(REVERTED & UNDONE!) Update STLinux v4.1.0 #5
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 583585e ] Fix one kernel NULL pointer dereference as below: [ 224.462334] Call Trace: [ 224.462394] __tcp_bpf_recvmsg+0xd3/0x380 [ 224.462441] ? sock_has_perm+0x78/0xa0 [ 224.462463] tcp_bpf_recvmsg+0x12e/0x220 [ 224.462494] inet_recvmsg+0x5b/0xd0 [ 224.462534] __sys_recvfrom+0xc8/0x130 [ 224.462574] ? syscall_trace_enter+0x1df/0x2e0 [ 224.462606] ? __do_page_fault+0x2de/0x500 [ 224.462635] __x64_sys_recvfrom+0x24/0x30 [ 224.462660] do_syscall_64+0x5d/0x1d0 [ 224.462709] entry_SYSCALL_64_after_hwframe+0x65/0xca In commit 9974d37 ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()"), we change last sg check to sg_is_last(), but in sockmap redirection case (without stream_parser/stream_verdict/ skb_verdict), we did not mark the end of the scatterlist. Check the sk_msg_alloc, sk_msg_page_add, and bpf_msg_push_data functions, they all do not mark the end of sg. They are expected to use sg.end for end judgment. So the judgment of '(i != msg_rx->sg.end)' is added back here. Fixes: 9974d37 ("skmsg: Fix invalid last sg check in sk_msg_recvmsg()") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20220809094915.150391-1-liujian56@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14b20b7 ] The verifier cannot perform sufficient validation of any pointers passed into bpf_attr and treats them as integers rather than pointers. The helper will then read from arbitrary pointers passed into it. Restrict the helper to CAP_PERFMON since the security model in BPF of arbitrary kernel read is CAP_BPF + CAP_PERFMON. Fixes: af2ac3e ("bpf: Prepare bpf syscall to be used from kernel and user space.") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220816205517.682470-1-zhuyifei@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d6620f ] Syzkaller reported a triggered kernel BUG as follows: ------------[ cut here ]------------ kernel BUG at kernel/bpf/cgroup.c:925! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0 Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84 28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48 8b 0c5 RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578 RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000 R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00 FS: 00007f68213d2b80(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0 Call Trace: <TASK> cgroup_bpf_prog_detach+0xcc/0x100 __sys_bpf+0x2273/0x2a00 __x64_sys_bpf+0x17/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f68214dbcb9 Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff8 RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9 RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009 RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003 R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20 R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Repetition steps: For the following cgroup tree, root | cg1 | cg2 1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs attach type is NONE or OVERRIDE. 2. write 1 to /proc/thread-self/fail-nth for failslab. 3. detach prog1 for cg1, and then kernel BUG occur. Failslab injection will cause kmalloc fail and fall back to purge_effective_progs. The problem is that cg2 have attached another prog, so when go through cg2 layer, iteration will add pos to 1, and subsequent operations will be skipped by the following condition, and cg will meet NULL in the end. `if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))` The NULL cg means no link or prog match, this is as expected, and it's not a bug. So here just skip the no match situation. Fixes: 4c46091 ("bpf: Fix KASAN use-after-free Read in compute_effective_progs") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220813134030.1972696-1-pulehui@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afe7116 ] There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. Fixes: 58e9683 ("net: ieee802154: adf7242: Fix OCL calibration runs") Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20220808034224.12642-1-linma@zju.edu.cn Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cc42fb ] In a long overdue refactoring, split out backlight code to new intel_backlight.[ch]. Simple code movement, leave renames for follow-up work. No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/97d310848f03061473b9b2328e2c5c4dcf263cfa.1629888677.git.jani.nikula@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 868e8e5 ] Commit 20f85ef ("drm/i915/backlight: use unique backlight device names") added support for multiple backlight devices on dual panel systems, but did so with error handling on -EEXIST from backlight_device_register(). Unfortunately, that triggered a warning in dmesg all the way down from sysfs_add_file_mode_ns() and sysfs_warn_dup(). Instead of optimistically always attempting to register with the default name ("intel_backlight", which we have to retain for backward compatibility), check if a backlight device with the name exists first, and, if so, use the card and connector based name. v2: reworked on top of the patch commit 20f85ef ("drm/i915/backlight: use unique backlight device names") v3: fixed the ref count leak(Jani N) Fixes: 20f85ef ("drm/i915/backlight: use unique backlight device names") Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com (cherry picked from commit 4234ea3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6376ab0 ] The module and function information can be added with 'modprobe foo dyndbg=+pmf' Suggested-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220616220559.136160-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e6481a ] The struct nhlt_format's fmt_config is a flexible array, it must not be used as normal array. When moving to the next nhlt_fmt_cfg we need to take into account the data behind the ->config.caps (indicated by ->config.size). Fixes: a864e8f ("ALSA: hda: intel-nhlt: verify config type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com> Link: https://lore.kernel.org/r/20220823122405.18464-1-peter.ujfalusi@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d776763 ] The return type is supposed to be ssize_t, which is signed long, but "r" was declared as unsigned int. This means that on 64 bit systems we return positive values instead of negative error codes. Fixes: 80a3511 ("cfg80211: add debugfs HT40 allow map") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YutvOQeJm0UjLhwU@kili Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8531aa1 ] This reverts commit 83810f8. Turning off port power in shutdown did cause issues such as a laptop not proprly powering off, and some specific usb devies failing to enumerate the subsequent boot after a warm reset. So revert this. Fixes: 83810f8 ("xhci: turn off port power in shutdown") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7498a45 ] Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would have the checksum included up to next multiple of 4 (a 77 bytes packet would have 3 bytes of ethernet checksum included). The check for the value expects it in host (Little) endian. Fixes: f3cad26 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce9f2b ] Commit 744d23c ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not properly stopping and restarting the PHY during suspend/resume. Correct that by indicating that the MAC is in charge of PHY PM operations and ensure that all MDIO bus activity is quiescent during suspend. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fba863b ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Fixes: 2aa70f8 ("net: smsc911x: Quieten netif during suspend") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220825023951.3220-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a87406f ] ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids() allocates array via kmalloc. If for some reason new_vport() fails during ovs_dp_cmd_new() dp->upcall_portids must be freed. Add missing kfree. Kmemleak example: unreferenced object 0xffff88800c382500 (size 64): comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s) hex dump (first 32 bytes): 5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff ^.y..z8..!8..... 03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00 ............(... backtrace: [<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0 [<000000000187d8bd>] ovs_dp_change+0x63/0xe0 [<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380 [<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150 [<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0 [<00000000fa10e377>] netlink_rcv_skb+0x50/0x100 [<000000004959cece>] genl_rcv+0x24/0x40 [<000000004699ac7f>] netlink_unicast+0x23e/0x360 [<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0 [<000000006f4aa380>] sock_sendmsg+0x62/0x70 [<00000000d0068654>] ____sys_sendmsg+0x230/0x270 [<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0 [<0000000011776020>] __sys_sendmsg+0x59/0xa0 [<000000002e8f2dc1>] do_syscall_64+0x3b/0x90 [<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: b83d23a ("openvswitch: Introduce per-cpu upcall dispatch") Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com> Link: https://lore.kernel.org/r/20220825020326.664073-1-andrey.zhadchenko@virtuozzo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8ae9f ] xrs700x_read_port_counters() updates the stats from a worker using the u64_stats_update_begin() version. This is okay on 32-UP since on the reader side preemption is disabled. On 32bit-SMP the writer can be preempted by the reader at which point the reader will spin on the seqcount until writer continues and completes the update. Assigning the mib_mutex mutex to the underlying seqcount would ensure proper synchronisation. The API for that on the u64_stats_init() side isn't available. Since it is the only user, just use disable interrupts during the update. Use u64_stats_update_begin_irqsave() on the writer side to ensure an uninterrupted update. Fixes: ee00b24 ("net: dsa: add Arrow SpeedChips XRS700x driver") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b05972f ] The issue is the same to commit c2999f7 ("net: sched: multiq: don't call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Fixes: c266f64 ("net: sched: protect block state with mutex") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f612466 ] In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails to attach qdisc because there is no memory in attach_one_default_qdisc(). Then dev->qdisc will be noop_qdisc by default. But the other queues may be able to successfully attach to default qdisc. In this case, the fallback to noqueue process will be