ldpd: use NO_STR

ldpd/ldp_vty_cmds.c

@@ -37,7 +37,7 @@ DEFUN_NOSH(ldp_mpls_ldp,
 DEFPY (no_ldp_mpls_ldp,
  no_ldp_mpls_ldp_cmd,
  "no mpls ldp",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Global MPLS configuration subcommands\n"
  "Label Distribution Protocol\n")
 {
@@ -64,7 +64,7 @@ DEFUN_NOSH(ldp_l2vpn,
 DEFPY (no_ldp_l2vpn,
  no_ldp_l2vpn_cmd,
  "no l2vpn WORD$l2vpn_name type vpls",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure l2vpn commands\n"
  "L2VPN name\n"
  "L2VPN type\n"
@@ -92,7 +92,7 @@ DEFUN_NOSH(ldp_address_family,
 DEFPY (no_ldp_address_family,
  no_ldp_address_family_cmd,
  "no address-family <ipv4|ipv6>$af",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure Address Family and its parameters\n"
  "IPv4\n"
  "IPv6\n")
@@ -113,7 +113,7 @@ DEFUN_NOSH(ldp_exit_address_family,
 DEFPY (ldp_discovery_holdtime,
  ldp_discovery_holdtime_cmd,
  "[no] discovery <hello|targeted-hello>$hello_type holdtime (1-65535)$holdtime",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure discovery parameters\n"
  "LDP Link Hellos\n"
  "LDP Targeted Hellos\n"
@@ -126,7 +126,7 @@ DEFPY (ldp_discovery_holdtime,
 DEFPY (ldp_discovery_interval,
  ldp_discovery_interval_cmd,
  "[no] discovery <hello|targeted-hello>$hello_type interval (1-65535)$interval",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure discovery parameters\n"
  "LDP Link Hellos\n"
  "LDP Targeted Hellos\n"
@@ -139,7 +139,7 @@ DEFPY (ldp_discovery_interval,
 DEFPY (ldp_dual_stack_transport_connection_prefer_ipv4,
  ldp_dual_stack_transport_connection_prefer_ipv4_cmd,
  "[no] dual-stack transport-connection prefer ipv4",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure dual stack parameters\n"
  "Configure TCP transport parameters\n"
  "Configure prefered address family for TCP transport connection with neighbor\n"
@@ -151,7 +151,7 @@ DEFPY (ldp_dual_stack_transport_connection_prefer_ipv4,
 DEFPY (ldp_dual_stack_cisco_interop,
  ldp_dual_stack_cisco_interop_cmd,
  "[no] dual-stack cisco-interop",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure dual stack parameters\n"
  "Use Cisco non-compliant format to send and interpret the Dual-Stack capability TLV\n")
 {
@@ -161,7 +161,7 @@ DEFPY (ldp_dual_stack_cisco_interop,
 DEFPY (ldp_neighbor_password,
  ldp_neighbor_password_cmd,
  "[no] neighbor A.B.C.D$neighbor password WORD$password",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure neighbor parameters\n"
  "LDP Id of neighbor\n"
  "Configure password for MD5 authentication\n"
@@ -173,7 +173,7 @@ DEFPY (ldp_neighbor_password,
 DEFPY (ldp_neighbor_session_holdtime,
  ldp_neighbor_session_holdtime_cmd,
  "[no] neighbor A.B.C.D$neighbor session holdtime (15-65535)$holdtime",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure neighbor parameters\n"
  "LDP Id of neighbor\n"
  "Configure session parameters\n"
@@ -186,7 +186,7 @@ DEFPY (ldp_neighbor_session_holdtime,
 DEFPY (ldp_neighbor_ttl_security,
  ldp_neighbor_ttl_security_cmd,
  "[no] neighbor A.B.C.D$neighbor ttl-security <disable|hops (1-254)$hops>",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure neighbor parameters\n"
  "LDP Id of neighbor\n"
  "LDP ttl security check\n"
@@ -200,7 +200,7 @@ DEFPY (ldp_neighbor_ttl_security,
 DEFPY (ldp_router_id,
  ldp_router_id_cmd,
  "[no] router-id A.B.C.D$address",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure router Id\n"
  "LSR Id (in form of an IPv4 address)\n")
 {
@@ -210,7 +210,7 @@ DEFPY (ldp_router_id,
 DEFPY (ldp_discovery_targeted_hello_accept,
  ldp_discovery_targeted_hello_accept_cmd,
  "[no] discovery targeted-hello accept [from <(1-199)|(1300-2699)|WORD>$from_acl]",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure discovery parameters\n"
  "LDP Targeted Hellos\n"
  "Accept and respond to targeted hellos\n"
@@ -225,7 +225,7 @@ DEFPY (ldp_discovery_targeted_hello_accept,
