---

Download

👉 Click here to download the latest version.

Get binaries for Windows in the releases section. For Linux or macOS consider using the PotatoNV-crossplatform.

User manual

Follow the video guide or read the manual below.

Make sure your device is compatible

0. Are you sure you're actually using a Huawei/Honor device?
1. Open the Settings → About phone. Check the CPU: it should be HiSilicon Kirin ***. If it is not your case (MediaTek, Qualcomm), then alas, your device is not supported. :(
2. Okay, now you know CPU model. It should be one of these modification:
   • Kirin 620
   • Kirin 650
   • Kirin 658
   • Kirin 659
   • Kirin 925
   • Kirin 935
   • Kirin 950
   • Kirin 960
3. Don't worry if CPU is not listed above – ask for a special bootloader for your device in the support chat if it's older than 4 years (date of manufacture is 2018 or earlier).
4. 100% incompatible CPUs: Kirin 710, 710A, 710F, 810, 970, 980, 985, 990 & newer.

Getting inside

The first step is the most difficult thing to do. You need to disassemble your device: this is necessary in order to access the contacts on the motherboard.

If you're not sure that you have enough experience to disassemble the device, then consider using paid software, that supports "software testpoint".

⚠️ I strongly recommend watching video manuals for disassembling your device.

⚠️ Be extremely careful with planar cables! These cables are used in tablets, as well as in phones with a fingerprint scanner on the back cover.

You will need: a hair dryer, a guitar pick or a plastic card, conductive tweezers and maybe a screwdriver.

1. Turn off the device.
2. Heat the back cover evenly with a hair dryer.
3. After a couple of minutes, try to stick the plastic card into the corner between case and lid, try to lift the edge and then deepen the card.
4. Move around the perimeter of the back cover, peeling off glue.
5. Now you can remove the back cover.

Entering download mode

It's time to Google. You need to find the location of a special point on the motherboard – testpoint.

💡 If you are wondering why you need to do something with the unfortunate testpoint, then read the contents of the spoiler below.

To search, use the model name before the hyphen + "testpoint". For example for Honor 9 Lite (LLD-L31) you should Google "lld testpoint".

An example how a typical testpoint photo looks like.

The marks may vary:

1. Only one point is marked in the photo.
2. In the photo, a line is drawn between the point and the metal shield.
3. In the photo, a line is drawn between two points.

Here you will need sleight of hand: try to short-circuit the point and the metal shield (in option 1 and 2), or short-circuit both points (option 3) with tweezers. Without removing the tweezers, connect the USB cable to the computer.

After 3 seconds, the tweezers can be removed.

Open the "Device Manager" – you should see an unknown device named USB SER, or Serial Port HUAWEI USB COM 1.0.

If the device has not been detected, make sure you are using a good cable, the tweezers are not a dielectric, and you are shorting the desired point.

Unlocking the bootloader

• Install HiSuite.
• Install Huawei Testpoint Drivers.
• Download the latest release of PotatoNV.
• Start PotatoNV.

💡 All bootloaders are flashing to RAM, so an incorrect bootloader cannot harm the device.

💡 Disable FBLOCK checkbox disables a special securtiy check. That modification allows you to flash/erase secure partitions or execute oem commands, that are not available with normal unlocking by unlock code [USERLOCK].

⚠️ FBLOCK unlocking works correctly only on devices with Kirin 960 or Kirin 65x. Disabling this option can cause serious problems on legacy devices.

Okay, now refer to this table and select the appropriate bootloader.

Press the Start button. 🪄

The procedure will take no more than a minute. The program should write a new unlock code, keep it in a safe place.

Reboot your device to fastboot mode and execute following command on the host machine:

fastboot oem unlock YOUR_CODE_HERE

have fun.

How it works

Even before creating PotatoNV, @TishSerg discovered that unlock key can be rewritten with the SHA256 hash of the desired key to the USRKEY property. However, to access NVME (a raw partition that stores stuff like serial number, device traits, etc.), a user should flash custom recovery or gain temporary root privileges. But both methods are complex and are not guaranteed to work. After researching the legacy bootloader of some Huawei devices, I've found a nve command, which allows to read or write any property in the NVME partition. Of course, this command requires an unlocked bootloader. So it remains to find a way to quickly unlock the bootloader. The way out is quite simple - use the bootloader from the board software.

The program uploads a special "USB bootloader" (exported from the board software) through the DOWNLOAD_VCOM mode. VCOM is smth like EDL on Qualcomm devices: it can be triggered by a system failure or by shorting testpoint. After uploading the bootloader, the device should switch to the fastboot mode. The "USB bootloader" has an important trait: it's unlocked out-of-the-box, so it allows to execute any command.

So, we're just going to send a command through the USB bulk interface to write SHA256 hash to USRKEY and reboot the device.

That's it.

Tested devices

Device	Model	Bootloader
Huawei P8 Lite (2015)	ALE	Kirin 620
Huawei Y6II	CAM	Kirin 620
Honor 5C / 7 Lite	NEM	Kirin 65x (A)
Honor 7X	BND	Kirin 65x (A)
Honor 9 Lite	LLD	Kirin 65x (A)
Huawei MediaPad T5	AGS2	Kirin 65x (A)
Huawei Nova 2	PIC	Kirin 65x (A)
Huawei P10 Lite	WAS	Kirin 65x (A)
Huawei P20 Lite / Nova 3e	ANE	Kirin 65x (A)
Huawei P8 Lite (2017)	PRA	Kirin 65x (A)
Huawei P9 Lite	VNS	Kirin 65x (A)
Huawei Y9 (2018)	FLA	Kirin 65x (A)
Huawei MediaPad M5 Lite	BAH2	Kirin 65x (B)
Huawei Nova 2i / Mate 10 Lite	RNE	Kirin 65x (B)
Huawei P Smart 2018	FIG	Kirin 65x (B)
Honor 6 Plus	PE	Kirin 925
Huawei P8	GRA	Kirin 935
Honor 8 Pro / V9	DUK	Kirin 950
Honor 8	FRD	Kirin 950
Huawei P9 Standart	EVA	Kirin 950
Honor 9	STF	Kirin 960
Huawei Mate 9 Pro	LON	Kirin 960
Huawei Mate 9	MHA	Kirin 960
Huawei MediaPad M5	CMR	Kirin 960
Huawei Nova 2s	HWI	Kirin 960
Huawei P10	VTR	Kirin 960

Donate

It would be much appreciated if you want to make a small donation to support my work!

All my accounts are blocked due to the political situation. So nvm! :)

Thank you, Martin, Moisés, Tibor, Emanuele & all those I've forgotten (sorry!).

Sponsored by JetBrains

License

Logo by Icons8.

All bootloaders are Huawei Technologies Co., Ltd. property.

This project is not affiliated with Huawei.

---

Unlock tool for Huawei devices on Kirin SoC. Copyright (C) 2020 mashed-potatoes

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.