Tensorflow implementation for novel view synthesis from sparse input images.
Local Light Field Fusion: Practical View Synthesis
with Prescriptive Sampling Guidelines
Ben Mildenhall*1,
Pratul Srinivasan*1,
Rodrigo Ortiz-Cayon2,
Nima Khademi Kalantari3,
Ravi Ramamoorthi4,
Ren Ng1,
Abhishek Kar2
1UC Berkeley, 2Fyusion Inc, 3Texas A&M, 4UC San Diego
*denotes equal contribution
In SIGGRAPH 2019
- Installation TL;DR: Setup and render a demo scene
- Full Installation Details
- Using your own input images for view synthesis
- General step-by-step usage
- Using your own poses without running COLMAP
- Troubleshooting
- Citation
First install docker (instructions) and nvidia-docker (instructions).
Run this in the base directory to download a pretrained checkpoint, download a Docker image, and run code to generate MPIs and a rendered output video on an example input dataset:
bash download_data.sh
sudo docker pull bmild/tf_colmap
sudo docker tag bmild/tf_colmap tf_colmap
sudo nvidia-docker run --rm --volume /:/host --workdir /host$PWD tf_colmap bash demo.sh
A video like this should be output to data/testscene/outputs/test_vid.mp4:
If this works, then you are ready to start processing your own images! Run
sudo nvidia-docker run -it --rm --volume /:/host --workdir /host$PWD tf_colmap
to enter a shell inside the Docker container, and skip ahead to the section on using your own input images for view synthesis.
You can either install the prerequisites by hand or use our provided Dockerfile to make a docker image.
In either case, start by downloading this repository, then running the download_data.sh script to download a pretrained model and example input dataset:
bash download_data.sh
After installing dependencies, try running bash demo.sh from the base directory. (If using Docker, run this inside the container.) This should generate the video shown in the Installation TL;DR section at data/testscene/outputs/test_vid.mp4.
- Install CUDA, Tensorflow, COLMAP, ffmpeg
- Install the required Python packages:
pip install -r requirements.txt
- Optional: run
makeincuda_renderer/directory. - Optional: run
makeinopengl_viewer/directory. You may need to install GLFW or some other OpenGL libraries. For GLFW:
sudo apt-get install libglfw3-dev
To build the docker image on your own machine, which may take 15-30 mins:
sudo docker build -t tf_colmap:latest .
To download the image (~6GB) instead:
sudo docker pull bmild/tf_colmap
sudo docker tag bmild/tf_colmap tf_colmap
Afterwards, you can launch an interactive shell inside the container:
sudo nvidia-docker run -it --rm --volume /:/host --workdir /host$PWD tf_colmap
From this shell, all the code in the repo should work (except opengl_viewer).
To run any single command <command...> inside the docker container:
sudo nvidia-docker run --rm --volume /:/host --workdir /host$PWD tf_colmap <command...>
Our method takes in a set of images of a static scene, promotes each image to a local layered representation (MPI), and blends local light fields rendered from these MPIs to render novel views. Please see our paper for more details.
As a rule of thumb, you should use images where the maximum disparity between views is no more than about 64 pixels (watch the closest thing to the camera and don't let it move more than ~1/8 the horizontal field of view between images). Our datasets usually consist of 20-30 images captured handheld in a rough grid pattern.
You can quickly render novel view frames and a .mp4 video from a zip file of your captured input images with the zip2mpis.sh bash script.
bash zip2mpis.sh <zipfile> <your_outdir> [--height HEIGHT]
height is the output height in pixels. We recommend using a height of 360 pixels for generating results quickly.
Begin by creating a base scene directory (e.g., scenedir/), and copying your images into a subdirectory called images/ (e.g., scenedir/images).
This script calls COLMAP to run structure from motion to get 6-DoF camera poses and near/far depth bounds for the scene.
python imgs2poses.py <your_scenedir>
This script uses our pretrained Tensorflow graph (make sure it exists in checkpoints/papermodel) to generate MPIs from the posed images. They will be saved in <your_mpidir>, a directory will be created by the script.
python imgs2mpis.py <your_scenedir> <your_mpidir> \
[--checkpoint CHECKPOINT] \
[--factor FACTOR] [--width WIDTH] [--height HEIGHT] [--numplanes NUMPLANES] \
[--disps] [--psvs]
You should set at most one of factor, width, or height to determine the output MPI resolution (factor will scale the input image size down an integer factor, eg. 2, 4, 8, and height/width directly scale the input images to have the specified height or width). numplanes is 32 by default. checkpoint is set to the downloaded checkpoint by default.
Example usage:
python imgs2mpis.py scenedir scenedir/mpis --height 360
You can either generate a list of novel view camera poses and render out a video, or you can load the saved MPIs in our interactive OpenGL viewer.
