The EOS.IO software introduces a new blockchain architecture designed to enable vertical and horizontal scaling of decentralized applications. This is achieved by creating an operating system-like construct upon which applications can be built. The software provides accounts, authentication, databases, asynchronous communication and the scheduling of applications across many CPU cores or clusters. The resulting technology is a blockchain architecture that may ultimately scale to millions of transactions per second, eliminates user fees, and allows for quick and easy deployment and maintenance of decentralized applications, in the context of a governed blockchain.
Full documentation can be found at https://developers.eos.io/
The purpose of this document is to setup you development environment in an agile manner and prepare you for the development of your project ideas.
Let's start creating a local EOSIO network that is not connected to the public network and will be under your full control. It will simulate a close to real network environment.
This guide assumes working on macos or Linux.
To develop smart contracts on EOSIO you will need following skills:
EOSIO based blockchains execute user-generated applications and code using WebAssembly (WASM). WASM is an emerging web standard with widespread support of Google, Microsoft, Apple, and others. At the moment the most mature toolchain for building applications that compile to WASM is clang/llvm with their C/C++ compiler. For best compatibility, it is recommended that you use the EOSIO toolchain.
Other toolchains in development by 3rd parties include: Rust, Python, and Solidity. While these other languages may appear simpler, their performance will likely impact the scale of application you can build. We expect that C++ will be the best language for developing high-performance and secure smart contracts and plan to use C++ for the foreseeable future.
The EOSIO software supports the following environments:
- Amazon 2017.09 and higher
- Centos 7
- Fedora 25 and higher (Fedora 27 recommended)
- Mint 18
- Ubuntu 16.04 (Ubuntu 16.10 recommended)
- Ubuntu 18.04
- MacOS Darwin 10.12 and higher (MacOS 10.13.x recommended)
For this hackathon we will be using EOSIO v.1.4.2 (based on Docker image eosio/eos:v1.4.2) and EOSIO.CDT v.1.3.2
There are a variety of tools provided along with EOSIO which requires you to have basic command line knowledge in order to interact with.
To integrate your dApp with EOSIO you will need some Javascript experience. To interact with EOSIO from the frontend, we’ll use EOSJS library.
To start, we need to have Docker installed on your computer.
Docker is a container management service. The keywords of Docker are "develop", ship and run anywhere". The whole idea of Docker is for developers to easily develop applications, ship them into containers which can then be deployed anywhere.
To install Docker please follow this guide: https://docs.docker.com/install/
We can use any text editor that, preferrably, supports c++ highlighting. One of the popular editors is Sublime Text. Another option is an IDE, which provides a more sophisticated code completion and better development experience.
For the purposes of the hackathon we are recommending you to use an example application our team has built and build on top of it. It includes a Docker container with a single node blockchain and a React frontend with some preinstalled libraries that will help you to start developing in no time.
NoteChain demonstrates the eosio platform running a blockchain as a local single node test net with a simple DApp, NoteChain. NoteChain allows users to create and update notes.
Clone the example app repository:
cd ~
git clone https://github.com/EOSIO/eosio-project-boilerplate-simple
cd eosio-project-boilerplate-simpleand run
./quick_start.shAfter a short setup process your browser should automatically open a new tab on http://localhost:3000/
Copy one of the example accounts information to the UI of the notechain application:
{
"name": "useraaaaaaaa", // This should go to an Account field
"privateKey": "5K7mtrinTFrVTduSxizUc5hjXJEtTjVTsqSHeBHes1Viep86FP5", // This should go to a Private Key fields
"publicKey": "EOS6kYgMTCh1iqpq9XGNQbEi8Q6k5GujefN9DSs55dcjVyFAq7B6b"
}
add some test copy in the Note field and press 'Add/Update Note'. As a result, you should get a new note created in the frontend of the application.
Congrats! You have a very simple single node blockchain and a simple application running on your computer!
Also go to this address in the browser to check that RPC interface is working: http://localhost:8888/v1/chain/get_info
You should see a message similar to following:
{
"server_version": "75635168",
"chain_id": "cf057bbfb72640471fd910bcb67639c22df9f92470936cddc1ade0e2f2e7dc4f",
"head_block_num": 2511,
"last_irreversible_block_num": 2510,
"last_irreversible_block_id": "000009ce07f8934fd8a6498e120b36b7eb012896481f5102f8cf3d9ec1c03775",
"head_block_id": "000009cfc8a2adf575d78218b28695615bdb6724a6e40359f96c9e1395386b14",
"head_block_time": "2018-08-01T06:42:39.500",
"head_block_producer": "eosio",
"virtual_block_cpu_limit": 2458387,
"virtual_block_net_limit": 12913257,
"block_cpu_limit": 199900,
"block_net_limit": 1048576
}
More in-depth documentation for the example app with additional commands can be found here: https://github.com/EOSIO/eosio-project-boilerplate-simple
cleos is a command line interface to interact with the blockchain and to manage wallets.
