Skip to content

Funcoil/rust-sysfs-gpio

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

rust-sysfs-gpio

Build Status Version License

rust-sysfs-gpio is a rust library/crate providing access to the Linux sysfs GPIO interface (https://www.kernel.org/doc/Documentation). It seeks to provide an API that is safe, convenient, and efficient.

Many devices such as the Raspberry Pi or Beaglebone Black provide userspace access to a number of GPIO peripherals. The standard kernel API for providing access to these GPIOs is via sysfs.

You might want to also check out the gpio-utils Project for a convenient way to associate names with pins and export them as part of system boot. That project uses this library.

Install/Use

To use sysfs_gpio, first add this to your Cargo.toml:

[dependencies]
sysfs_gpio = "0.4"

Then, add this to your crate root:

extern crate sysfs_gpio;

Example/API

Blinking an LED:

extern crate sysfs_gpio;

use sysfs_gpio::{Direction, Pin};
use std::thread::sleep;
use std::time::Duration;

fn main() {
    let my_led = Pin::new(127); // number depends on chip, etc.
    my_led.with_exported(|| {
        // There is a known issue on Raspberry Pi with this.
        // The exported GPIO doesn't have correct permissions
        // immediatelly.
        // Try adding sleep(Duration::from_millis(200)) here.
        loop {
            my_led.set_value(0).unwrap();
            sleep(Duration::from_millis(200));
            my_led.set_value(1).unwrap();
            sleep(Duration::from_millis(200));
        }
    }).unwrap();
}

More Examples:

Features

The following features are planned for the library:

  • Support for exporting a GPIO
  • Support for unexporting a GPIO
  • Support for setting the direction of a GPIO (in/out)
  • Support for reading the value of a GPIO input
  • Support for writing the value of a GPIO output
  • Support for configuring whether a pin is active low/high
  • Support for configuring interrupts on GPIO
  • Support for polling on GPIO with configured interrupt

Cross Compiling

Most likely, the machine you are running on is not your development machine (although it could be). In those cases, you will need to cross-compile. The rust-cross guide provides excellent, detailed instructions for cross-compiling.

Running the Example

Cross-compiling can be done by specifying an appropriate target. You can then move that to your device by whatever means and run it.

$ cargo build --target=arm-unknown-linux-gnueabihf --example blinky
$ scp target/arm-unknown-linux-gnueabihf/debug/examples/blinky ...

License

Copyright (c) 2015, Paul Osborne <ospbau@gmail.com>

Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
http://www.apache.org/license/LICENSE-2.0> or the MIT license
<LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
option.  This file may not be copied, modified, or distributed
except according to those terms.

About

A Rust Interface to the Linux sysfs GPIO interface (https://www.kernel.org/doc/Documentation/gpio/sysfs.txt)

Resources

License

Apache-2.0, MIT licenses found

Licenses found

Apache-2.0
LICENSE-APACHE
MIT
LICENSE-MIT

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Rust 100.0%