triggered. If the original attached qdisc is not released and a new one is directly attached, this will cause netdevice reference leaks. The following is the bug log: veth0: default qdisc (fq_codel) fail, fallback to noqueue unregister_netdevice: waiting for veth0 to become free. Usage count = 32 leaked reference. qdisc_alloc+0x12e/0x210 qdisc_create_dflt+0x62/0x140 attach_one_default_qdisc.constprop.41+0x44/0x70 dev_activate+0x128/0x290 __dev_open+0x12a/0x190 __dev_change_flags+0x1a2/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x332/0x1150 __rtnl_newlink+0x52f/0x8e0 rtnl_newlink+0x43/0x70 rtnetlink_rcv_msg+0x140/0x3b0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1bb/0x290 netlink_sendmsg+0x37c/0x4e0 sock_sendmsg+0x5f/0x70 ____sys_sendmsg+0x208/0x280 Fix this bug by clearing any non-noop qdiscs that may have been assigned before trying to re-attach. Fixes: bf6dba7 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0955bf ] The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c5 ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a1a274 ] This patch adds logic to compute the MDIO period based on the i1clk, and thereafter write the MDIO period into the YU MDIO config register. The i1clk resource from the ACPI table is used to provide addressing to YU bootrecord PLL registers. The values in these registers are used to compute MDIO period. If the i1clk resource is not present in the ACPI table, then the current default hardcorded value of 430Mhz is used. The i1clk clock value of 430MHz is only accurate for boards with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs have i1clk = 500MHz, but can support a slower MDIO period. Fixes: f92e186 ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fc29ff ] strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. Reported-and-tested-by: syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com Reported-by: syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com Fixes: e557124 ("kcm: Check if sk_user_data already set in kcm_attach") Fixes: dff8baa ("kcm: Call strp_stop before strp_done in kcm_attach") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90fabae ] When the GSO splitting feature of sch_cake is enabled, GSO superpackets will be broken up and the resulting segments enqueued in place of the original skb. In this case, CAKE calls consume_skb() on the original skb, but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into assuming the original skb still exists, when it really has been freed. Fix this by adding the __NET_XMIT_STOLEN flag to the return value in this case. Fixes: 0c85034 ("sch_cake: Conditionally split GSO segments") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231 Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c70521 ] challenge_timestamp can be read an written by concurrent threads. This was expected, but we need to annotate the race to avoid potential issues. Following patch moves challenge_timestamp and challenge_count to per-netns storage to provide better isolation. Fixes: 354e4aa ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b4f688 ] This reverts commit 90fabae. Patch was applied hastily, revert and let the v2 be reviewed. Fixes: 90fabae ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb") Link: https://lore.kernel.org/all/87wnao2ha3.fsf@toke.dk/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8424a9 ] For passive connections, the refcount increment has been done in smc_clcsock_accept()-->smc_sock_alloc(). Fixes: 3b2dec2 ("net/smc: restructure client and server code in af_smc") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ef3f2a ] This patch updates device status array range from 11 to 12 as we will be reading status from device number 0 to device number 11 inclusive. Without this patch we can potentially access status array out of range during auto-enumeration. Fixes: aa1262c ("soundwire: qcom: Check device status before reading devid") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220708104747.8722-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 846651e upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e230a44 upstream. _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. Fixes: 2865d42 ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@kernel.org> Reported-by: Zheng Wang <hackerzheng666@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2fa9e1 upstream. The old rtl8188eu module, removed in commit 55dfa29 ("staging: rtl8188eu: remove rtl8188eu driver from staging dir") (Linux kernel v5.15-rc1), required (through a MODULE_FIRMWARE call()) the rtlwifi/rtl8188eufw.bin firmware file, which the new r8188eu driver no longer requires. I have tested a few RTL8188EUS-based Wi-Fi cards and, while supported by both drivers, they do not work when using the new one and the firmware wasn't manually loaded. According to Larry Finger, the module maintainer, all such cards need the firmware and the driver should depend on it (see the linked mails). Add a proper MODULE_FIRMWARE() call, like it was done in the old driver. Thanks to Greg Kroah-Hartman and Larry Finger for quick responses to my questions. Cc: stable <stable@kernel.org> Link: https://answers.launchpad.net/ubuntu/+source/linux-meta-hwe-5.15/+question/702611 Link: https://lore.kernel.org/lkml/YukkBu3TNODO3or9@nx64de-df6d00/ Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl> Link: https://lore.kernel.org/r/YulcdKfhA8dPQ78s@nx64de-df6d00 Acked-by: Phillip Potter <phil@philpotter.co.uk> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7acee3 upstream. Christophe Leroy reported that commit 7b45371 ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke mpc85xx_defconfig + CONFIG_RELOCATABLE=y. LD vmlinux SYSMAP System.map SORTTAB vmlinux CHKREL vmlinux WARNING: 451 bad relocations c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54 c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224 c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4 c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8 ... The compiler emits a bunch of R_PPC_UADDR32, which is not supported by arch/powerpc/kernel/reloc_32.S. The reason is there exists an unaligned symbol. $ powerpc-linux-gnu-nm -n vmlinux ... c0b31258 d spe_aligninfo c0b31298 d __func__.0 c0b312a9 D sys_call_table c0b319b8 d __func__.0 Commit 7b45371 is not the root cause. Even before that, I can reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y + CONFIG_MODVERSIONS=n. It is just that nobody noticed because when CONFIG_MODVERSIONS is enabled, a __crc_* symbol inserted before sys_call_table was hiding the unalignment issue. Adding alignment to the syscall table for ppc32 fixes the issue. Cc: stable@vger.kernel.org Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Trim change log discussion, add Cc stable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/ Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 566f9c9 upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Tested-by: Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3f2fd2 upstream. Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because of an older issue with the depencency. It is not necessary to forbid NOP_USB_XCEIV=y in combination with USB_MUSB_HDRC=m, but only the reverse, which causes the link failure from the original Kconfig change. Use the correct dependency to still allow NOP_USB_XCEIV=n or NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m to fix the multi_v7_defconfig for tusb. Fixes: ab37a7a ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in") Fixes: c044247 ("usb: musb: Fix randconfig build issues for Kconfig options") Cc: stable <stable@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220818135737.3143895-10-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM32MP13 DK with non-crypto SoC won't be produced. Remove its support. Change-Id: Ide4ee02eb58a1622f3a9200bd425f2fa58af518a Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/266807 Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com>
…sitory Add contributing guide to STMicroelectronics/linux repository. Change-Id: Iab6814410323b74633d6146052557fe2ff438423 Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/269088 Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com>
Add security guide to STMicroelectronics/linux repository. Change-Id: I870e05acc5cc61e873dadef0428e551946159868 Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/269089 Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com>
The oversampling ratio is shared by all channels, no matter the type (e.g. single ended or differential). Currently two attributes are declared for each type: - in_voltage-voltage_oversampling_ratio in_voltage-voltage_oversampling_ratio_available - in_voltage_oversampling_ratio in_voltage_oversampling_ratio_available Use the "info_mask_shared_by_all" instead of "info_mask_shared_by_type". Initial value reported after probe is '0' which isn't a valid ratio. (it should be at least 1 by default, e.g. no oversampling). Fix it by storing the oversampling index in the array, instead of its value in adc struct. This fixes the initial condition. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Change-Id: Ibb015e32522be01b94d05fd01896ad77fbc31540 Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/269087 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Olivier MOYSAN <olivier.moysan@foss.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com>
Both instances ethernet based on GMAC SNPS IP on stm32mp13, Ethernet1 is on RMII mode with quartz Ethernet2 is on RMII mode without quartz Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Change-Id: I2d1a85ecbcd2cd25dbedaf995b86c3e02a7b0c40 Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/268924 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Alexandre TORGUE <alexandre.torgue@foss.st.com>
This command execute and assert + reset delay + deassert + check if deassert is ok. In a driver we can replace these lines reset_control_assert(reset); reset_control_deassert(reset); by reset_control_reset(reset); Change-Id: I7852084b78a641ae1ff7e1c7c954af0d3b2e1538 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/234580 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: Alexandre TORGUE <alexandre.torgue@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/269014 Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Add reset timing in match data structure for MP13. Change-Id: Ie0138deff786900dc97f781a97a1ce8a2ab00399 Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/269015 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Alexandre TORGUE <alexandre.torgue@foss.st.com>
…vice tree. Not sure if this is needed.
