Replies: 25 comments 114 replies
-
|
Hi, @calebdw, If you have any queries files, etc. for indent in your environment, it would be helpful to share the information. |
Beta Was this translation helpful? Give feedback.
-
|
Here is my setup FiletypesI don't like using vim commands in my lua configs so if I set up an autocommand then I'll use the lua api, however in this case I just use the filetype api: -- in my settings
-- Filetypes --
vim.filetype.add({
pattern = {
['.*%.blade%.php'] = 'blade',
},
})QueriesHighlights: (directive) @tag
(directive_start) @tag
(directive_end) @tag
(bracket) @tag.delimiter
(comment) @comment @spellInjections (note that some of these are for node that don't exist in master): ((content) @injection.content
(#set! injection.language "html")
(#set! injection.combined))
((php) @injection.content
(#set! injection.language "php")
(#set! injection.combined))
((parameter) @injection.content
(#set! injection.language php))AlpineJS InjectionsFor AlpineJS I've extended the
;; extends
; AlpineJS attributes
(attribute
(attribute_name) @_attr
(#lua-match? @_attr "^x%-%l")
(quoted_attribute_value
(attribute_value) @injection.content)
(#set! injection.language "javascript")) |
Beta Was this translation helpful? Give feedback.
-
|
Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
can you guys share the repos that you have for neovim? that would be really helpful |
Beta Was this translation helpful? Give feedback.
-
|
@vivere-dally, you can take a look at my dotfiles below---sorry it took so long to make them public: |
Beta Was this translation helpful? Give feedback.
-
|
Is it possible to enable jumping between html tags using % in a blade file? |
Beta Was this translation helpful? Give feedback.
-
|
Hi @yaegassy! Thank you for the detailed instructions! I have actually had a few feedbacks from Nvim users asking for help with regards to setting up I am sure this will be extremely useful so I will put a link on a README.md pointing to this discussion for all Neovim users. 😊 I have two questions:
|
Beta Was this translation helpful? Give feedback.
-
|
@EmranMR, yes we should after we standardize the highlights/injections/indents/folds etc. (i.e., come up with sane defaults) |
Beta Was this translation helpful? Give feedback.
-
|
The blade.php instructions are the same, it's just that I use lua instead of vim commands. I will add the sql injection stuff I got to work today next week as that's on my work computer. Gotta get a pull request in for nvim-treesitter at some point so we can just do TSInstall blade without the manual setup. |
Beta Was this translation helpful? Give feedback.
-
|
@unansweredocd, it would probably be better to hold off on an nvim-treesitter PR until this parser is more stable |
Beta Was this translation helpful? Give feedback.
-
|
Eh you're probably right. Glad all the neovim folks that are using this are finding this though. |
Beta Was this translation helpful? Give feedback.
-
|
I just figured that sql is probably not in your blade files, but maybe this helps you guys anyway since it's also php and all. This injection makes it so that sql that's within the insert statement is highlighted as sql.
(scoped_call_expression
scope: (name) @scope (#eq? @scope "DB")
name: (name) @name (#any-of? @name "insert" "select")
(arguments
(argument
(string
((string_value) @injection.content
(#set! injection.language sql)
)
)
)
)
) |
Beta Was this translation helpful? Give feedback.
-
|
Hey, @yaegassy and @calebdw ! I've set up the blade filetype and created the queries ( similar as yaegassy ) as you guys posted. But now only the blade directives from the blade parser are being highlighted and the html ( marked as a php node ) isn't. Should I change any configuration of the php parser for it to attach to the blade files too? I'm not pretty sure of what to do. |
Beta Was this translation helpful? Give feedback.
-
|
The html/php injection needs to some work |
Beta Was this translation helpful? Give feedback.
-
|
So I should make the html and php parser attach to blade files? |
Beta Was this translation helpful? Give feedback.
-
|
Hello, I'm facing similar issue, but I don't know on making html and php parser to attach blade files, I know this is nubby question, but I'm still new at configure Neovim. I'm using kickstart.nvim as a base configuration I follow instruction, and found out that this is causing an error, and I'm not sure what to do or did I miss something |
Beta Was this translation helpful? Give feedback.
