Skip to content

Duet3D/CNC-Pendant-Firmware

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

26 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CNC-Pendant-Firmware

This is firmware to run on an Arduino Pro Micro (preferred) or Arduino Nano to interface a popular style of wired CNC pendant to the PanelDue port of Duet electronics. Build it using Arduino IDE.

The code on the master branch send commands with checksums to RRF, suitable for older versions RRF. If you use the PanelDue pass-through facility then you need to use an older version of PanelDueFirmware that uses checksums, because it does not recognise CRCs from PanelDue.

The code on the crc16 branch sends commands with CRC to RRF with a CRC instead. This works with newer versions of RRF and provides better integrity protection. If the PanelDue pass-through facility is used, it accepts either CRCs or checksums from PanelDue.

For a full guide to building the pendant, see the Duet3D wiki here.

Wiring

Pendant to Arduino Pro Micro wiring:

Pro Micro Pendant Wire colours
VCC +5V red
GND 0V
COM
CN
LED-
black
orange/black
blue/black
white/black
D2 A green
D3 B white
D4 X yellow
D5 Y yellow/black
D6 Z brown
D7 4 brown/black
D8 5 pink (if present)
D9 6 pink/black (if present)
D10 LED+ green/black
A0 STOP blue
A1 X1 grey
A2 X10 grey/black
A3 X100 orange
NC /A
/B
violet
violet/black

Arduino Pro Micro to Duet 3 IO_0 connector or Duet 2 PanelDue connector wiring (3- or 4-core cable):

Pro Micro Duet
VCC +5V (red wire)
GND GND (yellow wire)
TXO
GND
Through 6K8 resistor to IO_0_IN (Duet 3) or URXD0 (Duet 2)
Also connect 10K resistor between GND and IO_0_IN (Duet 3) or URXD0 (Duet 2) (blue wire from resistor junction to Duet)

To connect a PanelDue as well (the Arduino Pro Micro passes the PanelDue commands through to the Duet):

PanelDue Pro Micro / Duet
+5V +5V/VCC (red wire to Ardiuno or Duet)
GND GND (yellow wire to Ardiuno or Duet)
DIN Duet IO_0_OUT (Duet 3) or UTXD0 (Duet 2) (green wire)
DOUT Pro Micro RXI (blue wire of PanelDue cable to green wire of pendant cable)

For wiring differences and hardware changes needed if using an Arduino Nano, see the comments at the start of the CNC-pendant.ino file.

Support requests

Please use the forum for support requests.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages