ICSNPP-Modbus

Industrial Control Systems Network Protocol Parsers (ICSNPP) - Modbus.

Overview

ICSNPP-Modbus is a Zeek package that extends the logging capabilities of Zeek's default Modbus protocol parser.

Zeek's default Modbus parser logs Modbus traffic to modbus.log. This log file remains unchanged. This package extends Modbus logging capability by adding four new Modbus log files:

• modbus_detailed.log
• modbus_mask_write_register.log
• modbus_read_write_multiple_registers.log
• modbus_read_device_identification.log

For additional information on these log files, see the Logging Capabilities section below.

Installation

Package Manager

This script is available as a package for Zeek Package Manger

zkg refresh
zkg install icsnpp-modbus

If ZKG is configured to load packages (see @load packages in quickstart guide), this script will automatically be loaded and ready to go. ZKG Quickstart Guide

If users are not using site/local.zeek or another site installation of Zeek and want to run this script on a packet capture, they can add icsnpp-modbus to the command to run this script on the packet capture:

git clone https://github.com/cisagov/icsnpp-modbus.git
zeek -Cr icsnpp-modbus/tests/traces/modbus_example.pcap icsnpp-modbus

Manual Install

To install this script manually, clone this repository and copy the contents of the scripts directory into ${ZEEK_INSTALLATION_DIR}/share/zeek/site/icsnpp-modbus.

git clone https://github.com/cisagov/icsnpp-modbus.git
zeek_install_dir=$(dirname $(dirname `which zeek`))
cp -r icsnpp-modbus/scripts/ $zeek_install_dir/share/zeek/site/icsnpp-modbus

If using a site deployment, simply add echo @load icsnpp-modbus to the local.site file.

If users are not using site/local.zeek or another site installation of Zeek and want to run this package on a packet capture, they can add icsnpp-modbus to the command to run this plugin's scripts on the packet capture:

zeek -Cr icsnpp-modbus/tests/traces/modbus_example.pcap icsnpp-modbus

Logging Capabilities

Detailed Modbus Field Log (modbus_detailed.log)

Overview

This log captures Modbus header and data fields and logs them to modbus_detailed.log.

This log file contains the functions (read/write), count, addresses, and values of Modbus coils, discrete inputs, input registers, and holding registers.

A "network_direction" meta-data field is also included in the log. The "network_direction" column specifies whether the message was a request or a response message. If an exception arises in the Modbus data, the exception code will be logged in the "values" field.

Fields Captured

Field	Type	Description
ts	time	Timestamp
uid	string	Unique ID for this connection
id	conn_id	Default Zeek connection info (IP addresses, ports)
is_orig	bool	True if the packet is sent from the originator
source_h	address	Source IP address (see Source and Destination Fields)
source_p	port	Source port (see Source and Destination Fields)
destination_h	address	Destination IP address (see Source and Destination Fields)
destination_p	port	Destination port (see Source and Destination Fields)
tid	count	Modbus transaction identifier
uint	count	Modbus terminal unit identifier
func	string	Modbus function code
request_response	string	REQUEST or RESPONSE
address	count	Starting address of value(s) field
quantity	count	Number of addresses/values read or written to
values	string	Value(s) of coils, discrete_inputs, or registers read/written to

Mask Write Register Log (modbus_mask_write_register.log)

Overview

This log captures the fields of the Modbus mask_write_register function (function code 0x16) and logs them to modbus_mask_write_register.log.

Fields Captured

Field	Type	Description
ts	time	Timestamp
uid	string	Unique ID for this connection
id	conn_id	Default Zeek connection info (IP addresses, ports)
is_orig	bool	True if the packet is sent from the originator
source_h	address	Source IP address (see Source and Destination Fields)
source_p	port	Source port (see Source and Destination Fields)
destination_h	address	Destination IP address (see Source and Destination Fields)
destination_p	port	Destination port (see Source and Destination Fields)
tid	count	Modbus transaction identifier
uint	count	Modbus terminal unit identifier
func	string	Modbus function code
request_response	string	REQUEST or RESPONSE
address	count	Address of the target register
and_mask	count	Boolean 'and' mask to apply to the target register
or_mask	count	Boolean 'or' mask to apply to the target register

Read Write Multiple Registers Log (modbus_read_write_multiple_registers.log)

Overview

This log captures the fields of the Modbus read/write multiple registers function (function code 0x17) and logs them to modbus_read_write_multiple_registers.log.

Fields Captured

Field	Type	Description
ts	time	Timestamp
uid	string	Unique ID for this connection
id	conn_id	Default Zeek connection info (IP addresses, ports)
is_orig	bool	True if the packet is sent from the originator
source_h	address	Source IP address (see Source and Destination Fields)
source_p	port	Source port (see Source and Destination Fields)
destination_h	address	Destination IP address (see Source and Destination Fields)
destination_p	port	Destination port (see Source and Destination Fields)
tid	count	Modbus transaction identifier
uint	count	Modbus terminal unit identifier
func	string	Modbus function code
request_response	string	REQUEST or RESPONSE
write_start_address	count	Starting address of registers to be written
write_registers	string	Register values written
read_start_address	count	Starting address of the registers to read
read_quantity	count	Number of registers to read in
read_registers	string	Register values read

Read Device Identification Log (modbus_read_device_identification.log)

Overview

This log captures the fields of the Modbus encapsulated interface transport function (function code 0x2B) when the MEI type is set to 14 (0x0E) and logs them to modbus_read_device_identification.log.