For convenience we will create a bash alias for cleos running inside our container. In terminal, run:
alias cleos='docker exec eosio_notechain_container /opt/eosio/bin/cleos -u http://localhost:8888'Now try to run cleos --help in your Terminal. You should see a following output:
Command Line Interface to EOSIO Client
Usage: /opt/eosio/bin/cleos [OPTIONS] SUBCOMMAND
Options:
-h,--help Print this help message and exit
-u,--url TEXT=http://127.0.0.1:8888/
the http/https URL where nodeos is running
--wallet-url TEXT=http://127.0.0.1:8900/
the http/https URL where keosd is running
-r,--header pass specific HTTP header; repeat this option to pass multiple headers
-n,--no-verify don't verify peer certificate when using HTTPS
-v,--verbose output verbose actions on error
--print-request print HTTP request to STDERR
--print-response print HTTP response to STDERR
Subcommands:
version Retrieve version information
create Create various items, on and off the blockchain
get Retrieve various items and information from the blockchain
set Set or update blockchain state
transfer Transfer EOS from account to account
net Interact with local p2p network connections
wallet Interact with local wallet
sign Sign a transaction
push Push arbitrary transactions to the blockchain
multisig Multisig contract commands
sudo Sudo contract commands
system Send eosio.system contract action to the blockchain.
More on cleos you can read here: https://developers.eos.io/eosio-nodeos/docs/cleos-overview
Before getting to the next section, please also read https://developers.eos.io/eosio-nodeos/docs/accounts-and-permissions to familiarize yourself with the concepts of accounts, wallets and permissions in EOSIO.
The wallet can be thought of as a repository of public-private key pairs. These are needed to sign operations performed on the blockchain. Wallets and their content are managed by keosd. Wallets are accessed using cleos.
Let's create our first wallet:
cleos wallet create --to-consoleThe output of this command will give you a password. Save this password - we will need it later.
To work with a wallet we need to open and unlock it:
cleos wallet open
cleos wallet unlock --password YOURPASSWORDWhere YOURPASSWORD is a password generated from the create command.
Create active and owner keys:
cleos create key --to-console
cleos create key --to-consoleBy labeling our new keys as follows, you’ll be a lot less likely to get the keys mixed up as you develop (just save it somewhere safe):
eosio Private key: 5KXuzu7QPjjEpTf22TvZ9ojQKjo1JVhfL5Lv6kSBX3v79GL5SL2
eosio Public key: EOS5UJuKQbmfzizeDXNikPbeCwYBpAq1vUUBuf7seJEpCoLzaUt4k
eosio Private key: 5JMa3mqbxn3WQDRCQZPVD3ny25pxydmwUYrC1MMDLU3Hn1d4vTk
eosio Public key: EOS6eY64pnpSZn2jQSPzs9X56j2JJbbe7sSDxL1PwwvwYytb9ETFuNow lets import private keys into our wallet:
cleos wallet import --private-key 5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3
cleos wallet import --private-key 5JKrSzsuztAPvTzghi9VU4522sT49SeE3XVHbB8HsfC3ikifJRfNow lets check the wallet is there:
cleos wallet listThe output should be following:
Wallets:
[
"default *",
"eosiomain",
"notechainwal"
]
The * shows which wallets are open.
And that keys are imported in the wallet:
cleos wallet list keysWith the successful output:
Wallets:
[
"default *",
"eosiomain",
"notechainwal"
]
[
"EOS7tLC1C4GPoU9rNW16zZFPpRf5887J2mfRTB8hWGQz1LVsyrBRW"
]
Awesome! You are up and running.
Now lets create some user accounts.
Each account should have a Private key. Think of it as both login and password for your EOSIO account.