-
|
I'm in the same boat as @UnknownRori. It would be great if any of you could share their nvim repos, or a more comprehensive step by step guide than anyone with not as much nvim knowledge could follow. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @UnknownRori @vivere-dally you can get the html injection working using the stubs here in the queries folder. This discussion was created very early on and there has been some name changes for technical reasons. Most of the other instructions should work fine! 👍 There is also a guide in the README ((php) @injection.content
(#set! injection.combined)
(#set! injection.language php))
; Below is not supported yet but you can probably fix it👍
;((php_only) @injection.content
; (#set! injection.combined)
; (#set! injection.language php_only))
; directive parameters
;((parameter) @injection.content
; (#set! injection.language php_only))Please note, that will ONLY take care of the For php_only injection it's a bit hacky, however I managed to get it working for Nova editor using this fork of the |
Beta Was this translation helpful? Give feedback.
-
|
It would be great if someone could add the Lua installation guide. |
Beta Was this translation helpful? Give feedback.
-
|
for anyone using nvchad with lazy, I got it working by extending {
"nvim-treesitter/nvim-treesitter",
init = function()
require("core.utils").lazy_load "nvim-treesitter"
end,
cmd = { "TSInstall", "TSBufEnable", "TSBufDisable", "TSModuleInfo" },
build = ":TSUpdate",
opts = function()
return require "plugins.configs.treesitter"
end,
config = function(_, opts)
dofile(vim.g.base46_cache .. "syntax")
require("nvim-treesitter.configs").setup(opts)
local parser_config = require("nvim-treesitter.parsers").get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = {"src/parser.c"},
branch = "main",
},
filetype = "blade"
}
end,
},Solution is not ideal since this file is part of nvchads install, I haven't had time to try to play around and move it to the custom part of config. The filetype pattern, I've just added to vim.filetype.add({
pattern = {
['.*%.blade%.php'] = 'blade',
},
})Don't forget to add all the |
Beta Was this translation helpful? Give feedback.
-
|
@bogmater woud you mind sharing your neovim config? I'm still struggling with this setup |
Beta Was this translation helpful? Give feedback.
-
|
I got it working on my config in Linux but when using it on Mac, highlighting doesn't work, here's my config |
Beta Was this translation helpful? Give feedback.
-
|
I'm sorry, apparently I had to register the query after I read the first thread carefully again |
Beta Was this translation helpful? Give feedback.
-
|
@bogmater I'm using directly LazyVim that is similar to NVChad in using lazy.nvim. If I use your code it extends normal treesitter plugin definition or it substitutes it? |
Beta Was this translation helpful? Give feedback.
-
|
Could someone help me out I am out of touch with this tree-sitter stuff and all I want is somewhat good blade support, I followed the instructions on your post and got this only, as you can see only about 10% of the file is highlighted.
|
Beta Was this translation helpful? Give feedback.
-
|
Did you run Mine was just looks like that until I figured out I need to run a command
|
Beta Was this translation helpful? Give feedback.
-
|
Yes I did, I see you have your config on github so I'll try that as a last resort. |
Beta Was this translation helpful? Give feedback.
-
|
Hi @spcbfr , did you forgot to add Queries Injections and Highlights? it's seem the injection has been fixed too. |
Beta Was this translation helpful? Give feedback.
-
|
@UnknownRori I figured it out: turns out I put the following piece of code at the top-level of my config: local parser_config = require "nvim-treesitter.parsers".get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = {"src/parser.c"},
branch = "main",
},
filetype = "blade"
}
vim.filetype.add({
pattern = {
['.*%.blade%.php'] = 'blade',
}
})
require(plug.main).setup(config);When in reality it should be inside the config option/closure of the nvim-treesitter plugin like so: config = function(plug, config)
local parser_config = require "nvim-treesitter.parsers".get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = {"src/parser.c"},
branch = "main",
},
filetype = "blade"
}
vim.filetype.add({
pattern = {
['.*%.blade%.php'] = 'blade',
}
})
require(plug.main).setup(config);
end, |
Beta Was this translation helpful? Give feedback.
-
|
I'm encountering an issue while attempting to integrate Treesitter for Blade syntax highlighting in my project. I've added the necessary code to my plugins/treesitter.lua file for Treesitter to recognize Blade. Additionally, I've created the appropriate queries in blade/highlights.scm and blade/injections.scm. However, when I run the command I've reviewed my code, but I can't seem to identify the root cause of this error. I would appreciate any assistance or insights to help me resolve this issue. Here's a snippet of my code for reference: -- Relevant code from plugins/treesitter.lua -- Relevant code from blade/highlights.scm -- Relevant code from blade/injections.scm If anyone has experience with this or has encountered a similar issue, your guidance would be greatly appreciated. Thank you! The full error is: |
Beta Was this translation helpful? Give feedback.
