Formatting + Port QB Changes

overrides/config-overrides/expert/betterquesting/DefaultQuests.json

@@ -2464,7 +2464,7 @@
       "properties:10": {
         "betterquesting:10": {
           "autoclaim:1": 0,
-          "desc:8": "§oNote: this quest accepts any §oLV Energy Converter§o.\n\n§rThe §3Steam Dynamos§r you have made are capable of generating §aRF power§r, but §bGregTech§r machines require §aEU power§r.\n\n§cNote that the two are incompatible!§r\n\nWith your first §6circuit§r in hand, you are ready to build a §eLow Voltage (LV) §2Energy Converter§r.\n\nThe §2Energy Converter§r is a special device that §econverts §2between §aRF power§r and §aEU power§r. They come in §2four sizes: 1A, 4A, 8A, and 16A.\n\n§aRF§r converts into §aEU§r at a §e4 to 1 ratio§r. §a100 RF§r becomes §a25 EU§r, and vice-versa. §2Use a Soft Hammer to change the conversion direction.",
+          "desc:8": "§oNote: this quest accepts any §oLV Energy Converter§o.\n\n§rThe §3Steam Dynamos§r you have made are capable of generating §aRF power§r, but §bGregTech§r machines require §aEU power§r.\n\n§cNote that EU machines cannot use RF! §2However, EU is automatically converted to RF as needed.§r\n\nWith your first §6circuit§r in hand, you are ready to build a §eLow Voltage (LV) §2Energy Converter§r.\n\nThe §2Energy Converter§r is a special device that §econverts §2between §aRF power§r and §aEU power§r. They come in §2four sizes: 1A, 4A, 8A, and 16A.\n\n§aRF§r converts into §aEU§r at a §e4 to 1 ratio§r. §a100 RF§r becomes §a25 EU§r, and vice-versa.",
           "globalshare:1": 0,
           "icon:10": {
             "Count:3": 1,
@@ -49917,7 +49917,7 @@
       "properties:10": {
         "betterquesting:10": {
           "autoclaim:1": 0,
-          "desc:8": "§oNote: This quest accepts both Memory Cards, and Advanced Memory Cards.§r\n\nA §6P2P Tunnel§r (§aPoint-to-Point Tunnel§r) is a powerful tool from §bApplied Energistics 2§r that can be used to send items, redstone, RF/EU or fluids from one location to another, using your ME system, without the need to use any disk storage space. §cTransporting RF/EU has a 5% tax on the input energy.§r\n\nEach P2P tunnel system may have §aany number of inputs§r and §aany number of outputs§r. There is no limit on how many P2P tunnels, or P2P tunnel systems, you can have on one network.\n\nBy default, a P2P tunnel is an §6ME tunnel§r, which transmits Applied Energistics channels and power. Since channels are disabled, you will most likely not be using the default tunnel. You can change the mode of your P2P tunnels by right clicking the tunnel with the respective item seen in §bJEI§r.\n\nTo configure your P2P tunnels, take a §6Memory Card§r. While holding the memory card, §ashift-right click§r the unconfigured tunnel, to set the frequency of the input, and save the frequency to the memory card. Once the first tunnel has been set up this way and the memory card is configured with the frequency, any subsequent tunnel you §aright-click§r with the memory card will be set as the output of the most recent frequency used. Alternatively, you can set a P2P tunnel as an §einput§r by §aright-clicking§r the tunnel with the §ecard in your off-hand§r.\n\nYou can also use memory cards to copy the configuration of ME blocks and tile-entities, such as §6Interfaces§r and §6Storage Buses§r. §aShift-right click§r a ME block to copy its configuration, and §aright-click§r to paste that configuration. Note that this doesn\u0027t copy upgrades applied to the block.\n\nYou can also §ashift-right click§r to empty the frequency, or the ME block configuration, set in the card.\n\nThis pack has §bBetter P2P§r, which adds the §6Advanced Memory Card§r. Using it, you can §aright-click§r on any ME device or cable that is attached to the current system. This will allow you to see all your current P2P connections without having to search for your tunnels.\n\nYou can also configure P2P tunnels using your Advanced Memory Card. While holding the card, §aright-click§r on a tunnel, it will be §aselected§r. Once a tunnel is selected, it will be highlighted in §agreen§r. You can also see your other connections with the options to select or bind; hitting select will reselect the tunnel.\n\nAn incorrect setup will show in §cred§r (Usually P2P device without input).\n\nThe §6Advanced Memory Card§r has 3 modes accessible in the §3GUI§r:\n\n§aBind Output§r:\nOnce the tunnel you would like to be set as an input has been §aselected§r, hitting §bbind§r on any other connection will turn the selected tunnel into an input tunnel, and any binded tunnels will be turned into output tunnels for the selected tunnel.\n\n§aBind Input§r:\nOnce the tunnel you would like to be set as an output has been §aselected§r, hitting §bbind§r on any other tunnel will set the tunnel as the input of the selected tunnel. This is useful for when you can’t find the output tunnel.\n \n§aCopy Output§r:\nOnce an output tunnel you want to copy has been §aselected§r, hitting §bbind§r on any other connection will copy the output frequency of the selected tunnel.",
