rework as a library with examples

this makes it easier to use in an application

.gitignore

@@ -13,7 +13,6 @@ develop-eggs/
 dist/
 downloads/
 eggs/
-lib/
 lib64/
 parts/
 sdist/

README.md

@@ -2,3 +2,5 @@ pyseek
 ======
 
 Python interface for Seek Thermal device
+
+See pyseek/examples for example usage

pyseek/__init__.py

@@ -0,0 +1,181 @@
+'''pyseek thermal camera library'''
+
+'''
+ This is based on pyseek by Fry-kun, which has these credits:
+ 
+ "Many thanks to the folks at eevblog, especially (in no particular order) 
+   miguelvp, marshallh, mikeselectricstuff, sgstair and many others
+     for the inspiration to figure this out"
+
+'''
+
+import usb.core
+import usb.util
+from PIL import Image
+from scipy.misc import toimage
+import numpy, sys
+
+class PySeekError(IOError):
+    '''pyseek thermal camera error'''
+    pass
+
+class PySeek:
+    '''pyseek thermal camera control'''
+
+    def __init__(self):
+        self.calibration = None
+        self.dev = None
+        self.debug = False
+
+    def send_msg(self, bmRequestType, bRequest, wValue=0, wIndex=0, data_or_wLength=None, timeout=None):
+        '''send a message to the camera'''
+        ret = self.dev.ctrl_transfer(bmRequestType, bRequest, wValue, wIndex, data_or_wLength, timeout)
+        if ret != len(data_or_wLength):
+            raise PySeekError()
+
+    def receive_msg(self, bRequest, wValue, wIndex, data_or_wLength):
+        '''receive a message from camera'''
+        return self.dev.ctrl_transfer(0xC1, bRequest, wValue, wIndex, data_or_wLength)
+
+    def deinit(self):
+        '''Deinit the device'''
+        msg = '\x00\x00'
+        for i in range(3):
+            self.send_msg(0x41, 0x3C, 0, 0, msg)
+
+    def open(self):
+        '''find and open the camera. Raise PySeekError on error'''
+        # find our Seek Thermal device  289d:0010
+        self.dev = usb.core.find(idVendor=0x289d, idProduct=0x0010)
+        if not self.dev:
+            raise PySeekError()
+
+        # set the active configuration. With no arguments, the first configuration will be the active one
+        self.dev.set_configuration()
+
+        # get an endpoint instance
+        cfg = self.dev.get_active_configuration()
+        intf = cfg[(0,0)]
+
+        custom_match = lambda e: usb.util.endpoint_direction(e.bEndpointAddress) == usb.util.ENDPOINT_OUT
+        ep = usb.util.find_descriptor(intf, custom_match=custom_match)   # match the first OUT endpoint
+        assert ep is not None
+
+        # Setup device
+        try:
+            msg = '\x01'
+            self.send_msg(0x41, 0x54, 0, 0, msg)
+        except Exception as e:
+            self.deinit()
+            msg = '\x01'
+            self.send_msg(0x41, 0x54, 0, 0, msg)
+
+        #  Some day we will figure out what all this init stuff is and
+        #  what the returned values mean.
+        self.send_msg(0x41, 0x3C, 0, 0, '\x00\x00')
+        ret1 = self.receive_msg(0x4E, 0, 0, 4)
+        ret2 = self.receive_msg(0x36, 0, 0, 12)
+
+        self.send_msg(0x41, 0x56, 0, 0, '\x20\x00\x30\x00\x00\x00')
+        ret3 = self.receive_msg(0x58, 0, 0, 0x40)
+
+        self.send_msg(0x41, 0x56, 0, 0, '\x20\x00\x50\x00\x00\x00')
+        ret4 = self.receive_msg(0x58, 0, 0, 0x40)
+
+        self.send_msg(0x41, 0x56, 0, 0, '\x0C\x00\x70\x00\x00\x00')
+        ret5 = self.receive_msg(0x58, 0, 0, 0x18)
+
+        self.send_msg(0x41, 0x56, 0, 0, '\x06\x00\x08\x00\x00\x00')
+        ret6 = self.receive_msg(0x58, 0, 0, 0x0C)
+
+        self.send_msg(0x41, 0x3E, 0, 0, '\x08\x00')
+        ret7 = self.receive_msg(0x3D, 0, 0, 2)
+
+        self.send_msg(0x41, 0x3E, 0, 0, '\x08\x00')
