EVA-3D · P-C-R · Jul 8, 2021 · Jul 8, 2021 · Jul 8, 2021 · Jul 8, 2021
diff --git a/docs/extruders/LGX_mini/LGX_Lite_EVA-LGX_MINI_BRACKET.stl b/docs/extruders/LGX_mini/LGX_Lite_EVA-LGX_MINI_BRACKET.stl
diff --git a/docs/extruders/LGX_mini/LGX_Lite_EVA-MGN12_Base.stl b/docs/extruders/LGX_mini/LGX_Lite_EVA-MGN12_Base.stl
diff --git a/docs/extruders/LGX_mini/LGX_Lite_EVA.step b/docs/extruders/LGX_mini/LGX_Lite_EVA.step
diff --git a/docs/extruders/LGX_mini/LGX_mini_eva.png b/docs/extruders/LGX_mini/LGX_mini_eva.png
diff --git a/docs/extruders/LGX_mini/README.md b/docs/extruders/LGX_mini/README.md
@@ -0,0 +1,18 @@
+# Mount fot the LGX Mini
+## WiP not tested.
+
+
+You need
+
+* M3 Inserts 3mm short.
+* 3x M3x4mm screws
+* 4x M3x6mm screw
+
+
+the MGN12 Piece has Pins to align the Mini. Easier printing if you remove the Pins. You can do it with the slicer
+I am printing with supports. So the pins are no problem
+
+<p align="center">
+  <img width="360" height="300" src="https://github.com/P-C-R/contrib-extras/raw/LGX_mini/docs/extruders/LGX_mini/LGX_mini_eva.png">
+</p>
+
diff --git a/docs/extruders/sherpa_mini_2_3/IMG/1.jpg b/docs/extruders/sherpa_mini_2_3/IMG/1.jpg
diff --git a/docs/extruders/sherpa_mini_2_3/IMG/2.jpg b/docs/extruders/sherpa_mini_2_3/IMG/2.jpg
diff --git a/docs/extruders/sherpa_mini_2_3/IMG/3.jpg b/docs/extruders/sherpa_mini_2_3/IMG/3.jpg
diff --git a/docs/extruders/sherpa_mini_2_3/IMG/README.md b/docs/extruders/sherpa_mini_2_3/IMG/README.md
@@ -0,0 +1 @@
+
diff --git a/docs/extruders/sherpa_mini_2_3/README.md b/docs/extruders/sherpa_mini_2_3/README.md
@@ -0,0 +1,20 @@
+# Sherpa Mini Mount for EVA 2.3
+You will need
+
+* 2x M3x12 Socket Screw
+* 2x M3x6 Socket Screw
+* 4x M3x5 Heat Insert
+
+.Step and .stl included. You have to print the main mount upside down with supports for the slot holes
+
+<p align="center">
+  <img width="460" height="300" src="https://raw.githubusercontent.com/P-C-R/contrib-extras/main/docs/extruders/sherpa_mini_2_3/IMG/1.jpg">
+</p>
+
+<p align="center">
+  <img width="460" height="300" src="https://raw.githubusercontent.com/P-C-R/contrib-extras/main/docs/extruders/sherpa_mini_2_3/IMG/2.jpg">
+</p>
+
+<p align="center">
+  <img width="460" height="300" src="https://raw.githubusercontent.com/P-C-R/contrib-extras/main/docs/extruders/sherpa_mini_2_3/IMG/3.jpg">
+</p>
diff --git a/docs/extruders/sherpa_mini_2_3/STEP/README.md b/docs/extruders/sherpa_mini_2_3/STEP/README.md
@@ -0,0 +1 @@
+