Skip to content

This demo program shows how to create your own consumption meter with an MBUS slave wing for feather boards or slave shield for Arduino MKR.

License

Notifications You must be signed in to change notification settings

HWHardsoft/Arduino-MBUS-Meter

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

14 Commits
 
 
 
 
 
 

Repository files navigation

Arduino-MBUS-Meter

This is an example for Arduino IDE how to create an own MBUS consumption meter (MBUS Slave) for Arduino MKR boards, Raspberry Pi Pico and Feather Boards (including ESP32, RP2040, nRF52840, Cortex M0 ....).

Data output of the simulated meter in Lorusfree

Hardware

I've used our MBUS Slave boards:

MBUS Slave Wing MBUS Slave shield for Arduino MKR Raspberry Pi Pico HAT

MBUS Slave Raspberry Pi Pico HAT: https://www.hwhardsoft.de/english/projects/m-bus-pico-hat/

MBUS Slave Feather Wing: https://www.hwhardsoft.de/english/projects/m-bus-featherwing/

MBUS Slave Arduino MKR Shield: https://www.hwhardsoft.de/english/projects/m-bus-mkr-shield/

The code was tested with the following boards:

  • Arduino MKR Wifi 1010
  • Adafruit Feather Huzzah32
  • Adafruit Feather nRF52840
  • Adafruit Feather M0 Express
  • Sparkfun ESP32 Thing Plus
  • Sparkfun Thing Plus RP2040
  • Raspberry Pi Pico

Furthermore, an MBUS master is required to supply the MBUS and to be able to exchange data with the slave. For example, you can use a Raspberry Pi with libmbus and our MBUS Master HAT....

Remarks

The default baud rate, default bus address and id of the device can be adjusted in mbusslave.h.

Consumption values ​​can be added or edited in the Encode_Payload() function. Be careful with MBUS codes of the "Device" domain. This code does not work or is already contained in the header of the protocol.

You can view the structure of the header in mbusslave.cpp and change parameters, e.g. the manufacturer ID, if necessary.

Libraries

Install the following library through Arduino Library Manager

MBUSPayload Library MBUSPayload Library

Credits

Based on the awesome work of OpenEnergyMonitor code by Trystan Lea, Glyn Hudson, and others

https://github.com/openenergymonitor/HeatpumpMonitor

and Bryan McLellan btm@loftninjas.org

https://github.com/btm/emonMbus

License

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

About

This demo program shows how to create your own consumption meter with an MBUS slave wing for feather boards or slave shield for Arduino MKR.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published