+          "desc:8": "§oNote: This quest accepts both Memory Cards, and Advanced Memory Cards.§r\n\nA §6P2P Tunnel§r (§aPoint-to-Point Tunnel§r) is a powerful tool from §bApplied Energistics 2§r that can be used to send items, redstone, RF/EU or fluids from one location to another, using your ME system, without the need to use any disk storage space.\n\n§6RF P2P§r requires a §c5% RF tax§r which is taken from your energy cells.\n\n§cIf your ME network doesn\u0027t have enough energy storage capacity RF P2P throughput rate will be limited accordingly, since you need to be able to store (and provide) enough energy to pay for all the tax in a tick at once.§r\n\n§2EU input into an RF P2P tunnel will be automatically converted to RF as usual.§r Input is limited to 2.1 billion RF/t while the output is limited only by the total across all inputs. (World accelerated energy sources are able to bypass the input limit, since they send energy multiple times per tick.)\n\n§6EU P2P§r preserves both voltage and amperage and also has a §c5% tax§r, but deducts it from the throughput instead: §2No energy cells are necessary, §cbut only 95% of the EU reaches the output.§r EU P2P has no practical throughput limit.§r\n\nEach P2P tunnel system may have §aany number of inputs§r and §aany number of outputs§r. There is no limit on how many P2P tunnels, or P2P tunnel systems, you can have on one network.\n\nBy default, a P2P tunnel is an §6ME tunnel§r, which transmits Applied Energistics channels and power. Since channels are disabled, you will most likely not be using the default tunnel. You can change the mode of your P2P tunnels by right clicking the tunnel with the respective item seen in §bJEI§r.\n\nTo configure your P2P tunnels, take a §6Memory Card§r. While holding the memory card, §ashift-right click§r the unconfigured tunnel, to set the frequency of the input, and save the frequency to the memory card. Once the first tunnel has been set up this way and the memory card is configured with the frequency, any subsequent tunnel you §aright-click§r with the memory card will be set as the output of the most recent frequency used. Alternatively, you can set a P2P tunnel as an §einput§r by §aright-clicking§r the tunnel with the §ecard in your off-hand§r.\n\nYou can also use memory cards to copy the configuration of ME blocks and tile-entities, such as §6Interfaces§r and §6Storage Buses§r. §aShift-right click§r a ME block to copy its configuration, and §aright-click§r to paste that configuration. Note that this doesn\u0027t copy upgrades applied to the block.\n\nYou can also §ashift-right click§r to empty the frequency, or the ME block configuration, set in the card.\n\nThis pack has §bBetter P2P§r, which adds the §6Advanced Memory Card§r. Using it, you can §aright-click§r on any ME device or cable that is attached to the current system. This will allow you to see all your current P2P connections without having to search for your tunnels.\n\nYou can also configure P2P tunnels using your Advanced Memory Card. While holding the card, §aright-click§r on a tunnel, it will be §aselected§r. Once a tunnel is selected, it will be highlighted in §agreen§r. You can also see your other connections with the options to select or bind; hitting select will reselect the tunnel.\n\nAn incorrect setup will show in §cred§r (Usually P2P device without input).\n\nThe §6Advanced Memory Card§r has 3 modes accessible in the §3GUI§r:\n\n§aBind Output§r:\nOnce the tunnel you would like to be set as an input has been §aselected§r, hitting §bbind§r on any other connection will turn the selected tunnel into an input tunnel, and any binded tunnels will be turned into output tunnels for the selected tunnel.\n\n§aBind Input§r:\nOnce the tunnel you would like to be set as an output has been §aselected§r, hitting §bbind§r on any other tunnel will set the tunnel as the input of the selected tunnel. This is useful for when you can’t find the output tunnel.\n \n§aCopy Output§r:\nOnce an output tunnel you want to copy has been §aselected§r, hitting §bbind§r on any other connection will copy the output frequency of the selected tunnel.",
           "globalshare:1": 0,
           "icon:10": {