+        self.send_msg(0x41, 0x3C, 0, 0, '\x01\x00')
+        ret8 = self.receive_msg(0x3D, 0, 0, 2)
+
+    def cal_ok(self, x, y):
+        value = self.calibration[x][y]
+        return value != 0 and value < 15000
+
+    def get_array(self):
+        '''return next image from the camera as a numpy array. Raise PySeekError on error'''
+        tries = 100
+        while tries:
+            tries -= 1
+            # Send read frame request
+            self.send_msg(0x41, 0x53, 0, 0, '\xC0\x7E\x00\x00')
+            try:
+                ret9  = self.dev.read(0x81, 0x3F60, 1000)
+                ret9 += self.dev.read(0x81, 0x3F60, 1000)
+                ret9 += self.dev.read(0x81, 0x3F60, 1000)
+                ret9 += self.dev.read(0x81, 0x3F60, 1000)
+            except usb.USBError as e:
+                raise PySeekError()
+
+            #  Let's see what type of frame it is
+            #  1 is a Normal frame, 3 is a Calibration frame
+            #  6 may be a pre-calibration frame
+            #  5, 10 other... who knows.
+            status = ret9[20]
+            if self.debug:
+                print ('%5d'*21 ) % tuple([ret9[x] for x in range(21)])
+                print(status, len(ret9))
+
+            if status == 1:
+                #  Convert the raw calibration data to a string array
+                calimg = Image.fromstring("I", (208,156), ret9, "raw", "I;16")
+
+                #  Convert the string array to an unsigned numpy int16 array
+                im2arr = numpy.asarray(calimg)
+                self.calibration = im2arr.astype('uint16')
+
+            if status == 3 and self.calibration is not None:
+                #  Convert the raw image data to a string array
+                img = Image.fromstring("I", (208,156), ret9, "raw", "I;16")
+
+                #  Convert the string array to an unsigned numpy int16 array
+                im1arr = numpy.asarray(img)
+                im1arrF = im1arr.astype('uint16')
+
+                if self.debug:
+                    #  Subtract the calibration array from the image array and add an offset
+                    print("Calibration:")
+                    for x in range(30):
+                        for y in range(10):
+                            sys.stdout.write("%4u " % self.calibration[x][y])
+                        print("")
+                    print("Data:")
+                    for x in range(30):
+                        for y in range(10):
+                            sys.stdout.write("%4u " % im1arrF[x][y])
+                        print("")
+
+
+                ret = (im1arrF-self.calibration) + 800
+
+                # for some strange reason there are blank lines and
+                # gaps. This is a rough attempt to fill those in.
+                # it still leaves some speckling
+                for x in range(156):
+                    for y in range(208):
+                        if not self.cal_ok(x,y):
+                            if x > 0 and self.cal_ok(x-1,y):
+                                ret[x][y] = ret[x-1][y]
+                            elif x < 155 and self.cal_ok(x+1,y):
+                                ret[x][y] = ret[x+1][y]
+                            elif y > 0 and self.cal_ok(x,y-1):
+                                ret[x][y] = ret[x][y-1]
+                            elif y < 207 and self.cal_ok(x,y+1):
+                                ret[x][y] = ret[x][y+1]
+
+                return ret
+
+        raise PySeekError()
+
+    def get_image(self):
+        '''return next image from the camera as a scipy image. Raise PySeekError on error'''
+        a = self.get_array()
+        return toimage(a)
+