-
|
Hi @adoolaard, It appears that Please change to this content and try it. |
Beta Was this translation helpful? Give feedback.
-
|
@yaegassy Thanks a lot! I finally have some highlighting in my blade files now. So today I learned to always check the newest documentation :) |
Beta Was this translation helpful? Give feedback.
-
|
Hi there, using this ((text) @injection.content
(#not-has-ancestor? @injection.content "envoy")
(#set! injection.combined)
(#set! injection.language php))On this code: <div class="photo">
@if ($photo->extension == '.pdf')
@foreach ($photo->urls as $url)
<img src="{{ $url }}" alt="pdf page">
@endforeach
@endif
</div>Running :InspectTree it shows a tree twice, the first one with errors, the second one all ok. Any clues how to fix it? |
Beta Was this translation helpful? Give feedback.
-
|
The errors are coming from the |
Beta Was this translation helpful? Give feedback.
-
|
@EmranMR, I suspect blade's |
Beta Was this translation helpful? Give feedback.
-
|
Hi! I had been using tree-sitter-blade successfully for a few months. I recently switched from packer to lazy and am having troubles getting it configured. I am successfully getting neovim to recognize .blade.php files as 'blade' files, and after running I have my blade filetype set in my my my my I'm not sure if I'm missing something or have something configured improperly. |
Beta Was this translation helpful? Give feedback.
-
|
You also have to copy the queries to your neovim rtp (runtimepath) |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
That should work, I have mine under |
Beta Was this translation helpful? Give feedback.
-
|
@samgurung sorry for the late reply. Looks like @calebdw has you covered. My config is on a Mac machine so if it’s working on Mac for you I unfortunately don’t have much advice apart from what Caleb has already stated. Hopefully moving your queries directory out of the after directory and into the root directory helps. |
Beta Was this translation helpful? Give feedback.
-
|
@calebdw @curranConcepts please accept my profound apologies. I had a typo in my filename.. had injecttions ( double t). changed that and all good now. I feel like a complete idiot. but thank you so much for your time! |
Beta Was this translation helpful? Give feedback.
-
|
I get the following error when running TSInstall blade command Installation not possible: ...vim/lazy/nvim-treesitter/lua/nvim-treesitter/install.lua:86: Parser not available for language "blade"I have the following config return {
{
"nvim-treesitter/nvim-treesitter",
opts = {
ensure_installed = {
"php",
},
config = function(plug, config)
local parser_config = require("nvim-treesitter.parsers").get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = { "src/parser.c" },
branch = "main",
},
filetype = "blade",
}
vim.filetype.add({
pattern = {
[".*%.blade%.php"] = "blade",
},
})
end,
},
},
}Am I doing something wrong or missing anything @yaegassy ? |
Beta Was this translation helpful? Give feedback.
-
|
thank you very much it works now, for any one using LazyVim this is the final treesitter config return {
{
"nvim-treesitter/nvim-treesitter",
opts = {
ensure_installed = {
"html",
"php_only",
"php",
"bash",
},
},
config = function(_, opts)
local parser_config = require("nvim-treesitter.parsers").get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = { "src/parser.c" },
branch = "main",
},
filetype = "blade",
}
vim.filetype.add({
pattern = {
[".*%.blade%.php"] = "blade",
},
})
require("nvim-treesitter.configs").setup(opts)
end,
},
} |
Beta Was this translation helpful? Give feedback.
-
Not luck with me, blade file still back and white 😅 |
Beta Was this translation helpful? Give feedback.
-
|
You need to add |
Beta Was this translation helpful? Give feedback.
-
|
@calebdw return {
{
"nvim-treesitter/nvim-treesitter",
opts = {
ensure_installed = {
"bash", "html", "javascript", "json", "lua", "markdown", "markdown_inline", "python", "query", "regex", "tsx", "typescript", "vim", "yaml", "css", "c", "c_sharp", "cpp",
"php",
"blade",
},
},
config = function(_, opts)
local parser_config = require("nvim-treesitter.parsers").get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = { "src/parser.c" },
branch = "main",
},
filetype = "blade",
}
vim.filetype.add({
pattern = {
[".*%.blade%.php"] = "blade",
},
})
require("nvim-treesitter.configs").setup(opts)
end,
},
} |
Beta Was this translation helpful? Give feedback.
