared at making the tool more accessible, extensible and useful especially around "core" commands such as validation.
- Merge command Support merge of two (both validated) SBOMs with de-duplication and configurable. Please note that some method of normalization prior to merge will be necessary.
- Remote Schema loading Support using SBOM schema files that are remotely hosted (network accessible) from known, trusted source locations (e.g., releases of SPDX, CycloneDX specification schemas). Note that the config file has an existing
urlfield per entry that can be used for this purpose. - --orderby Support ordering of query result sets by comparison of values from a specified field key.
- license.json Document license policy configuration JSON schema structure and how to add entries relative to a CycloneDX
LicenseChoiceobject for entries with SPDX IDs and those without. - license.json Add entries for all SPDX licenses listed in v3.21.
- See issue: #12
- Go libraries Replace
go-prettyjson,go-multimaplibraries with alternatives that produce maintained releases.
The utility itself is written in Go to advantage the language's built-in typing enforcement and memory safe features and its ability to be compiled for a wide range of target platforms and architectures.
The utility also is designed to produce output formats (e.g., JSON) and handle exit codes consistently to make it immediately useful standalone or as part of automated Continuous Integration (CI) tool chains for downstream use or inspection.
Further commands and reports are planned that prioritize use cases that enable greater insight and analysis of the legal, security and compliance data captured in the SBOM such as component provenance and signage (e.g., verifying resource identities by hashes or fingerprints).
In addition, inclusion of Continuous Integration and Delivery (CI/CD) or "build integrity" information around the BOM component is anticipated as part of the CycloneDX Formulation work which will require features for workflow insights.
The utility additionally prioritizes commands that help provide insight into contents of the BOM to search for and report on missing (i.e., completeness) or specific data requirements (e.g., organization or customer-specific requirements).
In general, the goal of these prioritized commands is to support data verification for many of the primary BOM use cases as identified by the CycloneDX community (see https://cyclonedx.org/use-cases/). Functional development has focused on those use cases that verify inventory (resource identity), legal compliance (e.g., license), and security analysis (e.g., vulnerability) which are foundational to any SBOM.
In the future, we envision support for additional kinds of BOMs (e.g., Hardware (HBOM), Machine Learning (MLBOM), etc.) with each again having different data requirements and levels of maturity which will increase the need for domain-specific validation. Specifically, this utility intends to support the work of the OWASP Software Component Verification Standard (SCVS) which is defining a BOM Maturity Model (BMM).
The following development-oriented topics are included in this section:
- Prerequisites
- Building
- Running from source
- Debugging
- Adding new SBOM formats, schema versions and variants
- Go v1.20.1 or higher: see https://go.dev/doc/install
gitclient: see https://git-scm.com/downloads
To build an executable of the utility compatible with your local computer's architecture use the build target in the project's Makefile:
cd sbom-utility/
make buildThe will produce a binary named sbom-utility with version set to latest in the project's release directory.
$ ls
-rwxr-xr-x 1 User1 staff 11501122 Jan 24 08:29 sbom-utility$ ./sbom-utility version
Welcome to the sbom-utility! Version `latest` (sbom-utility) (darwin/arm64)Note The binary created using make build will be for the local system's operating system and architecture (i.e., GOOS, GOARCH). This would effectively match what would be reported using the uname -s -m unix command when run on the same local system.
If you wish to build binaries for all supported combinations of GOOS and GOARCH values, use the release target (i.e., make release) which will produce named binaries of the form sbom-utility-${GOOS}-${GOARCH} under the release directory (e.g., sbom-utility-darwin-amd64).
Developers can run using the current source code in their local branch using go run main.go. For example:
go run main.go validate -i test/cyclonedx/cdx-1-4-mature-example-1.jsonThis project was developed using VSCode and can be seamlessly loaded as a project.