Generate key pairs first:
cleos create key --to-console
cleos create key --to-consoleSave the keys in a separate file. We will need them later.
testacc owner Public Key: "EOS6MRyAjQq8ud7hVNYcfnVPJqcVpscN5So8BhtHuGYqET5GDW5CV",
testacc owner Private Key: "5KQwrPbwdL6PhXujxW37FSSQZ1JiwsST4cqQzDeyXtP79zkvFD3"
testacc active Public Key: "EOS7EzCEh94uN2k59wznzsZDcFVnpZ3wuiYvPSbb8bXDS6U7twKQF",
testacc active Private Key: "5JKrSzsuztAPvTzghi9VU4522sT49SeE3XVHbB8HsfC3ikifJRf"
Now let's import the keys in the wallet:
cleos wallet import --private-key PRIVATEKEYOWNER
cleos wallet import --private-key PRIVATEKEYACTIVETo create a new account we need to open the eosiomain wallet and then run a cleos command:
cleos create account eosio testacc pubkey1 pubkey2
cleos get account testacc -jNow it's time to create your first smart contract!
The folder where you should store your smart contracts is following:
cd ~/eosio-project-boilerplate-simple/eosio_docker/contractsWe need to create a new folder for our example contract.
mkdir example
cd example
touch example.cpp
subl ./example.cppOur example contract will be very simple. It will take a username as an argument and will publish a "Hello, username" message to the blockchain. It's quite useless, but good for a demo. We hope your smart contracts will be more sophisticated :)
Open example.cpp file in your editor and paste following code:
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>
using namespace eosio;
class [[eosio::contract]] example : public contract {
public:
using contract::contract;
[[eosio::action]]
void hi( name user ) {
print( "Hello, ", name{user});
}
};
EOSIO_DISPATCH( example, (hi))
Let's break this contract apart in parts.
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>This imports standard eosio c++ libraries. More libraries can be found in eosiolib folder.
EOSIO contracts extend the contract class. Initialize our parent contract class with the code name of the contract and the receiver. The important parameter here is the code parameter which is the account on the blockchain that the contract is being deployed to.
class hello : public contract {
public:
using contract::contract;
[[eosio::action]]
void hi( name user ) {
print( "Hello, ", name{user});
}
};This is a standard implementation of a contract structure that has one method called hi that takes a user parameter of type name. Then it prints out a name of this user.
EOSIO_DISPATCH( example, (hi))This line exposes the method hi to the ABI file. ABI file is like an address book that shows what are the methods and what are their parameters inside smart contract that can be called by your app.
EOSIO.CDT is a toolchain for WebAssembly (WASM) and set of tools to facilitate contract writing and compilation for the EOSIO platform.
EOSIO.CDT currently supports Mac OS X brew, Linux x86_64 Debian packages, and Linux x86_64 RPM packages.
If you have previously installed EOSIO.CDT, please run the uninstall script (it is in the directory where you cloned EOSIO.CDT) before downloading and using the binary releases.
$ brew tap eosio/eosio.cdt
$ brew install https://raw.githubusercontent.com/EOSIO/homebrew-eosio.cdt/50f00447765854f6e4e3b2d4ef36324cc38e5362/eosio.cdt.rb For more installation options for other systems please follow a guide here: https://github.com/EOSIO/eosio.cdt/blob/master/README.md
First we need to generate a WASM file. A WASM file is a compiled smart contract ready to be uploded to EOSIO network.
eosio-cpp is the WASM compiler and an ABI generator utility. Before uploading the smart contract to the network we need to compile it from C++ to WASM.
eosio-cpp -o ~/eosio-project-boilerplate-simple/eosio_docker/contracts/example/example.wasm ~/eosio-project-boilerplate-simple/eosio_docker/contracts/example/example.cpp --abigen --contract example
Now in the folder `` you will see three files:
example.cpp # this is source code of the example contract
example.abi # this is the ABI file - public interface in the smart contract
example.wasm # this is the compiled WASM fileCongratulations! You have created your first smart contract! Lets upload this contract to the blockchain:
cleos set contract testacc /opt/eosio/bin/contracts/example/ --permission testacc@activeRun the transaction:
cleos push action testacc hi '["testacc"]' -p testacc@activeNow let's get real and create a custom token. With EOSIO it's easy!
