Skip to content

Latest commit

 

History

History
72 lines (49 loc) · 1.78 KB

README.md

File metadata and controls

72 lines (49 loc) · 1.78 KB
Raw

Jaguar_Sheffield

This ROS package is for Jaguar4x4 robot 2014 mode from Dr Robot Inc. The robot manual can be found here. This package also includes launch files to run our sensors.

Dependencies

Only install the ones required for your sensor

Network setup

Connecting to the robot

  • SSID: DriJaguar
  • Password: drrobotdrrobot
  • Assign this static IP to your device: 192.168.0.104
  • Netmask: 255.255.255.0

To test your connection: ping 192.168.0.60.

Connecting to the Ouster-OS1 Lidar

connect_lidar is used to setup the network to communicate with lidar and setup ptp.

One time setup

  • Install ptp4l.

    sudo apt install -y linuxptp

  • Make script excutable.

    cd ~/catkin_ws/src/jaguar_robot/scripts
chmod +x connect_lidar

Establishing a connection

  • Power up the lidar.

  • Run the script.

    cd ~/catkin_ws/src/jaguar_robot/scripts
./connect_lidar

  • After the lidar has been on for ~20s, plug it in your ethernet port.

Usage

  • Run robot driver + joystick teleop + sensors (Ouster OS1, IMU, zed2 camera & fisheye camera)

    roslaunch jaguar4x4_2014 move_and_sense.launch

  • Run robot driver + joystick only

    roslaunch jaguar4x4_2014 run_simple.launch

  • or you could use keyboard to control the robot:

    rosrun jaguar4x4_2014 drrobot_keyboard_teleop_node

    This program will use "WASD" key to move the robot, and release the key will stop the robot. Before driving, you need press "z" key to release the robot from "EStop" state.