Add Vision Master 2.13 and 2.9 baords example

examples/LoRaWAN/LoRaWAN_GHTV3_Battery/LoRaWAN_GHTV3_Battery.ino

@@ -0,0 +1,216 @@
+/* Heltec Automation LoRaWAN communication example
+ *
+ * Function:
+ * 1. Upload Heltec_ESP32 node data to the server using the standard LoRaWAN protocol.
+ *  
+ * Description:
+ * 1. Communicate using LoRaWAN protocol.
+ * 
+ * HelTec AutoMation, Chengdu, China
+ * 成都惠利特自动化科技有限公司
+ * www.heltec.org
+ *
+ * this project also realess in GitHub:
+ * https://github.com/HelTecAutomation/Heltec_ESP32
+ 
+ * the development environment of this project in Arduion:
+ * https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
+ * */
+
+#include "LoRaWan_APP.h"
+#include "Wire.h"
+#include "GXHTC.h"
+// #include "Arduino.h"
+
+GXHTC gxhtc;
+
+uint8_t devEui[] = { 0x22, 0x32, 0x33, 0x00, 0x00, 0x88, 0x88, 0x03 };
+uint8_t appEui[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+uint8_t appKey[] = { 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88 };
+
+/* ABP para*/
+uint8_t nwkSKey[] = { 0x15, 0xb1, 0xd0, 0xef, 0xa4, 0x63, 0xdf, 0xbe, 0x3d, 0x11, 0x18, 0x1e, 0x1e, 0xc7, 0xda,0x85 };
+uint8_t appSKey[] = { 0xd7, 0x2c, 0x78, 0x75, 0x8c, 0xdc, 0xca, 0xbf, 0x55, 0xee, 0x4a, 0x77, 0x8d, 0x16, 0xef,0x67 };
+uint32_t devAddr =  ( uint32_t )0x007e6ae1;
+
+/*LoraWan channelsmask, default channels 0-7*/ 
+uint16_t userChannelsMask[6]={ 0x00FF,0x0000,0x0000,0x0000,0x0000,0x0000 };
+
+/*LoraWan region, select in arduino IDE tools*/
+LoRaMacRegion_t loraWanRegion = ACTIVE_REGION;
+
+/*LoraWan Class, Class A and Class C are supported*/
+DeviceClass_t  loraWanClass = CLASS_A;
+
+/*the application data transmission duty cycle.  value in [ms].*/
+uint32_t appTxDutyCycle = 15000;
+
+/*OTAA or ABP*/
+bool overTheAirActivation = true;//OTAA security is better
+
+/*ADR enable*/
+bool loraWanAdr = true;
+
+/* Indicates if the node is sending confirmed or unconfirmed messages */
+bool isTxConfirmed = true;
+
+/* Application port */
+uint8_t appPort = 2;
+/*!
+* Number of trials to transmit the frame, if the LoRaMAC layer did not
+* receive an acknowledgment. The MAC performs a datarate adaptation,
+* according to the LoRaWAN Specification V1.0.2, chapter 18.4, according
+* to the following table:
+*
+* Transmission nb | Data Rate
+* ----------------|-----------
+* 1 (first)       | DR
+* 2               | DR
+* 3               | max(DR-1,0)
+* 4               | max(DR-1,0)
+* 5               | max(DR-2,0)
+* 6               | max(DR-2,0)
+* 7               | max(DR-3,0)
+* 8               | max(DR-3,0)
+*
+* Note, that if NbTrials is set to 1 or 2, the MAC will not decrease
+* the datarate, in case the LoRaMAC layer did not receive an acknowledgment
+*/
+uint8_t confirmedNbTrials = 4;//
+
+/* Prepares the payload of the frame */
+static void prepareTxFrame( uint8_t port )
+{
+  /*appData size is LORAWAN_APP_DATA_MAX_SIZE which is defined in "commissioning.h".
+  *appDataSize max value is LORAWAN_APP_DATA_MAX_SIZE.
+  *if enabled AT, don't modify LORAWAN_APP_DATA_MAX_SIZE, it may cause system hanging or failure.
+  *if disabled AT, LORAWAN_APP_DATA_MAX_SIZE can be modified, the max value is reference to lorawan region and SF.
+  *for example, if use REGION_CN470, 
+  *the max value for different DR can be found in MaxPayloadOfDatarateCN470 refer to DataratesCN470 and BandwidthsCN470 in "RegionCN470.h".
+  */
+
+/* Initialize the sensor */
+  gxhtc.begin(20, 21);
+
+/* Read sensor data */
+  gxhtc.read_data();
+
+  Serial.print("Temperature:");
+  Serial.print(gxhtc.g_temperature);
+  Serial.print("  Humidity:");
+  Serial.println(gxhtc.g_humidity);
+
+  // ghxtc3();
+  unsigned char *puc;
+  appDataSize = 0;
+  appData[appDataSize++] = 0x04;
+  appData[appDataSize++] = 0x00;
+  appData[appDataSize++] = 0x0A;
+
+/* The upper four digits represent the subID, and the lower four digits represent significant decimal places */
+  appData[appDataSize++] =0X02;
+
+  //print out the values you read:
+  puc = (unsigned char *)(&gxhtc.g_temperature);
+  appData[appDataSize++] = puc[0];
+  appData[appDataSize++] = puc[1];
+  appData[appDataSize++] = puc[2];
+  appData[appDataSize++] = puc[3];
+
+/* The upper four digits represent the subID, and the lower four digits represent significant decimal places */
+  appData[appDataSize++] = 0x12;
+
+  //print out the values you read:
+  puc = (unsigned char *)(&gxhtc.g_humidity);
+  appData[appDataSize++] = puc[0];
+  appData[appDataSize++] = puc[1];
+  appData[appDataSize++] = puc[2];
+  appData[appDataSize++] = puc[3];
+
+  // read the analog / millivolts value for pin 1:
+  int analogValue = analogRead(1);
+  int analogVolts = analogReadMilliVolts(1);
+  Serial.printf("ADC analog value = %d\n",analogValue);
+  Serial.printf("ADC millivolts value = %d\n",analogVolts);
+
+/*Sensor parent ID and sensor length */
+  appData[appDataSize++] = 0x00;
+  appData[appDataSize++] = 0x00;
+  appData[appDataSize++] = 0x02;
+
+/*The higher 4 digits represent the subID, and the lower 4 digit represents the data type */
+ appData[appDataSize++] = (uint8_t)0X05;
+
+  //print out the values you read:
+  puc = (unsigned char *)(&analogValue);
+  appData[appDataSize++] = (uint8_t)0X05;
+  appData[appDataSize++] =((uint8_t)(int)analogValue  / 3.7);
+
+Wire.end();
+}
+
+/*if true, next uplink will add MOTE_MAC_DEVICE_TIME_REQ */
+void VextON(void)
+{
+  pinMode(Vext,OUTPUT);
+  digitalWrite(Vext, LOW);
+}
+
+void VextOFF(void) 
+{
+  pinMode(Vext,OUTPUT);
+  digitalWrite(Vext, HIGH);
+}
+
+void setup() {
+  gxhtc.begin(20, 21);
+  Serial.begin(115200);
+  analogReadResolution(12);
+  Mcu.begin(HELTEC_BOARD,SLOW_CLK_TPYE);
+  deviceState = DEVICE_STATE_INIT;
+  }
+
+void loop()
+{
+ switch( deviceState )
+  {
+    case DEVICE_STATE_INIT:
+    {
+#if(LORAWAN_DEVEUI_AUTO)
+      LoRaWAN.generateDeveuiByChipID();
+#endif
+      LoRaWAN.init(loraWanClass,loraWanRegion);
+      break;
+    }
+    case DEVICE_STATE_JOIN:
+    {
+      LoRaWAN.join();
+      break;
+    }
+    case DEVICE_STATE_SEND:
+    {
+      prepareTxFrame( appPort );
+      LoRaWAN.send();
+      deviceState = DEVICE_STATE_CYCLE;
+      break;
+    }
+    case DEVICE_STATE_CYCLE:
+    {
+      // Schedule next packet transmission
+      txDutyCycleTime = appTxDutyCycle + randr( -APP_TX_DUTYCYCLE_RND, APP_TX_DUTYCYCLE_RND );
+      LoRaWAN.cycle(txDutyCycleTime);
+      deviceState = DEVICE_STATE_SLEEP;
+      break;
+    }
+    case DEVICE_STATE_SLEEP:
+    {
+      LoRaWAN.sleep(loraWanClass);
+      break;
+    }
+    default:
+    {
+      deviceState = DEVICE_STATE_INIT;
+      break;
+    }
+  }
+}