In order to see global variables while debugging a specific configuration, you can add the "showGlobalVariables": true to it within your launch.json config. file:
{
"showGlobalVariables": true,
"name": "Test name",
"type": "go",
"request": "launch",
"mode": "debug",
"program": "main.go",
"args": ["validate", "-i", "test/cyclonedx/cdx-1-3-min-required.json","-t"]
},or add it globally to the settings.json file:
- Use
Command-Shift-Pto opensettings.json - Select "Preferences: Open Settings (JSON)"
- Add the following block at the top level:
"go.delveConfig": {
"showGlobalVariables": true
},Note: The showGlobalVariables setting was only recently disabled as the default in VSCode as a stop-gap measure due to performance (loading) problems under Windows.
The utility uses the config.json file (either the default, embedded version or the equivalent provided on the command line using --config-schema flag) to lookup supported formats and their associated versioned JSON schema files. To add another SBOM format simply add another entry to the format array in the document:
{
"canonicalName": "SPDX",
"propertyKeyFormat": "SPDXID",
"propertyKeyVersion": "spdxVersion",
"propertyValueFormat": "SPDXRef-DOCUMENT",
"schemas": [
{
...
}
]
...
}The value for propertyKeyFormat should be the exact name of key field that would appear in the JSON SBOM itself which can be used to confirm it is indeed a format match. In addition, the corresponding value to match for that key should be declared in the propertyValueFormat value.
The fields canonicalName, propertyKeyFormat, propertyKeyVersion, and propertyValueFormat are required. The format object MUST have at least one valid schema object.
An example schema object for the canonical SPDX v2.3 (default, no variant) schema appears as follows:
{
{
"version": "SPDX-2.3",
"variant": "",
"name": "SPDX v2.3",
"file": "schema/spdx/2.3/spdx-schema.json",
"development": "https://github.com/spdx/spdx-spec/blob/development/v2.3/schemas/spdx-schema.json",
"url": "https://raw.githubusercontent.com/spdx/spdx-spec/development/v2.3/schemas/spdx-schema.json",
"default": true
},
},- Add a copy of the JSON schema file locally in the project under the structure
resources/schema/<format>/<version>/<schema filename>.- Note If the schema exists under the
resourcesdirectory, it will automatically be embedded in in the executable binary when built usinggo buildwhich includes using the project'sMakefile.
- Note If the schema exists under the
- Assure only one
schemaobject entry for a given format and version has the valuelatestset totrue. This latest schema will be used when the SBOM being validated does not have a clear version declared or used with the--force latestflag. - If you have a customized or "variant" version of a schema (with the same format and version values) you wish to use for validation (e.g., a
corporateorstagingversion with added requirements or for testing an unreleased version), you can create an entry that has the sameversionas another entry, but also declare itsvariantname (non-empty value). This value can be supplied on the commend line with the--variant <variant name>flag to force the validator to use it instead of the default (empty variant value).
Testing implementation and invocation, with examples, is described in this section including:
The built-in go test command will execute all functional tests that appear in files named with the pattern: <filename>_test.go. These files are executed from within the same directory (package) where its respective <filename>.go source code file is located and sets that same as the "working directory".
For example, tests in the validate_test.go file are executed from the cmd subdirectory.
This is normally a problem as the actual test SBOM JSON test files are located relative the project root, one level higher, and would not be found by the "working directory". In order to correct for that, the test working directory is automatically changed for all tests within the TestMain routine found in root_test.go.
The Makefile includes a test target for convenience which will use go test to run all tests found in all subdirectories:
make testThe test_cmd target will use run only the test found in the cmd package:
make test_cmdThe test_schema target will use run only the test found in the schema package:
make test_schemaExample: running all tests in the cmd package:
go test github.com/CycloneDX/sbom-utility/cmd -vExample: running all tests in the schema package:
go test github.com/CycloneDX/sbom-utility/schema -vRun in "quiet" mode to not see error test output:
go test github.com/CycloneDX/sbom-utility/cmd -v --quietrun an individual test within the cmd package:
go test github.com/CycloneDX/sbom-utility/cmd -v -run TestValidateCdx14MinRequiredBasicSimply append the flags --args --trace or --args --debug to your go test command to enable trace or debug output for your designated test(s):
go test github.com/CycloneDX/sbom-utility/cmd -v --args --traceNote: You should always use the --args flag of go test as this will assure non-conflict with go test built-in flags which is the case with the --trace flag.
