WARNING! These instructions are now outdated, as they relate to the Ginkgo release of Open edX. As of March 2019, the current release of Open edX is Ironwood. But do not despair! I have created Tutor, a tool for installing Open edX in one click. Try it, it's amazing! Here is the documentation, and there is a also ready-to-launch AMI on AWS.
What follows are the instructions for installing an Open edX instance (Ginkgo release) from scratch. The instructions below do not rely on Ansible playbooks for deployment.
The instructions listed here do not constitute a one-click install (not at all). You will need to read the various configuration files and understand what all the commands do. As such, it's an installation manual for experts only.
Do I need this? Why not just use the Ansible playbooks? Great question! Of course, the instructions listed here are heavily inspired by the Ansible playbooks from the edx/configuration repository. The playbooks are the current canonical way of installing an Open edX instance, either on a local or distributed environment. However, we feel there are many cases where the playbooks are not adequate. In particular, it is extremely difficult to understand what the playbooks do if you are not both an Ansible and an Open edX expert. As a consequence, many Open edX administrators do not know very well what services are run, how they coordinate, where to look for information, etc. Also, Open edX has gained an unfair reputation as a very complex piece of software that is difficult to administer. By decomposing the install process in simple steps, we hope to dispel that myth.
I have followed all the instructions but my Open edX install doesn't have feature X. Open edX supports a gazillion optional features. The instructions given in this manual are for a minimal Open edX install. For instance, we explicitly disable the discussion forums. If you wish to activate a particular feature, we suggest you start with a minimal install and then follow the specific instructions from the Open edX documentation for that feature.
The instructions don't work! Where can I ask for help? There are many ways for you to get help from the Open edX community: see the Getting Help page. Note however that edX (or Ned!) is not responsible for maintaining this particular set of instructions. If you feel you have stumbled upon an issue that is specifically related to the current set of instructions, please open a Github issue where you describe your problem in details.
Open edX Ginkgo is compatible with Ubuntu 16.04 -- it is untested with other environments. In the following, we assume a clean install of Ubuntu 16.04. For bootstrapping, we suggest to start from a clean server or virtual machine (see section on vm configuration).
It depends ;-)
You should have at least 2 Gb of RAM for each LMS and each CMS. Thus, a single-server instance running all services as well as one LMS and one CMS should have at least 4 Gb of RAM. Each LMS server should be able to handle a couple hundred users. (this is a very rough estimate)
This section is for people who want to test drive Open edX or to setup a development environment in a VM. Skip ahead if you are deploying on a production environment.
Launch virtual machine:
vagrant init ubuntu/xenial64
Add the following lines to the configuration:
config.vm.network "forwarded_port", guest: 8000, host: 8000
config.vm.network "forwarded_port", guest: 8001, host: 8001
Increase the amount of available memory to 2Gb: (actually, it is recommended to get that to 4Gb if you have enough RAM)
config.vm.provider "virtualbox" do |vb|
vb.memory = "2048"
end
Boot virtual machine:
vagrant up
Login:
vagrant ssh
Add some swap:
sudo fallocate -l 1G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
sudo sh -c 'echo "/swapfile none swap sw 0 0" >> /etc/fstab'
All following commands are assumed to be run in the VM.
sudo apt update
sudo apt upgrade -y
sudo apt autoremove -y
Install base packages:
sudo apt install -y language-pack-en git python-virtualenv
sudo apt install -y build-essential software-properties-common curl git-core libxml2-dev libxslt1-dev python-pip libmysqlclient-dev python-apt python-dev libxmlsec1-dev libfreetype6-dev swig gcc g++
Create unprivileged user which will run the web applications:
sudo adduser edxapp
sudo -sHu edxapp
Note that the edxapp user does not have sudo rights, so all following commands that are run with sudo will have to be run with a different user; for instance, the user with which you created the edxapp user. This is on purpose, as edxapp will be used to run the web services. But if you want to grant sudo rights to edxapp, run : sudo usermod -a -G sudo edxapp.
Create folder in which everything will be installed:
sudo mkdir /opt/openedx
sudo chown edxapp:edxapp /opt/openedx
You will need to setup a couple external services to get Open edX to run. In the development install, it is assumed that they all run on the same machine.
Install memcached:
sudo apt install memcached
Create SQL database:
# Install mysql server
sudo apt install mysql-server mysql-client
# Create the mysql database and user
mysql -u root -p
CREATE DATABASE edxapp;
CREATE USER 'edxapp'@'localhost' IDENTIFIED BY 'write this password somewhere you will need it in auth.json';
GRANT ALL ON edxapp.* TO 'edxapp'@'localhost';
Install rabbitmq broker:
sudo apt install rabbitmq-server
Install mongodb:
sudo apt install mongodb-server
Elasticsearch is only required if you need to setup course search or discussion forums. In the current install those services are disabled. But if you wish to activate these services later, you will need to install a specific version of Elasticsearch.
Install elasticsearch 0.90.13 from the official repositories:
wget -O - http://packages.elasticsearch.org/GPG-KEY-elasticsearch | sudo apt-key add -
sudo sh -c 'echo "deb http://packages.elasticsearch.org/elasticsearch/0.90/debian stable main" > /etc/apt/sources.list.d/elasticsearch.list'
sudo apt update
sudo apt install elasticsearch=0.90.13 openjdk-8-jdk
sudo apt-mark hold elasticsearch
In Open edX, there are two distinct web applications that need to be run: the LMS is the public website where courses can be subscribed to, followed, etc. by students. The CMS (also called the studio) is where courses are created and it is accessed only by course authors and platform administrators. Note that the LMS don't have to run on the same servers; however, they need to share all the external services (MySQL, MongoDb, etc.).
From here on, multiple configuration files need to be copied from the current repository and edited. Values that need to be edited are surrounded by triple dashes ("---").
Install packages required by LMS/CMS:
sudo apt install -y gettext gfortran graphviz graphviz-dev libffi-dev libfreetype6-dev libgeos-dev libjpeg8-dev liblapack-dev libpng12-dev libxml2-dev libxmlsec1-dev libxslt1-dev nodejs npm ntp pkg-config
Clone repositories:
cd /opt/openedx
git clone https://github.com/edx/edx-platform.git
cd edx-platform/
git checkout open-release/ginkgo.master
Note: Configuring the JSON files could take a while and requires manual edits to the json files.
Edit config/lms/lms.env.json and copy it to /opt/openedx/lms.env.json.
Edit config/cms/cms.env.json and copy it to /opt/openedx/cms.env.json.
Don't forget to edit all the values surrounded by "---"! In particular, set the SITE_NAME variable to point to your domain name. In development, this will point to localhost:8000 (for the LMS) and localhost:8001 (for the studio).
Edit and copy config/lms/lms.auth.json and config/cms/cms.auth.json to /opt/openedx/lms.auth.json and /opt/openedx/cms.auth.json.
Copy development settings file from config/lms/development.py and config/cms/development.py to /opt/openedx/edx-platform/lms/envs/development.py and /opt/openedx/edx-platform/cms/envs/development.py.
Create necessary folders:
mkdir /opt/openedx/staticfiles
mkdir /opt/openedx/uploads # (must correspond to `MEDIA_ROOT`)
Create virtualenv:
cd /opt/openedx
virtualenv venv && source venv/bin/activate
Install python requirements:
cd edx-platform/
pip install -r requirements/edx/pre.txt
pip install -r requirements/edx/github.txt # go grab a coffee, this is going to take some time
pip install -r requirements/edx/local.txt
pip install -r requirements/edx/base.txt
pip install -r requirements/edx/post.txt
pip install -r requirements/edx/paver.txt
Install node requirements (and others):
nodeenv -p # Install node environment in same virtualenv
paver install_prereqs
Generate assets:
paver update_assets lms --settings=development
paver update_assets cms --settings=development
Run migrations:
./manage.py lms migrate --settings=development
./manage.py cms migrate --settings=development
The following instructions allow you to run LMS and Studio development servers:
paver lms --fast --settings=development
paver studio --fast --settings=development
These development servers should NOT be used in production. For production configuration, follow the instructions from the production deployment section
At that point, you should be able to run the server and access the website.