First, we need to create an account for currency system contract:
cleos create key --to-console
cleos create key --to-console
cleos wallet import --private-key **PRIVATEKEY1**
cleos wallet import --private-key **PRIVATEKEY2**
cleos create account eosio eosio.token **PUBLICKEY1** **PUBLICKEY2**Then we need to upload the smart contract:
cleos set contract eosio.token /contracts/eosio.token -p eosio.tokenOnce that done, we can issue new token!
cleos push action eosio.token create '{"issuer":"eosio", "maximum_supply":"1000000000.0000 HAK"}' -p eosio.token@activeThis command created a new token HAK with a precision of 4 decimals and a maximum supply of 1000000000.0000 HAK.
In order to create this token we required the permission of the eosio.token contract because it "owns" the symbol namespace (e.g. "HAK"). Future versions of this contract may allow other parties to buy symbol names automatically. For this reason we must pass -p eosio.token to authorize this call.
Now that we have created the token, the issuer can issue new tokens to the account user we created earlier.
We will use the positional calling convention (vs named args).
cleos push action eosio.token issue '[ "testacc", "100.0000 HAK", "memo" ]' -p eosio
This time the output contains several different actions: one issue and three transfers. While the only action we signed was issue, the issue action performed an "inline transfer" and the "inline transfer" notified the sender and receiver accounts. The output indicates all of the action handlers that were called, the order they were called in, and whether or not any output was generated by the action.
Technically, the eosio.token contract could have skipped the inline transfer and opted to just modify the balances directly. However, in this case, the eosio.token contract is following our token convention that requires that all account balances be derivable by the sum of the transfer actions that reference them. It also requires that the sender and receiver of funds be notified so they can automate handling deposits and withdrawals.
Let's check testacc's balance:
cleos get table eosio.token testacc accountsYou should see following output:
{
"rows": [{
"balance": "100.0000 HAK"
}
],
"more": false
}Now, let's send some tokens to another user!
cleos push action eosio.token transfer '[ "testacc", "eosio", "25.0000 HAK", "m" ]' -p testacc@activeNailed it! Let's check the balance is correct:
cleos get table eosio.token eosio accountsShould give you:
{
"rows": [{
"balance": "25.0000 HAK"
}
],
"more": false
}cleos get table eosio.token testacc accountsShould give you:
{
"rows": [{
"balance": "75.0000 HAK"
}
],
"more": false
}Awesome! Let's move to the next part.
Great, now we want to store our information in a table-like structure, similar to a database.
Let's imagine we are building an address book where users can add their social security number, age and name.
First, create a folder in your work folder that will contain the contract files.
cd ~/eosio-project-boilerplate-simple/eosio_docker/contracts
mkdir addressbook
cd addressbookAnd create a new .cpp file:
touch addressbook.cpp
subl ./addressbook.cppLet's create a standard structure for a contract file:
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>
using namespace eosio;
class addressbook : public eosio::contract {
public:
private:
};Before a table can be configured and instantiated, a struct that represents the data structure of the address book needs to be written. Think of this as a "schema." Since it's an address book, the table will contain people, so create a struct called "person"
struct person {};When defining the schema for a multi_index table, you will require a unique value to use as the primary key.
For this contract, use a field called "key" with type name. This contract will have one unique entry per user, so this key will be a consistent and guaranteed unique value based on the user's name.
struct person {
name key;
};Since this contract is an address book it probably should store some relevant details for each entry or person.
struct person {
name key;
std::string full_name;
std::string street;
std::string city;
uint32_t phone;
};Great. The basic schema is now complete. Next, define a primary_key method, which will be used by multi_index iterators. Every multi_index schema requires a primary key. To accomplish this you simply create a method called primary_key() and return a value, in this case, the key member as defined in the struct.
struct person {
name key;
std::string full_name;
std::string street;
std::string city;
uint32_t phone;
uint64_t primary_key() const { return key.value;}
};Note: A table's schema cannot be modified while it has data in it. If you need to make changes to a table's schema in any way, you first need to remove all its rows
Add the struct in private as a private field:
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>
class addressbook : public eosio::contract {
public:
using contract::contract;
private:
struct person {
name key;
std::string full_name;
std::string street;
std::string city;
uint32_t phone;
uint64_t primary_key() const { return key.value;}
};
};Now that the schema of the table has been defined with a struct we need to configure the table. The eosio::multi_index constructor needs to be named and configured to use the struct we previously defined.
// We setup the table usin multi_index container:
typedef eosio::multi_index<"people"_n, person> addressbook_type;We need to initialize the class in the constructor.