First, generate a smooth new view path by calling
python imgs2renderpath.py <your_scenedir> <your_posefile> \
[--x_axis] [--y_axis] [--z_axis] [--circle][--spiral]
<your_posefile> is the path of an output .txt file that will be created by the script, and will contain camera poses for the rendered novel views. The five optional arguments specify the trajectory of the camera. The xyz-axis options are straight lines along each camera axis respectively, "circle" is a circle in the camera plane, and "spiral" is a circle combined with movement along the z-axis.
Example usage:
python imgs2renderpath.py scenedir scenedir/spiral_path.txt --spiral
See llff/math/pose_math.py for the code that generates these path trajectories.
You can build this in the cuda_renderer/ directory by calling make.
Uses CUDA to render out a video. Specify the height of the output video in pixels (-1 for same resolution as the MPIs), the factor for cropping the edges of the video (default is 1.0 for no cropping), and the compression quality (crf) for the saved MP4 file (default is 18, lossless is 0, reasonable is 12-28).
./cuda_renderer mpidir <your_posefile> <your_videofile> height crop crf
<your_videofile> is the path to the video file that will be written by FFMPEG.
Example usage:
./cuda_renderer scenedir/mpis scenedir/spiral_path.txt scenedir/spiral_render.mp4 -1 0.8 18
Use Tensorflow to render out a video (~100x slower than CUDA renderer). Optionally, specify how many MPIs are blended for each rendered output (default is 5) and what factor to crop the edges of the video (default is 1.0 for no cropping).
python mpis2video.py <your_mpidir> <your_posefile> videofile [--use_N USE_N] [--crop_factor CROP_FACTOR]
Example usage:
python mpis2video.py scenedir/mpis scenedir/spiral_path.txt scenedir/spiral_render.mp4 --crop_factor 0.8
Controls:
- ESC to quit
- Move mouse to translate in camera plane
- Click and drag to rotate camera
- Scroll to change focal length (zoom)
- 'L' to animate circle render path
The OpenGL viewer cannot be used in the Docker container.
You need OpenGL installed, particularly GLFW:
sudo apt-get install libglfw3-dev
You can build the viewer in the opengl_viewer/ directory by calling make.
General usage (in opengl_viewer/ directory) is
./opengl_viewer mpidir
Here we explain the poses_bounds.npy file format. This file stores a numpy array of size Nx17 (where N is the number of input images). You can see how it is loaded in the three lines here. Each row of length 17 gets reshaped into a 3x5 pose matrix and 2 depth values that bound the closest and farthest scene content from that point of view.
The pose matrix is a 3x4 camera-to-world affine transform concatenated with a 3x1 column [image height, image width, focal length] to represent the intrinsics (we assume the principal point is centered and that the focal length is the same for both x and y).
The right-handed coordinate system of the the rotation (first 3x3 block in the camera-to-world transform) is as follows: from the point of view of the camera, the three axes are
[down, right, backwards]
which some people might consider to be [-y,x,z], where the camera is looking along -z. (The more conventional frame [x,y,z] is [right, up, backwards]. The COLMAP frame is [right, down, forwards] or [x,-y,-z].)
If you have a set of 3x4 cam-to-world poses for your images plus focal lengths and close/far depth bounds, the steps to recreate poses_bounds.npy are:
- Make sure your poses are in camera-to-world format, not world-to-camera.
- Make sure your rotation matrices have the columns in the correct coordinate frame
[down, right, backwards]. - Concatenate each pose with the
[height, width, focal]intrinsics vector to get a 3x5 matrix. - Flatten each of those into 15 elements and concatenate the close and far depths.
- Stack the 17-d vectors to get a Nx17 matrix and use
np.saveto store it asposes_bounds.npyin the scene's base directory (same level containing theimages/directory).
This should explain the pose processing after COLMAP.
PyramidCU::GenerateFeatureList: an illegal memory access was encountered: Some machine configurations might run into problems running the scriptimgs2poses.py. A solution to that would be to set the environment variableCUDA_VISIBLE_DEVICES. If the issue persists, try uncommenting this line to stop COLMAP from using the GPU to extract image features.- Black screen: In the latest versions of MacOS, OpenGL initializes a context with a black screen until the window is dragged or resized. If you run into this problem, please drag the window to another position.
- COLMAP fails: If you see "Could not register, trying another image", you will probably have to try changing COLMAP optimization parameters or capturing more images of your scene. See here.
If you find this useful for your research, please cite the following paper.
@article{mildenhall2019llff,
title={Local Light Field Fusion: Practical View Synthesis with Prescriptive Sampling Guidelines},
author={Ben Mildenhall and Pratul P. Srinivasan and Rodrigo Ortiz-Cayon and Nima Khademi Kalantari and Ravi Ramamoorthi and Ren Ng and Abhishek Kar},
journal={ACM Transactions on Graphics (TOG)},
year={2019},
}