Note: this log is only produced in Zeek versions 6.1 and above

Fields Captured

Field	Type	Description
ts	time	Timestamp
uid	string	Unique ID for this connection
id	conn_id	Default Zeek connection info (IP addresses, ports)
is_orig	bool	True if the packet is sent from the originator
source_h	address	Source IP address (see Source and Destination Fields)
source_p	port	Source port (see Source and Destination Fields)
destination_h	address	Destination IP address (see Source and Destination Fields)
destination_p	port	Destination port (see Source and Destination Fields)
tid	count	Modbus transaction identifier
uint	count	Modbus terminal unit identifier
func	string	Modbus function code
request_response	string	REQUEST or RESPONSE
mei_type	string	MEI Type - Always READ-DEVICE-IDENTIFICATION
conformity_level_code	string	Conformity Level Code
conformity_level	string	Conformity Level
device_id_code	count	Device ID Code
object_id_code	string	Object ID Code
object_id	string	Object ID
object_value	string	Object Value

Source and Destination Fields

Overview

Zeek's typical behavior is to focus on and log packets from the originator and not log packets from the responder. However, most ICS protocols contain useful information in the responses, so the ICSNPP parsers log both originator and responses packets. Zeek's default behavior, defined in its id struct, is to never switch these originator/responder roles which leads to inconsistencies and inaccuracies when looking at ICS traffic that logs responses.

The default Zeek id struct contains the following logged fields:

• id.orig_h (Original Originator/Source Host)
• id.orig_p (Original Originator/Source Port)
• id.resp_h (Original Responder/Destination Host)
• id.resp_p (Original Responder/Destination Port)

Additionally, the is_orig field is a boolean field that is set to T (True) when the id_orig fields are the true originators/source and F (False) when the id_resp fields are the true originators/source.

To not break existing platforms that utilize the default id struct and is_orig field functionality, the ICSNPP team has added four new fields to each log file instead of changing Zeek's default behavior. These four new fields provide the accurate information regarding source and destination IP addresses and ports:

• source_h (True Originator/Source Host)
• source_p (True Originator/Source Port)
• destination_h (True Responder/Destination Host)
• destination_p (True Responder/Destination Port)

The pseudocode below shows the relationship between the id struct, is_orig field, and the new source and destination fields.

if is_orig == True
    source_h == id.orig_h
    source_p == id.orig_p
    destination_h == id.resp_h
    destination_p == id.resp_p
if is_orig == False
    source_h == id.resp_h
    source_p == id.resp_p
    destination_h == id.orig_h
    destination_p == id.orig_p

Example

The table below shows an example of these fields in the log files. The first log in the table represents a Modbus request from 192.168.1.10 -> 192.168.1.200 and the second log represents a Modbus reply from 192.168.1.200 -> 192.168.1.10. As shown in the table below, the id structure lists both packets as having the same originator and responder, but the source and destination fields reflect the true source and destination of these packets.

id.orig_h	id.orig_p	id.resp_h	id.resp_p	is_orig	source_h	source_p	destination_h	destination_p
192.168.1.10	47785	192.168.1.200	502	T	192.168.1.10	47785	192.168.1.200	502
192.168.1.10	47785	192.168.1.200	502	F	192.168.1.200	502	192.168.1.10	47785

Coverage

See Logging Capabilities for detailed information of the parser coverage.

The Modbus protocol contains a few vendor and product specific functions. These vendor/product specific functions are not included in this parser. All coverage details in this section include information and statistics based on the basic/default Modbus protocol.

General/Header Logging

The general log file for Modbus (modbus.log) is produced by Zeek's default Modbus parser and is not modified by this parser extension.

Detailed Logging

Detailed logging for 11 Modbus functions are logged in the detailed log file (modbus_detailed.log), 1 Modbus function is logged in the mask write register log file (modbus_mask_write_register.log), 1 Modbus function is logged in the read write multiple registers log file (modbus_read_write_multiple_registers.log), and 1 Modbus function is logged in the read device identification log file (modbus_read_device_identification.log). The other, much less common, 5 Modbus functions do not contain detailed logging, therefore, ~74% (14/19) of the default Modbus functions contain detailed logging.

ICSNPP Packages

All ICSNPP Packages:

• ICSNPP

Full ICS Protocol Parsers:

• BACnet
  • Full Zeek protocol parser for BACnet (Building Control and Automation)
• BSAP
  • Full Zeek protocol parser for BSAP (Bristol Standard Asynchronous Protocol) over IP
  • Full Zeek protocol parser for BSAP Serial comm converted using serial tap device
• Ethercat
  • Full Zeek protocol parser for Ethercat
• Ethernet/IP and CIP
  • Full Zeek protocol parser for Ethernet/IP and CIP
• Genisys
  • Full Zeek protocol parser for Genisys
• OPCUA-Binary
  • Full Zeek protocol parser for OPC UA (OPC Unified Architecture) - Binary
• S7Comm
  • Full Zeek protocol parser for S7comm, S7comm-plus, and COTP
• Synchrophasor
  • Full Zeek protocol parser for Synchrophasor Data Transfer for Power Systems (C37.118)
• Profinet IO CM
  • Full Zeek protocol parser for Profinet I/O Context Manager

Updates to Zeek ICS Protocol Parsers:

• DNP3
  • DNP3 Zeek script extending logging capabilities of Zeek's default DNP3 protocol parser
• Modbus
  • Modbus Zeek script extending logging capabilities of Zeek's default Modbus protocol parser

License

Copyright 2023 Battelle Energy Alliance, LLC. Released under the terms of the 3-Clause BSD License (see LICENSE.txt).