Add SPI1, SPI2, SPI3, SPI4, SPI5 bus clocks. Change-Id: I55049c3a27d3698cf300fd86f5691161684b94ce Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/271637 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Alexandre TORGUE <alexandre.torgue@foss.st.com>
These clocks are needed for I2S. Change-Id: I3b8e50cf54e7725435ebc2f6341835a2e970b84f Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/271638 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Alexandre TORGUE <alexandre.torgue@foss.st.com>
The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09 ("serial: stm32: add support for RS485 hardware control mode") Cc: stable@kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Change-Id: I2f1f2c0675180f65c524948a9103d03abf8f4ee8 Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/272029 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Amelie DELAUNAY <amelie.delaunay@foss.st.com>
Add stm32_pctrl_get_desc_pin_from_gpio function to find a stm32 pin descriptor which is matching with a gpio. Most of the time pin number is equal to pin index in array. So the first part of the function is useful to speed up. And during gpio bank register, we set default gpio names with pin names. Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Change-Id: I4bf65ae77cc3f01d2e81c3944d3be69f00f70aff Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/271696 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Antonio Maria BORNEO <antonio.borneo@st.com> Reviewed-by: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Amelie DELAUNAY <amelie.delaunay@foss.st.com>
Some GPIO providers set names for GPIO lines that match the names of the pins on the SoC, or variations on that theme. These names are generic more often that not, such as pioC12 in the at91 case. These generic names block the possibility to set more useful GPIO line names with device properties (i.e. gpio-line-names). Allow overriding a generic name given by the GPIO driver if there is a name given to the GPIO line using device properties, but leave the generic name alone if no better name is available. However, there is a risk. If user space is depending on the above mentioned fixed GPIO names, AND there are device properties that previously did not reach the surface, the name change might cause regressions. But hopefully this stays below the radar... Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Change-Id: I26f7f2e1dcc49a7496da0d36ee526a4594189890 Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/271951 Reviewed-by: CITOOLS <MDG-smet-aci-reviews@list.st.com> Reviewed-by: CIBUILD <MDG-smet-aci-builds@list.st.com> Reviewed-by: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Reviewed-by: Antonio Maria BORNEO <antonio.borneo@st.com> Reviewed-by: Eric FOURMONT <eric.fourmont-ext@st.com> Domain-Review: Amelie DELAUNAY <amelie.delaunay@foss.st.com>
|
Well dopey me I merged this into the incorrect branch, should have used the Datum 5.15 branch, not the mirrored STMicro 5.15 branch. The PR should be ignored, and NO ACTIONS (revert, delete branch, etc) should ever be taken on this page. |
mcarlin-ds
changed the title
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
commit 60eed1e upstream. code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Apr 18, 2023
[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] STMicroelectronics#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] STMicroelectronics#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 STMicroelectronics#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 STMicroelectronics#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 STMicroelectronics#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 STMicroelectronics#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 STMicroelectronics#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc STMicroelectronics#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d STMicroelectronics#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 STMicroelectronics#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 91d6a46 ] gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to unlock it too. Instead the mutex is handled by the function gpi_alloc_chan_resources(), which properly locks and unlocks the mutex. ===================================== WARNING: bad unlock balance detected! 