KukavarProxy is a TCP/IP server that enables reading and writing robot variables over the network.
- Developed by Massimiliano Fago & Davide Rosa IMTS - opensource release in january 2019
- Enhanced by Lionel du Peloux - february 2019
- Controlling Kuka Industrial Robots : Flexible Communication Interface JOpenShowVar PDF
To contribute to this project, you should fork the repo and submit pull-request. KukavarProxy is coded in Visual Basic 6.
To get a working development environment this is the steps you might follow :
- get a working installation of windows compatible with VB6 (mine is Win7 Pro x64)
- install VB6 IDE
- install VB6 SPS
Prior to load the VB project, you need to register the crosscom components. Do do that, copy
the content of the lib folder of this repo in the following directory :
C:\Windows\System32 (for a x86 os)
C:\Windows\SysWOW64 (for a x64 os)
Then, register the components with regsvr32 utility. Start a cmd prompt with administrator rights (start > search 'cmd' > right-click on 'cmd' program > select 'run as admin'). Then run the following lines in the cmd prompt :
C:\Windows> cd C:\Windows\SysWOW64
C:\Windows\SysWOW64> regsvr32 Cross.ocx
C:\Windows\SysWOW64> regsvr32 cswsk32.ocx
Now, you should be able to open the visual basic project (.vbp) and reference the components needed to build the project.
To install KukavarProxy just copy the KukavarProxy.exe somewhere on your robot contorler (desktop is fine). Doubleclick to launch the server.
The proxy reveives read/write requests from clients over the network. The proxy has the ip address of the robot and is listening on port 7000.
The format of the messages exchange between clients and proxy must follow this protocol :
Read Request Message Format
---------------------------
2 bytes Id (uint16)
2 bytes for content length (uint16)
1 byte for read/write mode (0=Read)
2 bytes for the variable name length (uint16)
N bytes for the variable name to be read (ASCII)
Write Request Message Format
---------------------------
2 bytes Id (uint16)
2 bytes for content length (uint16)
1 byte for read/write mode (1=Write)
2 bytes for the variable name length (uint16)
N bytes for the variable name to be written (ASCII)
2 bytes for the variable value length (uint16)
M bytes for the variable value to be written (ASCII)
Answer Message Format
---------------------------
2 bytes Id (uint16)
2 bytes for content length (uint16)
1 byte for read/write mode (0=Read, 1=Write, 2=ReadArray, 3=WriteArray)
2 bytes for the variable value length (uint16)
N bytes for the variable value (ASCII)
3 bytes for tail (000 on error, 011 on success)
