🐛 Fix G38 with Z, support 9 axes (MarlinFirmware#25691)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Infobitas · May 17, 2023 · a93b3c1 · a93b3c1
1 parent d75e016
commit a93b3c1
Show file tree

Hide file tree

Showing 2 changed files with 8 additions and 12 deletions.
diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
@@ -341,21 +341,21 @@
   #ifdef MANUAL_U_HOME_POS
     #define U_HOME_POS MANUAL_U_HOME_POS
   #else
-    #define U_HOME_POS (U_HOME_DIR < 0 ? U_MIN_POS : U_MAX_POS)
+    #define U_HOME_POS TERN(U_HOME_TO_MIN, U_MIN_POS, U_MAX_POS)
   #endif
 #endif
 #if HAS_V_AXIS
   #ifdef MANUAL_V_HOME_POS
     #define V_HOME_POS MANUAL_V_HOME_POS
   #else
-    #define V_HOME_POS (V_HOME_DIR < 0 ? V_MIN_POS : V_MAX_POS)
+    #define V_HOME_POS TERN(V_HOME_TO_MIN, V_MIN_POS, V_MAX_POS)
   #endif
 #endif
 #if HAS_W_AXIS
   #ifdef MANUAL_W_HOME_POS
     #define W_HOME_POS MANUAL_W_HOME_POS
   #else
-    #define W_HOME_POS (W_HOME_DIR < 0 ? W_MIN_POS : W_MAX_POS)
+    #define W_HOME_POS TERN(W_HOME_TO_MIN, W_MIN_POS, W_MAX_POS)
   #endif
 #endif
 

diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp
@@ -1107,17 +1107,13 @@ void Endstops::update() {
   #endif
 
   #if HAS_G38_PROBE // TODO (DerAndere): Add support for HAS_I_AXIS
-    #define _G38_OPEN_STATE TERN(G38_PROBE_AWAY, (G38_move >= 4), LOW)
     // For G38 moves check the probe's pin for ALL movement
-    if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, TERN(USES_Z_MIN_PROBE_PIN, MIN_PROBE, MIN))) != _G38_OPEN_STATE) {
-             if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, TERN(X_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(X_AXIS); }
-      #if HAS_Y_AXIS
-        else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, TERN(Y_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(Y_AXIS); }
-      #endif
-      #if HAS_Z_AXIS
-        else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, TERN(Z_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(Z_AXIS); }
-      #endif
+    if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, TERN(USES_Z_MIN_PROBE_PIN, MIN_PROBE, MIN))) == TERN1(G38_PROBE_AWAY, (G38_move < 4))) {
       G38_did_trigger = true;
+      #define _G38_SET(Q) | (stepper.axis_is_moving(_AXIS(Q)) << _AXIS(Q))
+      #define _G38_RESP(Q) if (moving[_AXIS(Q)]) { _ENDSTOP_HIT(Q, ENDSTOP); planner.endstop_triggered(_AXIS(Q)); }
+      const Flags<NUM_AXES> moving = { value_t(NUM_AXES)(0 MAIN_AXIS_MAP(_G38_SET)) };
+      MAIN_AXIS_MAP(_G38_RESP);
     }
   #endif