examples/VME213/Deepsleep/Deepsleep.ino

@@ -0,0 +1,36 @@
+/* Heltec Automation adc  example
+ *
+ * Function:
+ * 1.ESP32 deep sleep achieves low power consumption
+ * 
+ * * Description:
+ * 1.Pin states can be set to achieve stable deep sleep.
+ * 
+ * Library url: https://github.com/HelTecAutomation/Heltec_ESP32
+ * Support: support@heltec.cn
+ *
+ * HelTec AutoMation, Chengdu, China
+ * 成都惠利特自动化科技有限公司
+ * https://www.heltec.org
+ *
+ * */
+
+#include "Arduino.h"
+
+#define wakeuptime  600 * 1000 * (uint64_t)1000 //Sleep time
+void setup()
+{
+    // digitalWrite(RADIO_NSS, HIGH);
+    // gpio_hold_en((gpio_num_t)RADIO_NSS);
+    // pinMode(RADIO_RESET, ANALOG);
+    // pinMode(RADIO_BUSY, ANALOG);
+    // pinMode(LORA_CLK, ANALOG);
+    // pinMode(LORA_MISO, ANALOG);
+    // pinMode(LORA_MOSI, ANALOG);
+    esp_sleep_enable_timer_wakeup(wakeuptime);
+    // esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
+    esp_deep_sleep_start();
+}
+void loop()
+{
+}