V2.4EZ is a fork of the VORON2.4 and VORONTrident printers:
VORON2.4: https://github.com/VoronDesign/Voron-2
VORONTrident: https://github.com/VoronDesign/Voron-Trident
Provide a clean upgrade path from a stock V2.4 to an insulated V2.4 with a solid extrusion door, with minimal printed parts required and no core functional part changes. This means you can purchase a V2.4 printed functional parts kit and build this without any additional printed parts, then print the remaining cosmetic skirt pieces.
-Vertical extrusions change from 2020 to 4040 (HFSB5-4040-XXX-LCP-RCP)
-Horizontal extrusions on the bottom change from 2020 to 4020 (HFSB5-2040-XXX-TPW)
-Spare 2020 Horizontal extrusions from the bottom move to the top to retain panels
-EZ Front Door (4x 2020 extrusions, 2x HHPBSN5-SET hinges, 1x HFHDLB5-35 handle)
-No core functional printed parts are changed except for power inlet (can use V2.4 inlet temporarily)
-Trident side skirts (stock) are used with same 250/300/350mm build size options
-EZ Front Skirts are used (40mm deep, with fixed mini12864 mount) to sit flush with door when closed
-V2.4EZ rear skirt is used (Trident + V2.4 skirt design mixture to clear Z drives)
-Trident style printed corner covers fit around existing V2.4 Z drives
-Can reuse existing deck, top, side, and rear panels to start with
-Printer bottom electronics cover is new--extends 20mm extra in each direction
-EZ Front Door requires new polycarbonate piece (can purchase size to fit in channel of extrusions, or do Doom "double PC panel" solution)
-Optional, can insert reflectix in extrusion slots on sides and back, and below deck panel. Top Reflectix insulation TBD