Quickly, you will find out that you need a staff user to administer your platform. To create a staff user, run:
./manage.py lms --settings=development manage_user --superuser --staff yourusername your@address.com
./manage.py lms --settings=development changepassword yourusername # set an appropriate password
Deploying an Open edX instance in production requires to set up a couple additional services.
You will need to create different settings files for production than for development.
Edit config/lms/production.py and add it to edx-platform/lms/envs/.
Edit config/cms/production.py and add it to edx-platform/cms/envs/.
In production, don't forget to set appropriate urls in /opt/openedx/lms.env.json and /opt/openedx/cms.env.json. Note that you will need to choose different domain names for the LMS and the CMS. In particular, pick an appropriate value for the SITE_NAME.
Usually, the lms is configured on the bare domain name ("myopenedx.com") or on the www subdomain ("www.myopenedx.com"), while cms typically uses the studio subdomain ("studio.myopenedx.com").
Note that if your databases (MySQL and MongoDB) and other external services run on a different machine, you will need to point to them in your lms.auth.json and cms.auth.json files.
It is necessary to generate static assets again with the production settings:
paver update_assets lms --settings=production
paver update_assets cms --settings=production
Static assets will be generated in /opt/openedx/staticfiles.
Supervisor is a tool for process supervision. You will use it to start and stop Open edX-related services.
Start by installing Supervisor:
sudo apt install supervisor
Edit ./config/supervisor/conf.d/lms.conf and add it to /etc/supervisor/conf.d/lms.conf.
Edit ./config/supervisor/conf.d/cms.conf and add it to /etc/supervisor/conf.d/cms.conf.
Reload supervisor configuration:
sudo supervisorctl update
Gunicorn processes should then be running on port 8000 and 8001. If not, check the logs in /var/log/supervisor for errors.
Also, there should be asynchronous celery workers running for the lms and the cms. Run the following command to check if everything runs correctly:
$ sudo supervisorctl status
cms RUNNING pid 3070, uptime 0:00:09
cms:cms_default_1 RUNNING pid 3068, uptime 0:00:09
cms:cms_high_1 RUNNING pid 3071, uptime 0:00:09
cms:cms_low_1 RUNNING pid 3069, uptime 0:00:09
lms RUNNING pid 3092, uptime 0:00:06
lms:lms_default_1 RUNNING pid 3096, uptime 0:00:06
lms:lms_high_1 RUNNING pid 3094, uptime 0:00:06
lms:lms_high_mem_1 RUNNING pid 3095, uptime 0:00:06
lms:lms_low_1 RUNNING pid 3091, uptime 0:00:06
At any point, to reload the gunicorn processes, run either:
sudo supervisorctl restart lms
sudo supervisorctl restart cms
And to reload all lms or cms-related processes, run either:
sudo supervisorctl restart lms:
sudo supervisorctl restart cms:
Nginx is the de facto web server traditionally used in combination with Open edX. Nginx serves two purposes:
- Proxy to gunicorn for dynamic web pages
- Directly serve static files from disk
Start by installing Nginx:
sudo apt install nginx
Edit ./config/nginx/sites-enabled/lms.conf and add it to /etc/nginx/sites-enabled/lms.conf.
Edit ./config/nginx/sites-enabled/cms.conf and add it to /etc/nginx/sites-enabled/cms.conf.
In the above configuration files, you should check that the domain names and the static assets folders are correct.
Reload nginx configuration with:
sudo systemctl reload nginx.service
At that point, the LMS and the CMS should be available at the urls you have specified in the Nginx configuration files. If not, error logs should be available in /var/log/nginx.