Troubleshooting

For general troubleshooting, uploading the firmware, check Web Installer

The faps do not run.

I'd get a parse error, but now I get nothing. I can tell it to read the cartridge and it will just say "Loading" forever.

there might be a few factors that could be affecting things.

Which firmware and version are you using? Before sending, I tested the boards with last version of the Oficial Firmware.

• When you connect the board to the Flipper, do you see this image?

  

• Check that your Expansion Modules settings are correct. To do this, go to Settings > Expansion Modules, and ensure Listen UART is set to USART.

  

• If the above steps are complete, perform a reboot, and after the reboot, press the RST button on the board.

  

  Video Demo

  

• Also, try cleaning the cartridges—the old trick of a quick blow can be enough.

  

• Lastly, remember that game cartridges should always face forward, and the GB Camera should be positioned with the serial number facing forward.

  GB/GBC/GBA Cartridge	GB Camera/GB Pocket Camera

If the above steps didn’t resolve your issue, you can create a new issue on GitHub and provide detailed information about your problem:

Create a new issue