-
|
@vietlubu you need to run after that run restart neovim and you should be ready to go. Hope this helps |
Beta Was this translation helpful? Give feedback.
-
|
Hello, how do I add html textobjects to blade queries? I tried: ((content) @injection.content
(#set! injection.language "html")
(#set! injection.combined))But it raises an I'm trying to use html textobjects to delete inside tags, change tag attributes, etc. I can do that already for html files but not for blade files. |
Beta Was this translation helpful? Give feedback.
-
|
Should be able to do that automatically--- |
Beta Was this translation helpful? Give feedback.
-
|
Hi all, thank you for the amazing contributions! |
Beta Was this translation helpful? Give feedback.
-
|
That's an html lsp issue, probably need to enable it in blade files |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I was wondering if php inside my blade directive can/is supposed to be formatted? Formatting of html and the blade directives themselves is working great! For example: |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @calebdw, yes I meant highlighting (I guess formatting means something else - I will, however, check out the links you suggested) I had a go at adding php_only, without success, not 100% sure I know what I'm doing... I have treesitter php_only installed highlights.scm: and injections.scm: |
Beta Was this translation helpful? Give feedback.
-
|
Looks right to me, feel free to checkout my dotfiles for an example |
Beta Was this translation helpful? Give feedback.
-
|
I got it working! Thanks Working backwards from your dotfiles, commenting these lines from highlights.scm did the trick (I don't understand why) 
|
Beta Was this translation helpful? Give feedback.
-
|
Ah that makes sense, those regions are actually highlighted by the php_only injected grammar, but you overrode it with the priority setting |
Beta Was this translation helpful? Give feedback.
-
|
I followed this thread but I couldn't get mine highlighting like that
|
Beta Was this translation helpful? Give feedback.
-
|
Hey ✌ Thank you all so much for your work on this! I want to highlight nested blade components that include a dot. Can you please give me a hint how to achieve this? Thanks a bunch! If it helps this explains my problem pretty good in one picture (notice the 
|
Beta Was this translation helpful? Give feedback.
-
|
That would be with the If it's a highlight issue then would need a pr to nvim-treesitter as well which I can do |
Beta Was this translation helpful? Give feedback.
-
|
If you find the time this would help me a lot since I'm completely lost on this topic. I really appreciate your help on this! |
Beta Was this translation helpful? Give feedback.
-
|
So turn out that's a parsing error in html---tag names are not allowed to have The There's really nothing to do on the html grammar end... we might could rewrite the blade grammar to extend from the html grammar, and then we could allow this without having to repeat all of the html rules (there would be other benefits to this as well, such as packaging injection queries for AlpineJS, and the Blade JS/PHP attributes). |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for looking into this! And yeah, makes sense since |
Beta Was this translation helpful? Give feedback.
-
|
That will probably solve the issue with comment shortcuts provided by the editors as well which was discussed below, whereby HTML comments are triggered instead of blade. I have created an issue #62 for this as well. |
Beta Was this translation helpful? Give feedback.
-
|
how to make |
Beta Was this translation helpful? Give feedback.
-
|
Can't really say without knowing what plugin you're using under the hood. You might have to configure the comment type for blade files. If you're using treesitter based commenting then most of the time you're going to be in an html node and it will use an html comment. |
Beta Was this translation helpful? Give feedback.
-
|
Thank you for your help Here's my config |
Beta Was this translation helpful? Give feedback.
-
|
@ahmedsayedabdelsalam I had the same problem with Nova, so for the extension I created an alternate shortcut/snippet as a workaround for time being. I would actually like to know if this is the same case with NeoVim? The toggle works on an empty document, but once you are in the "html injected" region, it will do HTMl comment, which in all honesty, makes sense. Seems like an intended side effect! |
Beta Was this translation helpful? Give feedback.
-
|
Yes it's the same in neovim What is the other shortcut for making blade comment? |
Beta Was this translation helpful? Give feedback.
