conf tweaks

Djonker83 · Jun 5, 2023 · cfe3e57 · cfe3e57
1 parent 6de11bd
commit cfe3e57
Show file tree

Hide file tree

Showing 3 changed files with 6 additions and 369 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -3289,7 +3289,7 @@
    * UNIFONT   - Lightweight font, no anti-aliasing. Supports Latin Extended and non-Latin characters.
    * HELVETICA - Lightweight font, no anti-aliasing. Supports Basic Latin (0x0020-0x007F) and Latin-1 Supplement (0x0080-0x00FF) characters only.
    */
-  #define TFT_FONT  NOTOSANS
+  #define TFT_FONT NOTOSANS 
 
   //#define TFT_SHARED_IO   // I/O is shared between TFT display and other devices. Disable async data transfer.
 #endif

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
@@ -482,9 +482,9 @@
 #define AUTOTEMP
 #if ENABLED(AUTOTEMP)
   #define AUTOTEMP_OLDWEIGHT 0.98     // Factor used to weight previous readings (0.0 < value < 1.0)
-  #define AUTOTEMP_MIN          210
-  #define AUTOTEMP_MAX          250
-  #define AUTOTEMP_FACTOR       0.1f
+  #define AUTOTEMP_MIN 210         
+  #define AUTOTEMP_MAX 250         
+  #define AUTOTEMP_FACTOR 0.1f      
   // Turn on AUTOTEMP on M104/M109 by default using proportions set here
   //#define AUTOTEMP_PROPORTIONAL
   #if ENABLED(AUTOTEMP_PROPORTIONAL)
@@ -1364,7 +1364,7 @@
  * Multi-stepping sends steps in bursts to reduce MCU usage for high step-rates.
  * This allows higher feedrates than the MCU could otherwise support.
  */
-#define MULTISTEPPING_LIMIT   16  //: [1, 2, 4, 8, 16, 32, 64, 128]
+#define MULTISTEPPING_LIMIT 16    //: [1, 2, 4, 8, 16, 32, 64, 128]
 
 /**
  * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
@@ -2196,7 +2196,7 @@
   //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
   //#define BABYSTEP_INVERT_Z               // Enable if Z babysteps should go the other way
   //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
-  #define BABYSTEP_MULTIPLICATOR_Z  1       // (steps or mm) Steps or millimeter distance for each Z babystep
+  #define BABYSTEP_MULTIPLICATOR_Z 1        // (steps or mm) Steps or millimeter distance for each Z babystep
   #define BABYSTEP_MULTIPLICATOR_XY 1       // (steps or mm) Steps or millimeter distance for each XY babystep
 
   //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.