HID: uclogic: Add support for XP-PEN Deco Pro SW

The XP-PEN Deco Pro SW is a UGEE v2 device with a frame with 8 buttons,
a bitmap dial and a mouse; however, the UCLOGIC_MOUSE_FRAME_QUIRK is
required because it reports an incorrect frame type. Its pen has 2
buttons, supports tilt and pressure.

It can be connected by USB cable or using a USB Bluetooth dongle to use
it in wireless mode. When it is connected using the dongle, the device
battery is used to power it.

All the pieces to support it are already in place. Add its ID and
quirks in order to support the device.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>

drivers/hid/hid-ids.h

@@ -1290,6 +1290,7 @@
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01 0x0042
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L 0x0935
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S 0x0909
+#define USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW 0x0933
 #define USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06 0x0078
 #define USB_DEVICE_ID_UGEE_TABLET_G5 0x0074
 #define USB_DEVICE_ID_UGEE_TABLET_EX07S 0x0071

drivers/hid/hid-uclogic-core.c

@@ -510,6 +510,9 @@ static const struct hid_device_id uclogic_devices[] = {
  USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L) },
  { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
  USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
+ USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
+ .driver_data = UCLOGIC_MOUSE_FRAME_QUIRK | UCLOGIC_BATTERY_QUIRK },
  { HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
  USB_DEVICE_ID_UGEE_XPPEN_TABLET_STAR06) },
  { }

drivers/hid/hid-uclogic-params.c

@@ -1669,6 +1669,8 @@ int uclogic_params_init(struct uclogic_params *params,
  USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_L):
  case VID_PID(USB_VENDOR_ID_UGEE,
  USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_S):
+ case VID_PID(USB_VENDOR_ID_UGEE,
+ USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW):
  rc = uclogic_params_ugee_v2_init(&p, hdev);
  if (rc != 0)
  goto cleanup;