pyseek/examples/pyseek_capture.py

@@ -0,0 +1,10 @@
+'''pyseek thermal camera library - capture example'''
+
+import pyseek
+from pyseek.lib.PGM import PGM_write
+
+seek = pyseek.PySeek()
+seek.open()
+for i in range(100):
+    img = seek.get_array()
+    PGM_write('seek-%u.pgm' % i, img)

pyseek/examples/pyseek_view.py

@@ -0,0 +1,51 @@
+'''pyseek thermal camera library - viewer example'''
+
+import Tkinter
+import pyseek
+from pyseek.lib.PGM import PGM_write
+from PIL import ImageTk
+import sys, os, time
+
+def show_frame(seek, first=False):
+    global fps_t, fps_f
+
+    from scipy.misc import toimage
+
+    arr = seek.get_array()
+    disp_img = toimage(arr)
+
+    if first:
+        root.geometry('%dx%d' % (disp_img.size[0], disp_img.size[1]))
+    tkpi = ImageTk.PhotoImage(disp_img)
+    label_image.imgtk = tkpi
+    label_image.configure(image=tkpi)
+    label_image.place(x=0, y=0, width=disp_img.size[0], height=disp_img.size[1])
+
+    now = int(time.time())
+    fps_f += 1
+    if fps_t == 0:
+        fps_t = now
+    elif fps_t < now:
+        print '\rFPS: %.2f' % (1.0 * fps_f / (now-fps_t)),
+        sys.stdout.flush()
+        fps_t = now
+        fps_f = 0
+
+    label_image.after(1, show_frame, seek)    # after 1ms, run show_frame again
+
+
+seek = pyseek.PySeek()
+seek.open()
+
+root = Tkinter.Tk()
+root.title('Seek Thermal camera')
+root.bind("<Escape>", lambda e: root.quit())
+
+label_image = Tkinter.Label(root)
+label_image.pack()
+
+fps_t = 0
+fps_f = 0
+
+show_frame(seek, first=True)
+root.mainloop() # UI has control until user presses <<Escape>>

pyseek/lib/PGM.py

@@ -0,0 +1,74 @@
+'''16 bit PGM read/write code'''
+
+import numpy
+
+class PGMError(Exception):
+	'''PGMLink error class'''
+	def __init__(self, msg):
+            Exception.__init__(self, msg)
+
+def PGM_read(filename):
+    '''read a 8/16 bit PGM image, returning a numpy array'''
+    f = open(filename, mode='rb')
+    fmt = f.readline()
+    if fmt.strip() != 'P5':
+        raise PGMError('Expected P5 image in %s' % filename)
+    dims = f.readline()
+    dims = dims.split(' ')
+    width = int(dims[0])
+    height = int(dims[1])
+    line = f.readline()
+    if line[0] == '#':
+        # discard comment
+        line = f.readline()
+    line = line.strip()
+    if line == "65535":
+        eightbit = False
+    elif line == "255":
+        eightbit = True
+    else:
+        raise PGMError('Expected 8/16 bit image image in %s - got %s' % (filename, line))
+    if eightbit:
+        rawdata = numpy.fromfile(f, dtype='uint8')
+        rawdata = numpy.reshape(rawdata, (height,width))
+    else:
+        rawdata = numpy.fromfile(f, dtype='uint16')
+        rawdata = rawdata.byteswap(True)
+        rawdata = numpy.reshape(rawdata, (height, width))
+    f.close()
+    return rawdata.byteswap(True)
+
+
+def PGM_write(filename, rawdata):
+    '''write a 8/16 bit PGM image given a numpy array'''
+    if rawdata.dtype == numpy.dtype('uint8'):
+        numvalues = 255
+    elif rawdata.dtype == numpy.dtype('uint16'):
+        numvalues = 65535
+    else:
+        raise PGMError("Invalid array data type '%s'" % rawdata.dtype)
+    shape = rawdata.shape
+    if len(shape) != 2:
+        raise PGMError("Invalid array shape '%s'" % shape)
+    height = shape[0]
+    width = shape[1]
+
+    f = open(filename, mode='wb')
+    f.write('''P5
+%u %u
+%u
+''' % (width, height, numvalues))
+
+    rawdata = rawdata.byteswap(True)
+    rawdata = rawdata.tofile(f)
+    f.close()
+
+if __name__ == "__main__":
+    import sys
+    filename = sys.argv[1]
+    print("Reading %s" % filename)
+    a = PGM_read(filename)
+
+    filename = filename + ".test"
+    print("Writing %s" % filename)
+    PGM_write(filename, a)

pyseek/lib/__init__.py

@@ -0,0 +1 @@
+'''pyseek thermal camera library - library code'''