6.3.0-rc5-00253-g99792582ded1-dirty STMicroelectronics#15 Not tainted ------------------------------------- kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at: [<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc but there are no more locks to release! other info that might help us debug this: 6 locks held by kworker/u16:0/9: #0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594 #2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 #3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 #4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280 #5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c stack backtrace: CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty STMicroelectronics#15 Hardware name: Google Pixel 3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0xa0/0xfc show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_unlock_imbalance_bug+0x130/0x148 lock_release+0x270/0x300 __mutex_unlock_slowpath+0x48/0x2cc mutex_unlock+0x20/0x2c gpi_alloc_chan_resources+0x108/0x5bc dma_chan_get+0x84/0x188 dma_get_slave_channel+0x5c/0x10c gpi_of_dma_xlate+0x110/0x1a0 of_dma_request_slave_channel+0x174/0x280 dma_request_chan+0x3c/0x2d4 geni_i2c_probe+0x544/0x63c platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 device_add+0x60c/0x7d8 of_device_add+0x44/0x60 of_platform_device_create_pdata+0x90/0x124 of_platform_bus_create+0x15c/0x3c8 of_platform_populate+0x58/0xf8 devm_of_platform_populate+0x58/0xbc geni_se_probe+0xf0/0x164 platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 Fixes: 5d0c353 ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230409233355.453741-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d STMicroelectronics#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 63f8793 ] Make sure to check device queue mode in the null_validate_conf() and return error for NULL_Q_RQ as we don't allow legacy I/O path, without this patch we get OOPs when queue mode is set to 1 from configfs, following are repro steps :- modprobe null_blk nr_devices=0 mkdir config/nullb/nullb0 echo 1 > config/nullb/nullb0/memory_backed echo 4096 > config/nullb/nullb0/blocksize echo 20480 > config/nullb/nullb0/size echo 1 > config/nullb/nullb0/queue_mode echo 1 > config/nullb/nullb0/power Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null) due to oops @ 0xffffffffc041c329 CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk] Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20 RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00 RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002 R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740 FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0 DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> nullb_device_power_store+0xd1/0x120 [null_blk] configfs_write_iter+0xb4/0x120 vfs_write+0x2ba/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fd4460c57a7 Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7 RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001 RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0 R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700 </TASK> Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Link: https://lore.kernel.org/r/20230416220339.43845-1-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit 98bea25 ] Log load and replay is part of the metadata handle flow during mount operation. The $MFT record will be loaded and used while replaying logs. However, a malformed $MFT record, say, has RECORD_FLAG_DIR flag set and contains an ATTR_ROOT attribute will misguide kernel to treat it as a directory, and try to free the allocated resources when the corresponding