nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip

Add driver for Samsung S3FWRN5 NFC controller.
S3FWRN5 is using NCI protocol and I2C communication interface.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt

@@ -0,0 +1,27 @@
+* Samsung S3FWRN5 NCI NFC Controller
+
+Required properties:
+- compatible: Should be "samsung,s3fwrn5-i2c".
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip
+- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and
+  sleep/wakeup control
+
+Example:
+
+&hsi2c_4 {
+	status = "okay";
+	s3fwrn5@27 {
+		compatible = "samsung,s3fwrn5-i2c";
+
+		reg = <0x27>;
+
+		interrupt-parent = <&gpa1>;
+		interrupts = <3 0 0>;
+
+		s3fwrn5,en-gpios = <&gpf1 4 0>;
+		s3fwrn5,fw-gpios = <&gpj0 2 0>;
+	};
+};

MAINTAINERS

@@ -8871,6 +8871,12 @@ L:	linux-media@vger.kernel.org
 S:	Supported
 F:	drivers/media/i2c/s5k5baf.c
 
+SAMSUNG S3FWRN5 NFC DRIVER
+M:	Robert Baldyga <r.baldyga@samsung.com>
+L:	linux-nfc@lists.01.org (moderated for non-subscribers)
+S:	Supported
+F:	drivers/nfc/s3fwrn5
+
 SAMSUNG SOC CLOCK DRIVERS
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 M:	Tomasz Figa <tomasz.figa@gmail.com>

drivers/nfc/Kconfig

@@ -74,4 +74,5 @@ source "drivers/nfc/nfcmrvl/Kconfig"
 source "drivers/nfc/st21nfca/Kconfig"
 source "drivers/nfc/st-nci/Kconfig"
 source "drivers/nfc/nxp-nci/Kconfig"
+source "drivers/nfc/s3fwrn5/Kconfig"
 endmenu

drivers/nfc/Makefile

@@ -14,3 +14,4 @@ obj-$(CONFIG_NFC_TRF7970A)	+= trf7970a.o
 obj-$(CONFIG_NFC_ST21NFCA)  	+= st21nfca/
 obj-$(CONFIG_NFC_ST_NCI)	+= st-nci/
 obj-$(CONFIG_NFC_NXP_NCI)	+= nxp-nci/
+obj-$(CONFIG_NFC_S3FWRN5)	+= s3fwrn5/

drivers/nfc/s3fwrn5/Kconfig

@@ -0,0 +1,19 @@
+config NFC_S3FWRN5
+	tristate
+	---help---
+	  Core driver for Samsung S3FWRN5 NFC chip. Contains core utilities
+	  of chip. It's intended to be used by PHYs to avoid duplicating lots
+	  of common code.
+
+config NFC_S3FWRN5_I2C
+	tristate "Samsung S3FWRN5 I2C support"
+	depends on NFC_NCI && I2C
+	select NFC_S3FWRN5
+	default n
+	---help---
+	  This module adds support for an I2C interface to the S3FWRN5 chip.
+	  Select this if your platform is using the I2C bus.
+
+	  To compile this driver as a module, choose m here. The module will
+	  be called s3fwrn5_i2c.ko.
+	  Say N if unsure.

drivers/nfc/s3fwrn5/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for Samsung S3FWRN5 NFC driver
+#
+
+s3fwrn5-objs = core.o firmware.o nci.o
+s3fwrn5_i2c-objs = i2c.o
+
+obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o
+obj-$(CONFIG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o
+
+ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG

drivers/nfc/s3fwrn5/core.c

@@ -0,0 +1,219 @@
+/*
+ * NCI based driver for Samsung S3FWRN5 NFC chip
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <net/nfc/nci_core.h>
+
+#include "s3fwrn5.h"
+#include "firmware.h"
+#include "nci.h"
+
+#define S3FWRN5_NFC_PROTOCOLS  (NFC_PROTO_JEWEL_MASK | \
+				NFC_PROTO_MIFARE_MASK | \
+				NFC_PROTO_FELICA_MASK | \
+				NFC_PROTO_ISO14443_MASK | \
+				NFC_PROTO_ISO14443_B_MASK | \
+				NFC_PROTO_ISO15693_MASK)
+
+static int s3fwrn5_firmware_update(struct s3fwrn5_info *info)
+{
+	bool need_update;
+	int ret;
+
+	s3fwrn5_fw_init(&info->fw_info, "sec_s3fwrn5_firmware.bin");
+
+	/* Update firmware */
+
+	s3fwrn5_set_wake(info, false);
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_FW);
+
+	ret = s3fwrn5_fw_setup(&info->fw_info);
+	if (ret < 0)
+		return ret;
+
+	need_update = s3fwrn5_fw_check_version(&info->fw_info,
+		info->ndev->manufact_specific_info);
+	if (!need_update)
+		goto out;
+
+	dev_info(&info->ndev->nfc_dev->dev, "Detected new firmware version\n");
+
+	ret = s3fwrn5_fw_download(&info->fw_info);
+	if (ret < 0)
+		goto out;
+
+	/* Update RF configuration */
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI);
+
+	s3fwrn5_set_wake(info, true);
+	ret = s3fwrn5_nci_rf_configure(info, "sec_s3fwrn5_rfreg.bin");
+	s3fwrn5_set_wake(info, false);
+
+out:
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+	s3fwrn5_fw_cleanup(&info->fw_info);
+	return ret;
+}
+
+static int s3fwrn5_nci_open(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+
+	if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_COLD)
+		return  -EBUSY;
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI);
+	s3fwrn5_set_wake(info, true);
+
+	return 0;
+}
+
+static int s3fwrn5_nci_close(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+
+	s3fwrn5_set_wake(info, false);
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+
+	return 0;
+}
+
+static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+	int ret;
+
+	mutex_lock(&info->mutex);
+
+	if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_NCI) {
+		mutex_unlock(&info->mutex);
+		return -EINVAL;
+	}
+
+	ret = s3fwrn5_write(info, skb);
+	if (ret < 0)
+		kfree_skb(skb);
+
+	mutex_unlock(&info->mutex);
+	return ret;
+}
+
+static int s3fwrn5_nci_post_setup(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+	int ret;
+
+	ret = s3fwrn5_firmware_update(info);
+	if (ret < 0)
+		goto out;
+
+	/* NCI core reset */
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI);
+	s3fwrn5_set_wake(info, true);
+
+	ret = nci_core_reset(info->ndev);
+	if (ret < 0)
+		goto out;
+
+	ret = nci_core_init(info->ndev);
+
+out:
+	return ret;
+}
+
+static struct nci_ops s3fwrn5_nci_ops = {
+	.open = s3fwrn5_nci_open,
+	.close = s3fwrn5_nci_close,
+	.send = s3fwrn5_nci_send,
+	.post_setup = s3fwrn5_nci_post_setup,
+};
+
+int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
+	struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload)
+{
+	struct s3fwrn5_info *info;
+	int ret;
+
+	info = devm_kzalloc(pdev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->phy_id = phy_id;
+	info->pdev = pdev;
+	info->phy_ops = phy_ops;
+	info->max_payload = max_payload;
+	mutex_init(&info->mutex);
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+
+	s3fwrn5_nci_get_prop_ops(&s3fwrn5_nci_ops.prop_ops,
+		&s3fwrn5_nci_ops.n_prop_ops);
+
+	info->ndev = nci_allocate_device(&s3fwrn5_nci_ops,
+		S3FWRN5_NFC_PROTOCOLS, 0, 0);
+	if (!info->ndev)
+		return -ENOMEM;
+
+	nci_set_parent_dev(info->ndev, pdev);
+	nci_set_drvdata(info->ndev, info);
+
+	ret = nci_register_device(info->ndev);
+	if (ret < 0) {
+		nci_free_device(info->ndev);
+		return ret;
+	}
+
+	info->fw_info.ndev = info->ndev;
+
+	*ndev = info->ndev;
+
+	return ret;
+}
+EXPORT_SYMBOL(s3fwrn5_probe);
+
+void s3fwrn5_remove(struct nci_dev *ndev)
+{
+	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
+
+	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
+
+	nci_unregister_device(ndev);
+	nci_free_device(ndev);
+}
+EXPORT_SYMBOL(s3fwrn5_remove);
+
+int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb,
+	enum s3fwrn5_mode mode)
+{
+	switch (mode) {
+	case S3FWRN5_MODE_NCI:
+		return nci_recv_frame(ndev, skb);
+	case S3FWRN5_MODE_FW:
+		return s3fwrn5_fw_recv_frame(ndev, skb);
+	default:
+		return -ENODEV;
+	}
+}
+EXPORT_SYMBOL(s3fwrn5_recv_frame);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Samsung S3FWRN5 NFC driver");
+MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>");