Several tests will still output error and warning messages as designed. If these messages are distracting, you can turn them off using the --quiet flag.
go test github.com/CycloneDX/sbom-utility/cmd -v --quietIn order to initiate the release workflow, simply go to the release page of the repository:
and click on the Draft a new release button. Follow the instructions to create a new version tag, provide an appropriate release title and description and publish the release. The GitHub release workflow will be triggered automatically.
For local development, you may choose to make a release on your machine using the Makefile directive release:
make releaseAfter all builds are done, the binaries and config. files can be verified to be in the target release directory:
ls releasetotal 131680
drwxr-xr-x 8 User1 staff 256 Jan 27 14:43 .
drwxr-xr-x 27 User1 staff 864 Jan 27 14:43 ..
-rw-r--r-- 1 User1 staff 7121 Jan 27 14:43 config.json
-rw-r--r-- 1 User1 staff 1346 Jan 27 14:43 custom.json
-rw-r--r-- 1 User1 staff 62532 Jan 27 14:43 license.json
-rwxr-xr-x 1 User1 staff 11336640 Jan 27 14:43 sbom-utility-darwin-amd64
-rwxr-xr-x 1 User1 staff 11146770 Jan 27 14:43 sbom-utility-darwin-arm64
-rwxr-xr-x 1 User1 staff 11495647 Jan 27 14:43 sbom-utility-linux-amd64
-rwxr-xr-x 1 User1 staff 11076025 Jan 27 14:43 sbom-utility-linux-arm64
-rwxr-xr-x 1 User1 staff 11416576 Jan 27 14:43 sbom-utility-windows-amd64
-rwxr-xr-x 1 User1 staff 10934272 Jan 27 14:43 sbom-utility-windows-arm64
...- Please also note that the common
*.jsonconfiguration files are also copied to thereleasedirectory.
to produce a release version you can set the following flags and invoke go build directly:
BINARY=sbom-utility
VERSION=latest
LDFLAGS=-ldflags "-X main.Version=${VERSION} -X main.Binary=${BINARY}"
$ go build ${LDFLAGS} -o ${BINARY}TODO: Update the Makefile's release target to conditionally pull the release version from environment variable values and only uses the hardcoded values as defaults when not found in the runtime build environment.
- NTIA - SBOM Minimum Requirements
- CISA - Software Bill of Materials (SBOM)
- FOSSA - Software Bill Of Materials: Formats, Use Cases, and Tools
- CycloneDX Specification Overview
- GitHub: https://github.com/CycloneDX
- Specifications (by branch): https://github.com/CycloneDX/specification
- Schemas (all versions): https://github.com/CycloneDX/specification/tree/master/schema
- Examples: https://github.com/CycloneDX/sbom-examples
- CycloneDX Tool Center : https://cyclonedx.org/tool-center/
-
CycloneDX Use Cases (comprehensive), including:
-
CycloneDX Vulnerability Exploitability Exchange (VEX) format Overview
-
GitHub: https://github.com/spdx
- Specifications (by branch): https://github.com/spdx/spdx-spec
- Schemas (by branch):
- SPDX Examples: https://github.com/spdx/spdx-examples
-
Tools
- SPDX Online Tool
- Note Used the convert tool to convert SPDX examples from
.tvformat to.json; however, conversion ofexample6-bin.spdxresulted in an error.
- Note Used the convert tool to convert SPDX examples from
- SPDX Online Tool