             "Count:3": 1,

overrides/config-overrides/normal/betterquesting/DefaultQuests.json

@@ -2897,7 +2897,7 @@
       "properties:10": {
         "betterquesting:10": {
           "autoclaim:1": 0,
-          "desc:8": "§oNote: this quest accepts any §oLV Energy Converter§o.\n\n§rThe §3Steam Dynamos§r you have made are capable of generating §aRF power§r, but §bGregTech§r machines require §aEU power§r. With your first §6circuit§r in hand, you are ready to build a §eLow Voltage (LV) §2Energy Converter§r.\n\n§cNote that the two are incompatible!§r\n\nThe §2Energy Converter§r is a special device that §econverts §2between §aRF power§r and §aEU power§r. They come in §2four sizes: 1A, 4A, 8A, and 16A.\n\n§aRF§r converts into §aEU§r at a §e4 to 1 ratio§r. §a100 RF§r becomes §a25 EU§r, and vice-versa. §2Use a Soft Hammer to change the conversion direction.",
+          "desc:8": "§oNote: this quest accepts any §oLV Energy Converter§o.\n\n§rThe §3Steam Dynamos§r you have made are capable of generating §aRF power§r, but §bGregTech§r machines require §aEU power§r. With your first §6circuit§r in hand, you are ready to build a §eLow Voltage (LV) §2Energy Converter§r.\n\n§cNote that EU machines cannot use RF! §2However, EU is automatically converted to RF as needed.§r\n\nThe §2Energy Converter§r is a special device that §econverts §2between §aRF power§r and §aEU power§r. They come in §2four sizes: 1A, 4A, 8A, and 16A.\n\n§aRF§r converts into §aEU§r at a §e4 to 1 ratio§r. §a100 RF§r becomes §a25 EU§r, and vice-versa.",
           "globalshare:1": 0,
           "icon:10": {
             "Count:3": 1,
@@ -63206,7 +63206,7 @@
       "properties:10": {
         "betterquesting:10": {
           "autoclaim:1": 0,
-          "desc:8": "§oNote: This quest accepts both Memory Cards, and Advanced Memory Cards.§r\n\nA §6P2P Tunnel§r (§aPoint-to-Point Tunnel§r) is a powerful tool from §bApplied Energistics 2§r that can be used to send items, redstone, RF/EU or fluids from one location to another, using your ME system, without the need to use any disk storage space. §cTransporting RF/EU has a 5% tax on the input energy.§r\n\nEach P2P tunnel system may have §aany number of inputs§r and §aany number of outputs§r. There is no limit on how many P2P tunnels, or P2P tunnel systems, you can have on one network.\n\nBy default, a P2P tunnel is an §6ME tunnel§r, which transmits Applied Energistics channels and power. Since channels are disabled, you will most likely not be using the default tunnel. You can change the mode of your P2P tunnels by right clicking the tunnel with the respective item seen in §bJEI§r.\n\nTo configure your P2P tunnels, take a §6Memory Card§r. While holding the memory card, §ashift-right click§r the unconfigured tunnel, to set the frequency of the input, and save the frequency to the memory card. Once the first tunnel has been set up this way and the memory card is configured with the frequency, any subsequent tunnel you §aright-click§r with the memory card will be set as the output of the most recent frequency used. Alternatively, you can set a P2P tunnel as an §einput§r by §aright-clicking§r the tunnel with the §ecard in your off-hand§r.\n\nYou can also use memory cards to copy the configuration of ME blocks and tile-entities, such as §6Interfaces§r and §6Storage Buses§r. §aShift-right click§r a ME block to copy its configuration, and §aright-click§r to paste that configuration. Note that this doesn\u0027t copy upgrades applied to the block.\n\nYou can also §ashift-right click§r to empty the frequency, or the ME block configuration, set in the card.\n\nThis pack has §bBetter P2P§r, which adds the §6Advanced Memory Card§r. Using it, you can §aright-click§r on any ME device or cable that is attached to the current system. This will allow you to see all your current P2P connections without having to search for your tunnels.\n\nYou can also configure P2P tunnels using your Advanced Memory Card. While holding the card, §aright-click§r on a tunnel, it will be §aselected§r. Once a tunnel is selected, it will be highlighted in §agreen§r. You can also see your other connections with the options to select or bind; hitting select will reselect the tunnel.\n\nAn incorrect setup will show in §cred§r (Usually P2P device without input).\n\nThe §6Advanced Memory Card§r has 3 modes accessible in the §3GUI§r:\n\n§aBind Output§r:\nOnce the tunnel you would like to be set as an input has been §aselected§r, hitting §bbind§r on any other connection will turn the selected tunnel into an input tunnel, and any binded tunnels will be turned into output tunnels for the selected tunnel.\n\n§aBind Input§r:\nOnce the tunnel you would like to be set as an output has been §aselected§r, hitting §bbind§r on any other tunnel will set the tunnel as the input of the selected tunnel. This is useful for when you can’t find the output tunnel.\n \n§aCopy Output§r:\nOnce an output tunnel you want to copy has been §aselected§r, hitting §bbind§r on any other connection will copy the output frequency of the selected tunnel.",
