Add tendencies and fluxes to variable output

[ma595]

Enables utgw and vtgw variable output.

Passes lchnk to gw_nlgw_dp_ml(state1,ptend,lchnk) as I was getting "block out of bounds" errors with ncol passed to outfld function.

This PR registers UFLUX_NL, VFLUX_NL, UTGW_NL and VTGW_NL in gw_nlgw_dp_init routine using addfld, and then outputs tendencies using outfld. The following changes need to be made to user_nl_cam:

nhtfrq=0,-24
mfilt=1,1400

fincl2 = 'U:I','V:I','T:I','UTGW_NL:I','VTGW_NL:I'

I believe 'I' corresponds to instantaneous and 'A' to time averaged. Care has to be taken to register the output variables properly. This is something I need to experiment wit.

IMPORTANT: Then make sure to run ./preview_namelists.

NOTES: I tried with ncol and pcols passed to outfld and this led to the block error.

Output successfully reports write:

 file CAM_non-local-intel.cam.h0.1979-01-01-00000.nc to write         288
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-03600.nc to write         289
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-07200.nc to write         290
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-10800.nc to write         291
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-14400.nc to write         292
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-18000.nc to write         293
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-21600.nc to write         294
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-25200.nc to write         295
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-28800.nc to write         296
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-32400.nc to write         297
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-36000.nc to write         298
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-39600.nc to write         299
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-43200.nc to write         300
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-46800.nc to write         301
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-50400.nc to write         302
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-54000.nc to write         303
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-57600.nc to write         304
 Opened file CAM_non-local-intel.cam.h0.1979-01-01-61200.nc to write         305

And atm_in reports that UTGW and VTGW is properly registered.

TODO before merging:

• Remove pcols experimentation.
• Neaten
• Add fluxes as well
• Check that this compiles
• Check that UTGW, VTGW, UFLUX and VFLUX are output and provide output syntax here.
• Check whether grid is output

[ma595]

ncdump -h CAM_non-local-intel.cam.h2.1979-01-01-00000.nc
netcdf CAM_non-local-intel.cam.h2.1979-01-01-00000 {
dimensions:
	ncol = 48600 ;
	time = UNLIMITED ; // (4 currently)
	nbnd = 2 ;
	chars = 8 ;
	lev = 93 ;
	ilev = 94 ;
	trop_cld_lev = 84 ;
variables:
	double lat(ncol) ;
		lat:long_name = "latitude" ;
		lat:units = "degrees_north" ;
	double lon(ncol) ;
		lon:long_name = "longitude" ;
		lon:units = "degrees_east" ;
	double areawt(ncol) ;
		areawt:long_name = "physics column area weight" ;
	double area(ncol) ;
		area:long_name = "physics column areas" ;
	double lev(lev) ;
		lev:long_name = "hybrid level at midpoints (1000*(A+B))" ;
		lev:units = "hPa" ;
		lev:positive = "down" ;
	double hyam(lev) ;
		hyam:long_name = "hybrid A coefficient at layer midpoints" ;
		hyam:units = "1" ;
	double hybm(lev) ;
		hybm:long_name = "hybrid B coefficient at layer midpoints" ;
		hybm:units = "1" ;
	double ilev(ilev) ;
		ilev:long_name = "hybrid level at interfaces (1000*(A+B))" ;
		ilev:units = "hPa" ;
		ilev:positive = "down" ;
	double hyai(ilev) ;
		hyai:long_name = "hybrid A coefficient at layer interfaces" ;
		hyai:units = "1" ;
	double hybi(ilev) ;
		hybi:long_name = "hybrid B coefficient at layer interfaces" ;
		hybi:units = "1" ;
	double trop_cld_lev(trop_cld_lev) ;
		trop_cld_lev:long_name = "troposphere hybrid level at midpoints (1000*(A+B))" ;
		trop_cld_lev:units = "hPa" ;
		trop_cld_lev:positive = "down" ;
	double time(time) ;
		time:long_name = "time" ;
		time:units = "days since 1979-01-01 00:00:00" ;
		time:calendar = "noleap" ;
		time:bounds = "time_bnds" ;
	int date(time) ;
		date:long_name = "current date (YYYYMMDD)" ;
	int datesec(time) ;
		datesec:long_name = "current seconds of current date" ;
	double time_bnds(time, nbnd) ;
		time_bnds:long_name = "time interval endpoints" ;
	char date_written(time, chars) ;
	char time_written(time, chars) ;
	int ndbase ;
		ndbase:long_name = "base day" ;
	int nsbase ;
		nsbase:long_name = "seconds of base day" ;
	int nbdate ;
		nbdate:long_name = "base date (YYYYMMDD)" ;
	int nbsec ;
		nbsec:long_name = "seconds of base date" ;
	int mdt ;
		mdt:long_name = "timestep" ;
		mdt:units = "s" ;
	int ndcur(time) ;
		ndcur:long_name = "current day (from base day)" ;
	int nscur(time) ;
		nscur:long_name = "current seconds of current day" ;
	double co2vmr(time) ;
		co2vmr:long_name = "co2 volume mixing ratio" ;
	double ch4vmr(time) ;
		ch4vmr:long_name = "ch4 volume mixing ratio" ;
	double n2ovmr(time) ;
		n2ovmr:long_name = "n2o volume mixing ratio" ;
	double f11vmr(time) ;
		f11vmr:long_name = "f11 volume mixing ratio" ;
	double f12vmr(time) ;
		f12vmr:long_name = "f12 volume mixing ratio" ;
	double sol_tsi(time) ;
		sol_tsi:long_name = "total solar irradiance" ;
		sol_tsi:units = "W/m2" ;
	int nsteph(time) ;
		nsteph:long_name = "current timestep" ;
	float UTGW_NL(time, lev, ncol) ;
		UTGW_NL:mdims = 1 ;
		UTGW_NL:units = "m/s2" ;
		UTGW_NL:long_name = "Nonlinear GW zonal wind tendency" ;
	float VTGW_NL(time, lev, ncol) ;
		VTGW_NL:mdims = 1 ;
		VTGW_NL:units = "m/s2" ;
		VTGW_NL:long_name = "Nonlinear GW meridional wind tendency" ;

// global attributes:
		:ne = 30 ;
		:fv_nphys = 3 ;
		:Conventions = "CF-1.0" ;
		:source = "CAM" ;
		:case = "CAM_non-local-intel" ;
		:logname = "matta" ;
		:host = "deg0004" ;
		:initial_file = "/glade/campaign/cesm/cesmdata/inputdata/atm/cam/inic/se/cam7_FMT_ne30pg3_mg17_L93_c221118.nc" ;
		:topography_file = "/glade/campaign/cesm/cesmdata/inputdata/atm/cam/topo/se/ne30pg3_gmted2010_modis_bedmachine_nc3000_Laplace0100_20230105.nc" ;
		:model_doi_url = "not_set" ;
		:time_period_freq = "hour_3" ;
}