-
|
Mmm I am not a NeoVim user myself but here are the alternatives I went for, for the Nova Extension. I just didn't know what would be the best alternative so just added support for three options lol 🤷♂️ Hopefully the editor devs can come up with a solution, because tbh it is not the problem with the tree-sitter. Surely it would be possible to override the behaviour. Like prioritisation etc, for a specific syntax. You might be able to override the actual normal shortcut in NeoVim for |
Beta Was this translation helpful? Give feedback.
-
|
Wondering if anyone has has had any success configuring indentation and is willing to share their indents.scm file? |
Beta Was this translation helpful? Give feedback.
-
|
At the moment, indents are only possible in Nova (might not be the case with their new release), but planning to see if I can rewrite the grammar so that all other editors can take advantage as well, initial assessment proved it a bit trickier than I anticipated! However feel free to subscribe to #48 ! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @EmranMR, subscribed! |
Beta Was this translation helpful? Give feedback.
-
|
Hi, any one having this issue? It only shows the error when open any blade file from other php files. After some checking, seems like something to deal with lsp, phpactor. Once the phpactor lsp initiated, it started to complain highlight error. So if anyone also having this issue, here is an easy quick fix: -- your lsp setting file, mine lsp.lua
require("lspconfig").phpactor.setup({
filetypes = { "php", "blade" },
}) |
Beta Was this translation helpful? Give feedback.
-
|
Hello guys, print("Loading after/ftplugin/blade.lua")
vim.opt_local.expandtab = true
vim.opt_local.tabstop = 2
vim.opt_local.softtabstop = 2
vim.opt_local.shiftwidth = 2
print("Softtabstop: ", vim.opt_local.softtabstop:get())
print("tabstop: ", vim.opt_local.tabstop:get())
print("Shiftwidth: ", vim.opt_local.shiftwidth:get())The print value "2" are displayed correctly when I open a blade file. Here is my nvim-treesitter file (highlighting work great) : return {
"nvim-treesitter/nvim-treesitter", build = ":TSUpdate",
config = function ()
local configs = require("nvim-treesitter.configs")
-- blade syntaxe highlight
local parser_config = require("nvim-treesitter.parsers").get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = {"src/parser.c"},
branch = "main",
},
filetype = "blade"
}
configs.setup({
ensure_installed = {
"c", "lua", "vim", "vimdoc", "query", "org", "javascript", "html", "php",
"hlsl", "json", "http", "css", "scss", "typescript", "vala", "xml", "vue",
"blade",
},
-- Install parsers synchronously (only applied to `ensure_installed`)
sync_install = false,
-- Automatically install missing parsers when entering buffer
-- Recommendation: set to false if you don't have `tree-sitter` CLI installed locally
auto_install = true,
highlight = {
enable = true,
-- Required for spellcheck, some LaTex highlights and
-- code block highlights that do not have ts grammar
additional_vim_regex_highlighting = {"org"},
},
indent = {
enable = true,
},
})
vim.cmd [[
augroup BladeFiletypeRelated
autocmd!
autocmd BufNewFile,BufRead *.blade.php set ft=blade
augroup END
]]
-- Try to indent by 2 also here
vim.cmd [[
augroup BladeIndentation
autocmd!
autocmd FileType blade setlocal tabstop=2 shiftwidth=2 expandtab
augroup END
]]
end
}When I run the command But each time I run the command I have a If you have any ideas, I would be very grateful. |
Beta Was this translation helpful? Give feedback.
-
|
This is how I set the filetype: vim.filetype.add({
pattern =
['.*%.blade%.php'] = 'blade',
},
})And your file likely needs to be However, the easiest thing to do it to use a global / project root = true
[*]
charset = utf-8
end_of_line = lf
insert_final_newline = true
indent_style = space
indent_size = 4
trim_trailing_whitespace = true
[*.{yml,yaml,neon*,lua,scm,xml,md,blade.php}]
indent_size = 2 |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much @calebdw for your quick answer. I was thinking that "editorconfig" was an excellent idea, and you know what? I already had an editorconfig file created by Laravel, and it was indented to 4. You found my problem 😁 thank again ! |
Beta Was this translation helpful? Give feedback.