+          "desc:8": "§oNote: This quest accepts both Memory Cards, and Advanced Memory Cards.§r\n\nA §6P2P Tunnel§r (§aPoint-to-Point Tunnel§r) is a powerful tool from §bApplied Energistics 2§r that can be used to send items, redstone, RF/EU or fluids from one location to another, using your ME system, without the need to use any disk storage space.\n\n§6RF P2P§r requires a §c5% RF tax§r which is taken from your energy cells.\n\n§cIf your ME network doesn\u0027t have enough energy storage capacity RF P2P throughput rate will be limited accordingly, since you need to be able to store (and provide) enough energy to pay for all the tax in a tick at once.§r\n\n§2EU input into an RF P2P tunnel will be automatically converted to RF as usual.§r Input is limited to 2.1 billion RF/t while the output is limited only by the total across all inputs. (World accelerated energy sources are able to bypass the input limit, since they send energy multiple times per tick.)\n\n§6EU P2P§r preserves both voltage and amperage and also has a §c5% tax§r, but deducts it from the throughput instead: §2No energy cells are necessary, §cbut only 95% of the EU reaches the output.§r EU P2P has no practical throughput limit.§r\n\nEach P2P tunnel system may have §aany number of inputs§r and §aany number of outputs§r. There is no limit on how many P2P tunnels, or P2P tunnel systems, you can have on one network.\n\nBy default, a P2P tunnel is an §6ME tunnel§r, which transmits Applied Energistics channels and power. Since channels are disabled, you will most likely not be using the default tunnel. You can change the mode of your P2P tunnels by right clicking the tunnel with the respective item seen in §bJEI§r.\n\nTo configure your P2P tunnels, take a §6Memory Card§r. While holding the memory card, §ashift-right click§r the unconfigured tunnel, to set the frequency of the input, and save the frequency to the memory card. Once the first tunnel has been set up this way and the memory card is configured with the frequency, any subsequent tunnel you §aright-click§r with the memory card will be set as the output of the most recent frequency used. Alternatively, you can set a P2P tunnel as an §einput§r by §aright-clicking§r the tunnel with the §ecard in your off-hand§r.\n\nYou can also use memory cards to copy the configuration of ME blocks and tile-entities, such as §6Interfaces§r and §6Storage Buses§r. §aShift-right click§r a ME block to copy its configuration, and §aright-click§r to paste that configuration. Note that this doesn\u0027t copy upgrades applied to the block.\n\nYou can also §ashift-right click§r to empty the frequency, or the ME block configuration, set in the card.\n\nThis pack has §bBetter P2P§r, which adds the §6Advanced Memory Card§r. Using it, you can §aright-click§r on any ME device or cable that is attached to the current system. This will allow you to see all your current P2P connections without having to search for your tunnels.\n\nYou can also configure P2P tunnels using your Advanced Memory Card. While holding the card, §aright-click§r on a tunnel, it will be §aselected§r. Once a tunnel is selected, it will be highlighted in §agreen§r. You can also see your other connections with the options to select or bind; hitting select will reselect the tunnel.\n\nAn incorrect setup will show in §cred§r (Usually P2P device without input).\n\nThe §6Advanced Memory Card§r has 3 modes accessible in the §3GUI§r:\n\n§aBind Output§r:\nOnce the tunnel you would like to be set as an input has been §aselected§r, hitting §bbind§r on any other connection will turn the selected tunnel into an input tunnel, and any binded tunnels will be turned into output tunnels for the selected tunnel.\n\n§aBind Input§r:\nOnce the tunnel you would like to be set as an output has been §aselected§r, hitting §bbind§r on any other tunnel will set the tunnel as the input of the selected tunnel. This is useful for when you can’t find the output tunnel.\n \n§aCopy Output§r:\nOnce an output tunnel you want to copy has been §aselected§r, hitting §bbind§r on any other connection will copy the output frequency of the selected tunnel.",
           "globalshare:1": 0,
           "icon:10": {
             "Count:3": 1,