unlshd-007

New changes

• API version changed to 6.1 due to OFW updates, Extra apps pack update is already done! Download it from link below
• Halloween theme + animation :) (by @Svaarich) (will be disabled on first days of November)
• Plugins: Add new plugin - HC-SR04 Distance sensor (original by Sanqui) - Ported and modified by @xMasterX - How to connect -> (5V -> VCC) / (GND -> GND) / (13|TX -> Trig) / (14|RX -> Echo)
• Plugins: Snake -> Allow food to spawn anywhere (by @TQMatvey | PR #130)
• Plugins: Use clear power in temp sensor plugin
• Plugins: WS -> add protocol Acurite 592TXR (OFW PR 1916 by Skorpionm)
• Plugins: WS -> fix oregon2 flags, and protocol type
• Fixed wrong fbt arguments in tasks.json in vscode example config -> plugin_dist -> fap_dist
• OFW PR: TikTok: reset cursor after enter and reconnect (OFW PR 1921 by gornekich)
• OFW: Furi: smaller crash routine (breaking change, API version increased because of that)

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-007.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

unlshd-006

New changes

• API version changed to 5.1 due to OFW updates, Extra apps pack update is ready, download it from link below
• OFW: SubGHz: Move Oregon2 protocol to Weather Station plugin
• OFW: Gui: update statusbar attention icon and better crash handling (breaking change, API version increased because of that)

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-006.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

unlshd-005

New changes

• Fixed bug with RAW subghz file names (was unable to emulate file from mobile app) - NOT related to android app bug!

Note: Version naming changed to be more clear what version is newer, now we using -> unlshd-123 where 123 is build number

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-005.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

unlshd-004

New changes

• Plugins: Update TOTP (by akopachov)

Note: Version naming changed to be more clear what version is newer, now we using -> unlshd-123 where 123 is build number

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-004.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

unlshd-003

New changes

• Allow UID emulation of EMV cards, allow saving EMV cards
• PR: SubGHz Remote (UniRFRemix) - Cleaned up error checking + Bug fix (by @ESurge | PR #124)
• Plugins -> PR: Snake: Allow snake to turn anywhere (by @TQMatvey | PR #125)
• OFW PR: Dap-link: fix C symbol (OFW PR 1905 by DrZlo13)

Note: Version naming changed to be more clear what version is newer, now we using -> unlshd-123 where 123 is build number

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-003.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

unlshd-002

New changes

• Plugins: Added Temperature Sensor Plugin - HTU21D / SI7021 (By Mywk) - How to Connect

Note: Version naming changed to be more clear what version is newer, now we using -> unlshd-123 where 123 is build number

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-002.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

unlshd-001

New changes

• Plugins: Added GPS (By ezod) works with module NMEA 0183 via UART
• Plugins: Added i2c Tools (By NaejEL)
• Infrared: Updated universal remote assets (by @amec0e)
• OFW -> WS: add protocol Acurite-606TX - And thanks to Dimme#1601 for recordings!
• OFW -> WS: history, added display of the channel (if any) in the general list
• OFW -> WS: added display of the button state if it is on the transmitter, and displaying the data that is in the signal
• OFW -> WS: fix batt info
• OFW -> WS: add protocol LaCrosse_TX141THBv2
• OFW: FuriHal: add FuriHalCortexTimer, use it for i2c bus timeouts
• OFW: CMSIS DAP/DAP Link Debugger
• OFW: Fix FuriString oplist (init move)

Note: Version naming changed to be more clear what version is newer, now we using -> unlshd-123 where 123 is build number

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-001.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

un1-9a9abd

New changes

• PR: New Frequency analyzer, history of 4 elements, ability to select frequency from history and hold OK to go into Read (by @derskythe | PR #121)

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-un1-9a9abd.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

un1-79c304

New changes

• Plugins: SubGHz Bruteforcer - added Chamberlain 9bit 433Mhz, plus some fixes
• SubGHz: Added 434.19 and 434.62 Mhz to user config
• OFW PR: SubGhz: remove dead code
• OFW PR: SubGhz: rename SubGhzPresetDefinition into SubGhzRadioPreset, cleanup subghz types.
• OFW: fbt: fixed dependency issues with SDK definition file

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-un1-79c304.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater

un2-72713d

New changes

• Plugins: SubGHz Bruteforcer - added Chamberlain 7bit and 8bit

Previous changes

• PR -> NFC: New mifare classic keys (by @ankris812 | PR #119)
• New API version 3.2 -> 4.1 (due to breaking changes in subghz part) (update for extra apps pack is already done, download it by link below)
• OFW PR: WeatherStation plugin and SubGHz changes (OFW PR 1833 by Skorpionm)
• OFW: Allow pins 0 and 1 as RTS/DTR for USB UART Bridge
• OFW: Picopass: Read Elite
• OFW: SubGhz: CAME Wrong number of bits in key (add protocol Airforce)
• OFW: Forced RAW receive option for Infrared CLI
• OFW: scripts: fixed c2 bundle format

Note: Your old subghz files with Protocol: Magellen will not work, you need to change Magellen to Magellan in them via any text editor

🎲 Download extra apps pack

-> How to install firmware

-> Download qFlipper 1.2.1 (allows .tgz installation) (official link)

Please support development of the project

• Boosty: https://boosty.to/mmxdev
• ETH/BSC/ERC20-Tokens: 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
• BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
• DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
• LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Self-update package (update from microSD) - flipper-z-f7-update-un2-72713d.zip or download .tgz for iOS mobile app / qFlipper

Update using qFlipper (1.2.0+) is now possible with .tgz update package! Also you can use Web Updater or self-update package.

Install via Web Updater