 DEFPY (ldp_discovery_transport_address_ipv4,
  ldp_discovery_transport_address_ipv4_cmd,
  "[no] discovery transport-address A.B.C.D$address",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure discovery parameters\n"
  "Specify transport address for TCP connection\n"
  "IP address to be used as transport address\n")
@@ -236,7 +236,7 @@ DEFPY (ldp_discovery_transport_address_ipv4,
 DEFPY (ldp_discovery_transport_address_ipv6,
  ldp_discovery_transport_address_ipv6_cmd,
  "[no] discovery transport-address X:X::X:X$address",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure discovery parameters\n"
  "Specify transport address for TCP connection\n"
  "IPv6 address to be used as transport address\n")
@@ -247,7 +247,7 @@ DEFPY (ldp_discovery_transport_address_ipv6,
 DEFPY (ldp_label_local_advertise,
  ldp_label_local_advertise_cmd,
  "[no] label local advertise [{to <(1-199)|(1300-2699)|WORD>$to_acl|for <(1-199)|(1300-2699)|WORD>$for_acl}]",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure label control and policies\n"
  "Configure local label control and policies\n"
  "Configure outbound label advertisement control\n"
@@ -266,7 +266,7 @@ DEFPY (ldp_label_local_advertise,
 DEFPY (ldp_label_local_advertise_explicit_null,
  ldp_label_local_advertise_explicit_null_cmd,
  "[no] label local advertise explicit-null [for <(1-199)|(1300-2699)|WORD>$for_acl]",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure label control and policies\n"
  "Configure local label control and policies\n"
  "Configure outbound label advertisement control\n"
@@ -282,7 +282,7 @@ DEFPY (ldp_label_local_advertise_explicit_null,
 DEFPY (ldp_label_local_allocate,
  ldp_label_local_allocate_cmd,
  "[no] label local allocate <host-routes$host_routes|for <(1-199)|(1300-2699)|WORD>$for_acl>",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure label control and policies\n"
  "Configure local label control and policies\n"
  "Configure label allocation control\n"
@@ -298,7 +298,7 @@ DEFPY (ldp_label_local_allocate,
 DEFPY (ldp_label_remote_accept,
  ldp_label_remote_accept_cmd,
  "[no] label remote accept {from <(1-199)|(1300-2699)|WORD>$from_acl|for <(1-199)|(1300-2699)|WORD>$for_acl}",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure label control and policies\n"
  "Configure remote/peer label control and policies\n"
  "Configure inbound label acceptance control\n"
@@ -317,7 +317,7 @@ DEFPY (ldp_label_remote_accept,
 DEFPY (ldp_ttl_security_disable,
  ldp_ttl_security_disable_cmd,
  "[no] ttl-security disable",
- "Negate a command or set its defaults\n"
+ NO_STR
  "LDP ttl security check\n"
  "Disable ttl security\n")
 {
@@ -327,7 +327,7 @@ DEFPY (ldp_ttl_security_disable,
 DEFPY (ldp_session_holdtime,
  ldp_session_holdtime_cmd,
  "[no] session holdtime (15-65535)$holdtime",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure session parameters\n"
  "Configure session holdtime\n"
  "Time (seconds)\n")
@@ -353,7 +353,7 @@ DEFUN_NOSH(ldp_interface,
 DEFPY (no_ldp_interface,
  no_ldp_interface_cmd,
  "no interface IFNAME$ifname",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Enable LDP on an interface and enter interface submode\n"
  "Interface's name\n")
 {
@@ -363,7 +363,7 @@ DEFPY (no_ldp_interface,
 DEFPY (ldp_neighbor_ipv4_targeted,
  ldp_neighbor_ipv4_targeted_cmd,
  "[no] neighbor A.B.C.D$address targeted",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure neighbor parameters\n"
  "IP address of neighbor\n"
  "Establish targeted session\n")
@@ -374,7 +374,7 @@ DEFPY (ldp_neighbor_ipv4_targeted,
 DEFPY (ldp_neighbor_ipv6_targeted,
  ldp_neighbor_ipv6_targeted_cmd,
  "[no] neighbor X:X::X:X$address targeted",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure neighbor parameters\n"
  "IPv6 address of neighbor\n"
  "Establish targeted session\n")
@@ -385,7 +385,7 @@ DEFPY (ldp_neighbor_ipv6_targeted,
 DEFPY (ldp_bridge,
  ldp_bridge_cmd,