-
|
I'm suddenly not able to get highlights in blade file but only in php file. Does anyone have the same experience? M.config = function(_, opts)
require("nvim-treesitter.configs").setup(opts)
require("nvim-treesitter.parsers").get_parser_configs().blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = { "src/parser.c" },
branch = "main",
},
filetype = "blade",
}
vim.filetype.add({ pattern = { [".*%.blade%.php"] = "blade" } })
endPHP: M.setup = function(on_attach, capabilities)
local lspconfig = require("lspconfig")
local lsp_config = require("lspconfig.configs")
lspconfig.phpactor.setup({
on_attach = on_attach,
capabilities = capabilities,
filetypes = { "php", "blade" },
init_options = {
["language_server_phpstan.enabled"] = true,
["language_server_phpstan.level"] = "8",
},
})
-- Add custom blade lsp
lsp_config.blade_ls = {
default_config = {
name = "blade_ls",
cmd = { vim.fn.expand("$HOME/blade-lsp/builds/laravel-dev-tools"), "lsp" },
filetypes = { "blade" },
root_dir = function()
return vim.loop.cwd()
end,
settings = {},
},
}
-- Setup it
lspconfig.blade_ls.setup({
capabilities = capabilities,
})
end |
Beta Was this translation helpful? Give feedback.
-
|
Try moving your |
Beta Was this translation helpful? Give feedback.
-
|
It was a silly mistake while I refactoring my config. I passed opt instead of opts to treesitter. I guess tree-sitter-blade doesn't work with nvim treesitter with default opts like other langs? Anyway thank cablebdw for the suggestion. It made me look at treesitter config again. |
Beta Was this translation helpful? Give feedback.
-
|
@yaegassy Can you maybe add the suggestion from @calebdw to the main post? It took me an hour or so to figure out that I need to call setup() after the configuration. |
Beta Was this translation helpful? Give feedback.
-
|
Hi there, I want to consult about tree-sitter-blade on my neovim config. The configurations currently running on my machine can be found at this repository. I followed the instructions given in this discussion, and the current output I get when opening a
As you can see, it identifies the OS: WSL2 Ubuntu 22.04 LTS |
Beta Was this translation helpful? Give feedback.
-
|
Did you run |
Beta Was this translation helpful? Give feedback.
-
I did run the command, and it successfully installed as shown by my
I did think that was the problem and I tried moving my configuration to the Might take a look again when I get back. Thank you for the insights, @MarioAGR |
Beta Was this translation helpful? Give feedback.
-
|
Okay, I've tried moving the configuration from My dotfiles here has been updated with the recent updates used in this comment. |
Beta Was this translation helpful? Give feedback.
-
|
You also need to install the |
Beta Was this translation helpful? Give feedback.
-
|
Aha yes thank you so much @calebdw. I foolishly assumed that |
Beta Was this translation helpful? Give feedback.
-
|
HTML highlighting not working for me. I am using NVChad. This is my setup highlights injection This is the result |
Beta Was this translation helpful? Give feedback.
-
|
@V13Axel it seems like a similar problem I had to issue #41 ?, can you drop in your |
Beta Was this translation helpful? Give feedback.
-
|
Sure @EmranMR , I've just updated my whole config to the latest I'm running over at https://github.com/V13Axel/nvim-config - All of my injections are there if that helps? |
Beta Was this translation helpful? Give feedback.
-
|
ah @V13Axel, yea very likely it is related to #41 ! Basically the issue is due to the |
Beta Was this translation helpful? Give feedback.
-
|
@EmranMR that appears to have helped significantly! It seems to me that my only remaining trouble is the red However, on closer inspection, that seems like the HTML parser is
I dunno if that's something the Blade parser can/should manage to fix though? |
Beta Was this translation helpful? Give feedback.
-
|
@V13Axel can you please raise an issue with the smallest code excerpt that shows the problem? then I will have a look and we can follow up from there. |
Beta Was this translation helpful? Give feedback.
-
|
is their any way to setup format? |
Beta Was this translation helpful? Give feedback.
-
|
This has nothing to do with treesitter, but you can look into the following: |
Beta Was this translation helpful? Give feedback.
-
|
Just follow this https://medium.com/@jogarcia/laravel-blade-on-neovim-ee530ff5d20d |
Beta Was this translation helpful? Give feedback.
-
|
The article is missing the |
Beta Was this translation helpful? Give feedback.
-
|
but it works though |
Beta Was this translation helpful? Give feedback.