inode is freed, which will cause an invalid kfree because the memory hasn't actually been allocated. [ 101.368647] BUG: KASAN: invalid-free in kvfree+0x2c/0x40 [ 101.369457] [ 101.369986] CPU: 0 PID: 198 Comm: mount Not tainted 6.0.0-rc7+ #5 [ 101.370529] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 101.371362] Call Trace: [ 101.371795] <TASK> [ 101.372157] dump_stack_lvl+0x49/0x63 [ 101.372658] print_report.cold+0xf5/0x689 [ 101.373022] ? ni_write_inode+0x754/0xd90 [ 101.373378] ? kvfree+0x2c/0x40 [ 101.373698] kasan_report_invalid_free+0x77/0xf0 [ 101.374058] ? kvfree+0x2c/0x40 [ 101.374352] ? kvfree+0x2c/0x40 [ 101.374668] __kasan_slab_free+0x189/0x1b0 [ 101.374992] ? kvfree+0x2c/0x40 [ 101.375271] kfree+0x168/0x3b0 [ 101.375717] kvfree+0x2c/0x40 [ 101.376002] indx_clear+0x26/0x60 [ 101.376316] ni_clear+0xc5/0x290 [ 101.376661] ntfs_evict_inode+0x45/0x70 [ 101.377001] evict+0x199/0x280 [ 101.377432] iput.part.0+0x286/0x320 [ 101.377819] iput+0x32/0x50 [ 101.378166] ntfs_loadlog_and_replay+0x143/0x320 [ 101.378656] ? ntfs_bio_fill_1+0x510/0x510 [ 101.378968] ? iput.part.0+0x286/0x320 [ 101.379367] ntfs_fill_super+0xecb/0x1ba0 [ 101.379729] ? put_ntfs+0x1d0/0x1d0 [ 101.380046] ? vsprintf+0x20/0x20 [ 101.380542] ? mutex_unlock+0x81/0xd0 [ 101.380914] ? set_blocksize+0x95/0x150 [ 101.381597] get_tree_bdev+0x232/0x370 [ 101.382254] ? put_ntfs+0x1d0/0x1d0 [ 101.382699] ntfs_fs_get_tree+0x15/0x20 [ 101.383094] vfs_get_tree+0x4c/0x130 [ 101.383675] path_mount+0x654/0xfe0 [ 101.384203] ? putname+0x80/0xa0 [ 101.384540] ? finish_automount+0x2e0/0x2e0 [ 101.384943] ? putname+0x80/0xa0 [ 101.385362] ? kmem_cache_free+0x1c4/0x440 [ 101.385968] ? putname+0x80/0xa0 [ 101.386666] do_mount+0xd6/0xf0 [ 101.387228] ? path_mount+0xfe0/0xfe0 [ 101.387585] ? __kasan_check_write+0x14/0x20 [ 101.387979] __x64_sys_mount+0xca/0x110 [ 101.388436] do_syscall_64+0x3b/0x90 [ 101.388757] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 101.389289] RIP: 0033:0x7fa0f70e948a [ 101.390048] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 101.391297] RSP: 002b:00007ffc24fdecc8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 101.391988] RAX: ffffffffffffffda RBX: 000055932c183060 RCX: 00007fa0f70e948a [ 101.392494] RDX: 000055932c183260 RSI: 000055932c1832e0 RDI: 000055932c18bce0 [ 101.393053] RBP: 0000000000000000 R08: 000055932c183280 R09: 0000000000000020 [ 101.393577] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055932c18bce0 [ 101.394044] R13: 000055932c183260 R14: 0000000000000000 R15: 00000000ffffffff [ 101.394747] </TASK> [ 101.395402] [ 101.396047] Allocated by task 198: [ 101.396724] kasan_save_stack+0x26/0x50 [ 101.397400] __kasan_slab_alloc+0x6d/0x90 [ 101.397974] kmem_cache_alloc_lru+0x192/0x5a0 [ 101.398524] ntfs_alloc_inode+0x23/0x70 [ 101.399137] alloc_inode+0x3b/0xf0 [ 101.399534] iget5_locked+0x54/0xa0 [ 101.400026] ntfs_iget5+0xaf/0x1780 [ 101.400414] ntfs_loadlog_and_replay+0xe5/0x320 [ 101.400883] ntfs_fill_super+0xecb/0x1ba0 [ 101.401313] get_tree_bdev+0x232/0x370 [ 101.401774] ntfs_fs_get_tree+0x15/0x20 [ 101.402224] vfs_get_tree+0x4c/0x130 [ 101.402673] path_mount+0x654/0xfe0 [ 101.403160] do_mount+0xd6/0xf0 [ 101.403537] __x64_sys_mount+0xca/0x110 [ 101.404058] do_syscall_64+0x3b/0x90 [ 101.404333] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 101.404816] [ 101.405067] The buggy address belongs to the object at ffff888008cc9ea0 [ 101.405067] which belongs to the cache ntfs_inode_cache of size 992 [ 101.406171] The buggy address is located 232 bytes inside of [ 101.406171] 992-byte region [ffff888008cc9ea0, ffff888008cca280) [ 101.406995] [ 101.408559] The buggy address belongs to the physical page: [ 101.409320] page:00000000dccf19dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cc8 [ 101.410654] head:00000000dccf19dd order:2 compound_mapcount:0 compound_pincount:0 [ 101.411533] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 101.412665] raw: 000fffffc0010200 0000000000000000 dead000000000122 