Oscillator: Add Oscillator_SMD_DiodesPericom_FN-4Pin_7.0x5.0mm

[gmsotavio]

Manf. Doc: https://www.diodes.com/assets/Datasheets/FN_3-3V.pdf

---

All contributions to the kicad library must follow the KiCad library convention

Thanks for creating a pull request to contribute to the KiCad libraries! To speed up integration of your PR, please check the following items:

• Provide a URL to a datasheet for the footprint(s) you are contributing
• An example screenshot image is very helpful
• If there are matching symbol or 3D model pull requests, provide link(s) as appropriate
• Check the output of the Travis automated check scripts - fix any errors as required
• Give a reason behind any intentional library convention rule violation.

[evanshultz]

1. Get rid of the "Pericom" part of the footprint name.
2. The fab layer needs a pin 1 mark. This would be easy enough to do with straight sides and one bevel instead of rounded corners, but you can keep the rounded corners too. What ideas do you have?
3. Courtyard should be 0.25mm bigger than the part body or pads. It seems you used 0.5mm? http://kicad-pcb.org/libraries/klc/F5.3/ mentioned canned crystals but this can use the normal SMD rule.

[gmsotavio]

@evanshultz, thanks for the suggestions!

Get rid of the "Pericom" part of the footprint name.

Done.

The fab layer needs a pin 1 mark. This would be easy enough to do with straight sides and one bevel instead of rounded corners, but you can keep the rounded corners too. What ideas do you have?

Done. I have kept the rounded corners for a while, but something says me that you prefer straight sides with no rounded corners. Drop me a line and I will change this. I have no personal preference. You decide!

Courtyard should be 0.25mm bigger than the part body or pads. It seems you used 0.5mm? http://kicad-pcb.org/libraries/klc/F5.3/ mentioned canned crystals but this can use the normal SMD rule.

Fixed! In my mind I was drawing a crystal but it is an SMD Oscillator.

[evanshultz]

Thanks! The pin 1 fab line mark varies a lot in this library so we'll go with it. Eventually there could be a standard but that time is not now.