// We inititialize the class with a constructor and we pass the name as a parameter in the constructor
// this name will be set to the account that deploys the contract
addressbook(name receiver, name code, datastream<const char*> ds):contract(receiver, code, ds) {}Let's sum it all up in one file so far:
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>
class addressbook : public eosio::contract
{
public:
using contract::contract;
addressbook(name receiver, name code, datastream<const char *> ds) : contract(receiver, code, ds) {}
private:
struct person
{
name key;
std::string full_name;
std::string street;
std::string city;
uint32_t phone;
uint64_t primary_key() const { return key.value; }
};
typedef eosio::multi_index<"people"_n, person> addressbook_type;
}; Next, define an action for the user to add or update a record. This action will need to accept any values that this action needs to be able to emplace (create) or modify.
void upsert(name user, std::string full_name, std::string street, std::string city, uint32_t phone) {
}Earlier, it was mentioned that only the user has control over their own record, as this contract is opt-in. To do this, utilize the require_auth method provided by the eosio.cdt. This method accepts one argument, an name type, and asserts that the account executing the transaction equals the provided value.
void upsert(name user, std::string full_name, std::string street, std::string city, uint32_t phone) {
require_auth( user );
}Instantiate the table. Previously, a multi_index table was configured, and declared it as addressbook_type . To instantiate a table, consider its two required arguments:
- The
"code", which represents the contract's account. This value is accessible through the scoped_codevariable. - The
"scope"which make sure the uniqueness of the contract. In this case, since we only have one table we can use"_code"as well. Important to notice, we are passing_code.valuethat returns_codeinunit64_tas that is whatscoperequires.
void upsert(name user, std::string full_name, std::string street, std::string city, uint32_t phone) {
require_auth( user );
addressbook_type addresses(_code, _code.value);
}Next, query the iterator, setting it to a variable since this iterator will be used several times.
void upsert(name user, std::string full_name, std::string street, std::string city, uint32_t phone) {
require_auth( user );
eosio_assert(full_name.size() <= 30, "Full name is too long");
eosio_assert(street.size() <= 30, "Street name is too long");
eosio_assert(city.size() <= 20, "City name is too long");
addressbook_type addresses(_code, _code.value);
auto iterator = addresses.find(user.value);
}Now our function needs to actually add or update the record (if it already exists) in the table:
if( iterator == addresses.end() )
{
//The user isn't in the table
}
else {
//The user is in the table
}If the record doesn't exist, we need to create it. We will use an emplace method to do it:
addresses.emplace(user, [&]( auto& row ) {
row.key = user;
row.full_name = full_name;
row.street = street;
row.city = city;
row.phone = phone;
});If it already exists - we will update it using modify method:
addresses.modify(iterator, user, [&]( auto& row ) {
row.key = user;
row.full_name = full_name;
row.street = street;
row.city = city;
row.phone = phone
});Let's put it all together:
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>
class addressbook : public eosio::contract
{
public:
using contract::contract;
addressbook(name receiver, name code, datastream<const char *> ds) : contract(receiver, code, ds) {}
void upsert(name user, std::string full_name, std::string street, std::string city, uint32_t phone)
{
require_auth(user);
eosio_assert(full_name.size() <= 30, "Full name is too long");
eosio_assert(street.size() <= 30, "Street name is too long");
eosio_assert(city.size() <= 20, "City name is too long");
addressbook_type addresses(_code, _code.value);
auto iterator = addresses.find(user.value);
if (iterator == addresses.end())
{
//The user isn't in the table
addresses.emplace(user, [&](auto &row) {
row.key = user;
row.full_name = full_name;
row.street = street;
row.city = city;
row.phone = phone;
});
}
else
{
//The user is in the table
addresses.modify(iterator, user, [&](auto &row) {
row.key = user;
row.full_name = full_name;
row.street = street;
row.city = city;
row.phone = phone;
});
}
}
private:
struct person
{
name key;
std::string full_name;
std::string street;
std::string city;
uint32_t phone;
uint64_t primary_key() const { return key.value; }
};
typedef eosio::multi_index<"people"_n, person> addressbook_type;
We also may want to add the erase method. Please remember it doesn't remove the record from the history, but removes it from the current state of the database, freeing resources if you are on a resource-limited network.
void erase(name user) {
require_auth(user);
addressbook_type addresses(_code, _code.value);
auto iterator = addresses.find(user.value);
eosio_assert(iterator != addresses.end(), "Record does not exist");
addresses.erase(iterator);
}The contract is now mostly complete. Users can create, modify and erase records. However, the contract is not quite ready to be compiled.
