sugar-wifi-conf

English | 简体中文

A BLE service to configure wifi over bluetooth for a Raspberry Pi. You can:

• get wifi name, ip address, pi model
• config wifi
• get other custom info, e.g. CPU tempreture, CPU load, or whatever you can get by shell
• remote control the pi to execute shell script and get response, such as shutdown, reboot

Tested on Raspberry Pi 3B/3B+/zero w (models with bluetooth) with Raspbian.

To access client-side app, please use Wechat app to scan the QR-code above. Source code of client-side is in folder /sugar-wifi-miniapp.

If you don't have wechat, you can use web-bluetooth to connect to your pi. Make sure your device and broswer support web-bluetooth api, visit https://www.pisugar.com/sugar-wifi-conf to connect. (Tested on MacOS and Android with Chrome, iOS WebBLE browser) Source code of web-bluetooth client is in folder /web-bluetooth-client.

Quick Install

wget http://cdn.pisugar.com/release/sugarwificonfig.sh -O- | sh

Install from Github

git clone https://github.com/PiSugar/sugar-wifi-conf.git
sudo -s . ./sugar-wifi-conf/wificonfig.sh

# the scrpit will add sugar-wifi-conf to /etc/rc.local so that it can run on startup

## optional parameters

# edit /etc/rc.local to append parameters to execute path 
# param 1: key 
# param 2: path to custom config file
# example: 
sudo /home/pi/sugar-wifi-conf/build/sugar-wifi-conf pisugar /home/pi/sugar-wifi-conf/custom_config.json

Custom configuration

By editing the custom config file, you can let the pi broadcast custom data, recieve and execute custom shell scripts. Note: please ensure that the config file is accessable for the program.

custom_config.json example

{
  "note": {
    "info" : {
      "label": "name of the item, within 20 bytes",
      "command": "the command to get value of the item, within 20 bytes",
      "interval": "run command to get data in every X seconds"
    },
   "commands": {
      "label": "name of the item, within 20 bytes",
      "command": "the command to execute"
    }
  },
  "info": [
    {
      "label": "CPU Temp",
      "command": "vcgencmd measure_temp | cut -d = -f 2 | awk '{printf \"%s \", $1}'",
      "interval": 5
    },
    {
      "label": "CPU Load",
      "command": "top -bn1 | grep load | awk '{printf \"%.2f%%\", $(NF-2)}'",
      "interval": 1
    },
    {
      "label": "Memory",
      "command": "free -m | awk 'NR==2{printf \"%s/%sMB\", $3,$2 }'",
      "interval": 5
    },
    {
      "label": "UP Time",
      "command": "uptime -p | cut -d 'p' -f 2 | awk '{ printf \"%s\", $0 }'",
      "interval": 10
    }
  ],
  "commands": [
    {
      "label": "ls",
      "command": "ls"
    },
    {
      "label": "shutdown",
      "command": "shutdown"
    },
    {
      "label": "cancel shutdown",
      "command": "shutdown -c"
    },
    {
      "label": "reboot",
      "command": "reboot"
    }
  ]
}

BLE datasheet

You can build your own client-side app base on this datasheet.

Service uuid: FD2B-4448-AA0F-4A15-A62F-EB0BE77A0000

charateristic	uuid	properties	note
SERVICE_NAME	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0001	read	service name
DEVICE_MODEL	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0002	read	pi model info
WIFI_NAME	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0003	notify	current wifi name
IP_ADDRESS	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0004	notify	internal ip addresses
INPUT	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0005	write	input for configuring wifi (deprecated)
NOTIFY_MESSAGE	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0006	notify	response for configuring wifi
INPUT_SEP	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0007	write	input for configuring wifi（subcontracting）
CUSTOM_COMMAND_INPUT	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0008	write	input for custom commands（subcontracting）
CUSTOM_COMMAND_NOTIFY	FD2B-4448-AA0F-4A15-A62F-EB0BE77A0009	notify	response for custom commands（subcontracting）
CUSTOM_INFO_LABEL	0000-0000-0000-0000-0000-FD2BCCCAXXXX	read	label of custom info
CUSTOM_INFO	0000-0000-0000-0000-0000-FD2BCCCBXXXX	notify	value of custom info
CUSTOM_COMMAND_LABEL	0000-0000-0000-0000-0000-FD2BCCCCXXXX	read	label of custom command

Input and Output format

charateristic	format
INPUT_SEP	format: key&%&ssid&%&password%#% (subcontract in 20 btyes) e.g. pisugar&%&home_wifi&%&12345678%#%
CUSTOM_COMMAND_INPUT	format: key&%&last_4_digit_uuid%#% (subcontract in 20 btyes) e.g. pisugar&%&1234%#% will execute the custom command with its label uuid end in "1234"
CUSTOM_COMMAND_NOTIFY	subcontract in 20 btyes, ended in "%#%"
CUSTOM_INFO_LABEL	a custom info label (FD2BCCCA1234) will have a corresponding value (FD2BCCCB1234)
CUSTOM_COMMAND_LABEL	all custom commands with be broadcast in uuid "FD2BCCCCXXXX"