  "[no] bridge IFNAME$ifname",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Bridge interface\n"
  "Interface's name\n")
 {
@@ -395,7 +395,7 @@ DEFPY (ldp_bridge,
 DEFPY (ldp_mtu,
  ldp_mtu_cmd,
  "[no] mtu (1500-9180)$mtu",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Set Maximum Transmission Unit\n"
  "Maximum Transmission Unit value\n")
 {
@@ -405,7 +405,7 @@ DEFPY (ldp_mtu,
 DEFPY (ldp_member_interface,
  ldp_member_interface_cmd,
  "[no] member interface IFNAME$ifname",
- "Negate a command or set its defaults\n"
+ NO_STR
  "L2VPN member configuration\n"
  "Local interface\n"
  "Interface's name\n")
@@ -432,7 +432,7 @@ DEFUN_NOSH(ldp_member_pseudowire,
 DEFPY (no_ldp_member_pseudowire,
  no_ldp_member_pseudowire_cmd,
  "no member pseudowire IFNAME$ifname",
- "Negate a command or set its defaults\n"
+ NO_STR
  "L2VPN member configuration\n"
  "Pseudowire interface\n"
  "Interface's name\n")
@@ -443,7 +443,7 @@ DEFPY (no_ldp_member_pseudowire,
 DEFPY (ldp_vc_type,
  ldp_vc_type_cmd,
  "[no] vc type <ethernet|ethernet-tagged>$vc_type",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Virtual Circuit options\n"
  "Virtual Circuit type to use\n"
  "Ethernet (type 5)\n"
@@ -455,7 +455,7 @@ DEFPY (ldp_vc_type,
 DEFPY (ldp_control_word,
  ldp_control_word_cmd,
  "[no] control-word <exclude|include>$preference",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Control-word options\n"
  "Exclude control-word in pseudowire packets\n"
  "Include control-word in pseudowire packets\n")
@@ -466,7 +466,7 @@ DEFPY (ldp_control_word,
 DEFPY (ldp_neighbor_address,
  ldp_neighbor_address_cmd,
  "[no] neighbor address <A.B.C.D|X:X::X:X>$pw_address",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Remote endpoint configuration\n"
  "Specify the IPv4 or IPv6 address of the remote endpoint\n"
  "IPv4 address\n"
@@ -478,7 +478,7 @@ DEFPY (ldp_neighbor_address,
 DEFPY (ldp_neighbor_lsr_id,
  ldp_neighbor_lsr_id_cmd,
  "[no] neighbor lsr-id A.B.C.D$address",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Remote endpoint configuration\n"
  "Specify the LSR-ID of the remote endpoint\n"
  "IPv4 address\n")
@@ -489,7 +489,7 @@ DEFPY (ldp_neighbor_lsr_id,
 DEFPY (ldp_pw_id,
  ldp_pw_id_cmd,
  "[no] pw-id (1-4294967295)$pwid",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Set the Virtual Circuit ID\n"
  "Virtual Circuit ID value\n")
 {
@@ -499,7 +499,7 @@ DEFPY (ldp_pw_id,
 DEFPY (ldp_pw_status_disable,
  ldp_pw_status_disable_cmd,
  "[no] pw-status disable",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Configure PW status\n"
  "Disable PW status\n")
 {
@@ -522,7 +522,7 @@ DEFPY (ldp_clear_mpls_ldp_neighbor,
 DEFPY (ldp_debug_mpls_ldp_discovery_hello,
  ldp_debug_mpls_ldp_discovery_hello_cmd,
  "[no] debug mpls ldp discovery hello <recv|sent>$dir",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Debugging functions\n"
  "MPLS information\n"
  "Label Distribution Protocol\n"
@@ -537,7 +537,7 @@ DEFPY (ldp_debug_mpls_ldp_discovery_hello,
 DEFPY (ldp_debug_mpls_ldp_type,
  ldp_debug_mpls_ldp_type_cmd,
  "[no] debug mpls ldp <errors|event|zebra>$type",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Debugging functions\n"
  "MPLS information\n"
  "Label Distribution Protocol\n"
@@ -551,7 +551,7 @@ DEFPY (ldp_debug_mpls_ldp_type,
 DEFPY (ldp_debug_mpls_ldp_messages_recv,
  ldp_debug_mpls_ldp_messages_recv_cmd,
  "[no] debug mpls ldp messages recv [all]$all",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Debugging functions\n"
  "MPLS information\n"
  "Label Distribution Protocol\n"
@@ -565,7 +565,7 @@ DEFPY (ldp_debug_mpls_ldp_messages_recv,
 DEFPY (ldp_debug_mpls_ldp_messages_sent,
  ldp_debug_mpls_ldp_messages_sent_cmd,
  "[no] debug mpls ldp messages sent [all]$all",
- "Negate a command or set its defaults\n"
+ NO_STR
  "Debugging functions\n"
  "MPLS information\n"
  "Label Distribution Protocol\n"