At the bottom of the file, utilize the EOSIO_DISPATCH macro, passing the name of the contract, and our lone action "upsert".
This macro handles the apply handlers used by wasm to dispatch calls to specific methods in our contract.
Adding the following to the bottom of addressbook.cpp will make our cpp file compatible with EOSIO's wasm interpreter. Failing to include this declaration may result in an error when deploying the contract.
EOSIO_DISPATCH( addressbook, (upsert)(erase))eosio.cdt includes an ABI Generator, but for it to work will require some minor declarations to our contract.
There are three main types of the ABI annotation that you need to use in order for the ABI Generator to recognise relevant functions and export them to the ABI file correctly:
[[eosio::contract]] # This annotation is needed at the contract class definition
[[eosio::action]] # This annotation is needed on the publicly available functions
[[eosio::table]] # This annotation is needed for the multi index table structsThe final version of our file will look like this:
#include <eosiolib/eosio.hpp>
#include <eosiolib/print.hpp>
using namespace eosio;
class [[eosio::contract]] addressbook : public eosio::contract {
public:
using contract::contract;
addressbook(name receiver, name code, datastream<const char*> ds): contract(receiver, code, ds) {}
[[eosio::action]]
void upsert(name user, std::string full_name, std::string street, std::string city, uint32_t phone) {
require_auth( user );
addressbook_type addresses(_code, _code.value);
auto iterator = addresses.find(user.value);
if( iterator == addresses.end() )
{
addresses.emplace(user, [&]( auto& row ) {
row.key = user;
row.full_name = full_name;
row.street = street;
row.city = city;
row.phone = phone;
});
}
else {
std::string changes;
addresses.modify(iterator, user, [&]( auto& row ) {
row.key = user;
row.full_name = full_name;
row.street = street;
row.city = city;
row.phone = phone;
});
}
}
[[eosio::action]]
void erase(name user) {
require_auth(user);
addressbook_type addresses(_self, _code.value);
auto iterator = addresses.find(user.value);
eosio_assert(iterator != addresses.end(), "Record does not exist");
addresses.erase(iterator);
}
private:
struct [[eosio::table]] person {
name key;
std::string full_name;
std::string street;
std::string city;
uint32_t phone;
uint64_t primary_key() const { return key.value; }
};
typedef eosio::multi_index<"people"_n, person> addressbook_type;
};
EOSIO_DISPATCH( addressbook, (upsert)(erase))Awesome, we have our table! Let's test it now.
First, we need to create couple of accounts:
# This account will be a user who wants to add their contact details to the address book
cleos create key --to-console
cleos create key --to-console
cleos wallet import --private-key **PRIVATEKEY1**
cleos wallet import --private-key **PRIVATEKEY2**
cleos create account eosio khaled **PUBLICKEY1** **PUBLICKEY2**
# This account will be used to store the smart contract for the address book
cleos create key --to-console
cleos create key --to-console
cleos wallet import --private-key **PRIVATEKEY3**
cleos wallet import --private-key **PRIVATEKEY4**
cleos create account eosio addressbook **PUBLICKEY3** **PUBLICKEY4**Now we need to compile and upload the smart contract:
eosio-cpp -o ~/eosio-project-boilerplate-simple/eosio_docker/contracts/addressbook/addressbook.wasm ~/eosio-project-boilerplate-simple/eosio_docker/contracts/addressbook/addressbook.cpp --abigen --contract addressbook
# notice we are using the path to the contract inside the container, not the local path
cleos set contract addressbook /opt/eosio/bin/contracts/addressbook -p addressbook@activeAnd let's add khaled to the database:
cleos push action addressbook upsert '["khaled", "Khaled A", "Springfield St", "San Francisco, CA", 123456]' -p khaledLooks good! Is Khaled in?
cleos get table addressbook addressbook peopleThe result should look like this:
{
"rows": [{
"key": "khaled",
"full_name": "Khaled A",
"street": "Springfield St",
"city": "San Francisco, CA",
"phone": 123456
}
],
"more": false
}What if we now need to update the first name?
cleos push action addressbook upsert '["khaled", "Khaled A", "Market St", "San Francisco, CA", 123456]' -p khaledYou should get the following result by repeating the last cleos command:
{
"rows": [{
"key": "khaled",
"full_name": "Khaled A",
"street": "Market St",
"city": "San Francisco, CA",
"phone": 123456
}
],
"more": false
}Congrats, all done!