-
|
Hi! need help. My problems:
below is my -- import nvim-treesitter plugin safely
local status, treesitter = pcall(require, "nvim-treesitter.configs")
if not status then
return
end
-- configure treesitter
treesitter.setup({
-- enable syntax highlighting
highlight = {
enable = true,
},
-- enable indentation
indent = { enable = true },
-- enable autotagging (w/ nvim-ts-autotag plugin)
autotag = { enable = true },
-- ensure these language parsers are installed
ensure_installed = {
"json",
"javascript",
"typescript",
"tsx",
"yaml",
"html",
"css",
"php",
"blade",
"markdown",
"markdown_inline",
-- "lua",
"vim",
-- "dockerfile",
"gitignore",
},
-- auto install above language parsers
auto_install = true,
})
local parser_config = require("nvim-treesitter.parsers").get_parser_configs()
parser_config.blade = {
install_info = {
url = "https://github.com/EmranMR/tree-sitter-blade",
files = { "src/parser.c" },
branch = "main",
},
filetype = "blade",
}
vim.filetype.add({
pattern = {
[".*%.blade%.php"] = "blade",
},
})
below is my ((text) @injection.content
(#not-has-ancestor? @injection.content "envoy")
(#set! injection.combined)
(#set! injection.language php))
; tree-sitter-comment injection
; if available
((comment) @injection.content
(#set! injection.language "comment"))
; could be bash or zsh
; or whatever tree-sitter grammar you have.
((text) @injection.content
(#has-ancestor? @injection.content "envoy")
(#set! injection.combined)
(#set! injection.language bash))
((php_only) @injection.content
(#set! injection.language php_only))
((parameter) @injection.content
(#set! injection.include-children) ; You may need this, depending on your editor e.g Helix
(#set! injection.language "php-only")) below is my ((text) @injection.content
(#not-has-ancestor? @injection.content "envoy")
(#set! injection.combined)
(#set! injection.language php))
; tree-sitter-comment injection
; if available
((comment) @injection.content
(#set! injection.language "comment"))
; could be bash or zsh
; or whatever tree-sitter grammar you have.
((text) @injection.content
(#has-ancestor? @injection.content "envoy")
(#set! injection.combined)
(#set! injection.language bash))
((php_only) @injection.content
(#set! injection.language php_only))
((parameter) @injection.content
(#set! injection.include-children) ; You may need this, depending on your editor e.g Helix
(#set! injection.language "php-only")) |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
tnx for the info, ill add the emmet and try it |
Beta Was this translation helpful? Give feedback.
-
hey, I found your comment interesting. |
Beta Was this translation helpful? Give feedback.
-
|
I recommend you do some reading about tree-sitter and lsp. Your question is answered here: #72 (comment) |
Beta Was this translation helpful? Give feedback.
-
|
I do use tree-sitter for highlighting and lsp for intelligence, I would do further research if I found out if lsp can be triggered based on tree-sitter awareness. |
Beta Was this translation helpful? Give feedback.
-
|
tree-sitter has nothing to do with LSP. |
Beta Was this translation helpful? Give feedback.
-
|
I found that |
Beta Was this translation helpful? Give feedback.
and others
-
Overview
I created this discussion topic to share information on using tree-sitter-blade in Neovim (nvim-treesitter). I hope that the number of tree-sitter-blade users will increase, and that better feedback, pull requests, etc. will increase.
Installation of nvim-treesitter and addition of settings for tree-sitter-blade
First, please install nvim-treesitter. For more information, please click here. https://github.com/nvim-treesitter/nvim-treesitter
Add settings for tree-sitter-blade to init.vim
Install tree-sitter-blade. Execute
:TSInstall blade.Add queries file
Add queries files for highlighting, etc. queries files for blade are not currently bundled with nvim-treesitter and must be added manually.
Query file for highlights
Execute the following command. A file will be created in
~/.config/nvim/after/queries/blade/highlights.scm.:TSEditQuery highlights blade.Please write the following settings. The settings are examples only.
Example:
Query file for injections
Execute the following command. A file will be created in
~/.config/nvim/after/queries/blade/injections.scm.:TSEditQuery injections bladePlease write the following settings. The settings are examples only.
Example:
Misc
For indentation, you will need to add a queries file for indentation. Alternatively, you can install vim-blade for indentation.
Beta Was this translation helpful? Give feedback.
All reactions