ffff888003695140 [ 101.413209] raw: 0000000000000000 00000000800e000e 00000001ffffffff 0000000000000000 [ 101.413799] page dumped because: kasan: bad access detected [ 101.414213] [ 101.414427] Memory state around the buggy address: [ 101.414991] ffff888008cc9e80: fc fc fc fc 00 00 00 00 00 00 00 00 00 00 00 00 [ 101.415785] ffff888008cc9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 101.416933] >ffff888008cc9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 101.417857] ^ [ 101.418566] ffff888008cca000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 101.419704] ffff888008cca080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Nov 7, 2023
[ Upstream commit bdc1c5f ] In binder_transaction_buffer_release() the 'failed_at' offset indicates the number of objects to clean up. However, this function was changed by commit 44d8047 ("binder: use standard functions to allocate fds"), to release all the objects in the buffer when 'failed_at' is zero. This introduced an issue when a transaction buffer is released without any objects having been processed so far. In this case, 'failed_at' is indeed zero yet it is misinterpreted as releasing the entire buffer. This leads to use-after-free errors where nodes are incorrectly freed and subsequently accessed. Such is the case in the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_read+0xc40/0x1f30 Read of size 8 at addr ffff4faf037cfc58 by task poc/474 CPU: 6 PID: 474 Comm: poc Not tainted 6.3.0-12570-g7df047b3f0aa #5 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5b8 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 binder_thread_read+0xc40/0x1f30 binder_ioctl+0xd9c/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] Allocated by task 474: kasan_save_stack+0x3c/0x64 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x34 __kasan_kmalloc+0xb8/0xbc kmalloc_trace+0x48/0x5c binder_new_node+0x3c/0x3a4 binder_transaction+0x2b58/0x36f0 binder_thread_write+0x8e0/0x1b78 binder_ioctl+0x14a0/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] Freed by task 475: kasan_save_stack+0x3c/0x64 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x5c __kasan_slab_free+0xe8/0x154 __kmem_cache_free+0x128/0x2bc kfree+0x58/0x70 binder_dec_node_tmpref+0x178/0x1fc binder_transaction_buffer_release+0x430/0x628 binder_transaction+0x1954/0x36f0 binder_thread_write+0x8e0/0x1b78 binder_ioctl+0x14a0/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] ================================================================== In order to avoid these issues, let's always calculate the intended 'failed_at' offset beforehand. This is renamed and wrapped in a helper function to make it clear and convenient. Fixes: 32e9f56 ("binder: don't detect sender/target during buffer cleanup") Reported-by: Zi Fan Tan <zifantan@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230505203020.4101154-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
pushed a commit
that referenced
this pull request
Sep 13, 2024
[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb STMicroelectronics#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 STMicroelectronics#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 STMicroelectronics#15 [ffff88aa841efb88] device_del at ffffffff82179d23 STMicroelectronics#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] STMicroelectronics#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] STMicroelectronics#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a STMicroelectronics#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff STMicroelectronics#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 STMicroelectronics#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is part of a major update to STMicro OpenSTLinux Ecosystem version 4.1.0. The new kernel is rebased on the official Linux kernel v5.15.67. The new ecosystem requires optee secure boot. This PR boots to the Linux kernel properly with the corresponding PRs to optee-os, u-boot, and arm-trusted-firmware.