Add Lanbon L9 for testing

src/drv/tft/tft_driver_arduinogfx.cpp

@@ -25,7 +25,18 @@ void ArduinoGfx::init(int w, int h)
 {
     LOG_TRACE(TAG_TFT, F(D_SERVICE_STARTING));
 
-#if(TFT_WIDTH == 480) && (TFT_HEIGHT == 480) && defined(LILYGO_T_RGB)
+#if(TFT_WIDTH == 170) && (TFT_HEIGHT == 320) 
+    Arduino_DataBus *bus = new Arduino_ESP32PAR8Q(
+        TFT_DC, TFT_CS, TFT_WR, TFT_RD,
+        TFT_D0, TFT_D1, TFT_D2, TFT_D3, TFT_D4, TFT_D5, TFT_D6, TFT_D7);
+    Arduino_GFX *gfx = new Arduino_ST7789(bus,
+        TFT_RST /* RST */, TFT_ROTATION /* rotation */, true /* IPS */,
+        TFT_WIDTH /* width */, TFT_HEIGHT /* height */,
+        35 /* col offset 1 */, 0 /* row offset 1 */,
+        35 /* col offset 2 */, 0 /* row offset 2 */
+    );
+
+#elif(TFT_WIDTH == 480) && (TFT_HEIGHT == 480) && defined(LILYGO_T_RGB)
     Wire.begin(8 /* SDA */, 48 /* SCL */, 800000L /* speed */);
     Arduino_DataBus* bus            = new Arduino_XL9535SWSPI(8 /* SDA */, 48 /* SCL */, 2 /* XL PWD */, 3 /* XL CS */,
                                                               5 /* XL SCK */, 4 /* XL MOSI */);

user_setups/esp32s3/lanbon_l9.ini

@@ -0,0 +1,68 @@
+;***************************************************;
+;        Lanbon L9 with ST7789                      ;
+;***************************************************;
+
+[env:lanbon_l9]
+extends = arduino_esp32s3_v2, flash_16mb
+board = esp32-s3-devkitc-1
+board_build.arduino.memory_type = qio_opi
+
+build_flags =
+    ${env.build_flags}
+    ${esp32s3.build_flags}
+    ${esp32s3.ps_ram}
+    -D HASP_MODEL="Lanbon L9"
+    ;-D ARDUINO_USB_MODE=0
+    ;-DARDUINO_USB_CDC_ON_BOOT
+	;-DUSE_USB_CDC_CONSOLE
+
+;region -- TFT_eSPI build options ------------------------
+    -D ST7789_DRIVER=1
+    -D HASP_USE_ARDUINOGFX=1
+    -D TFT_WIDTH=170
+    -D TFT_HEIGHT=320
+    -D TFT_ROTATION=0       ; see TFT_ROTATION values
+    ; -D TFT_INVERSION_OFF   ; for normal colors
+    ;-D TFT_INVERSION_ON
+    ;-D TFT_RGB_ORDER=0       ; Colour order Blue-Green-Red
+    ;-D INVERT_COLORS=1       ; for inverted colors
+
+    -D TFT_RST=-1
+    -D TFT_CS=21
+    -D TFT_DC=17
+    -D TFT_WR=13
+    -D TFT_RD=18
+    -D TFT_D0=6
+    -D TFT_D1=7
+    -D TFT_D2=15
+    -D TFT_D3=16
+    -D TFT_D4=10
+    -D TFT_D5=9
+    -D TFT_D6=46
+    -D TFT_D7=3
+    -D TFT_BCKL=42
+    ; Touch Setttings
+    -D TOUCH_WIDTH=170
+    -D TOUCH_HEIGHT=320
+    -D TOUCH_DRIVER=0x911
+    -D TOUCH_SCL=0
+    -D TOUCH_SDA=35
+    -D TOUCH_IRQ=-1
+    -D TOUCH_RST=-1
+    -D I2C_TOUCH_ADDRESS=0x5d ; or 0x14
+    -D I2C_TOUCH_FREQUENCY=400000
+;endregion
+
+;region -- Library options -------------------------------
+lib_deps =
+    ${env.lib_deps}
+    ${esp32s3.lib_deps}
+    ${arduino_esp32s3_v2.lib_deps}
+    ${arduinogfx.lib_deps}
+    ${goodix.lib_deps}
+
+lib_ignore =
+    ${env.lib_ignore}
+    ${esp32s3.lib_ignore}
+    ${arduino_esp32s3_v2.lib_ignore}
+;endregion