Zigbeet2mqtt dose not start... status=1/failure

[thomas1977mg]

Dear Koen,

today I have updated the device and after that I could not get the system running.
Zigbee2MQTT will not start and I don´t have a solution for it. What could it be?

I am getting really nervous, because I have a big system running and need the devices running.
Thanks for your kind support.
Thomas

---

https://pastebin.com/K7Ba6Dw2

---

[Koenkk]

Can you post your configuration.yaml?

[thomas1977mg]

Dear Koen, thanks for your quick reply... here it is w/o the devices: # Home Assistant integration (MQTT discovery) homeassistant: false permit_join: true mqtt: base_topic: zigbee2mqtt server: 'mqtt://192.168.178.32:1883' broker: '192.168.178.32' # server: 'mqtt://192.168.178.32:1900' #server: 'mqtt://localhost' serial: port: >- /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D9DBB6-if00 devices: advanced: channel: 11 I have also installed again node.js to come above 10. BEfore it was 8.xx - but without success. Thanks, Thomas Am Di., 18. Dez. 2018 um 22:45 Uhr schrieb Koen Kanters < notifications@github.com>:

…

Can you post your configuration.yaml? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#727 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ApL-We7QfZ7g0yCtM0ZtmcmUKUn4UFIuks5u6WICgaJpZM4ZZE9q> .

-- ####################################### Thomas Jacobs Bücher Straße 30, 41844 Wegberg Tel: +49 170 2005520 | eMail: thomasjacobs1977@gmail.com <Klick> <https://de.linkedin.com/pub/thomas-jacobs/67/a48/44a> <Klick> <http://www.xing.com/profile/Thomas_Jacobs>

[Koenkk]

Is your port indented with 2 spaces?

[thomas1977mg]

Dear Koen, I am not 100% sure what you mean. I have on FHEM two broker running. One @ 1883 and a newer one at 1900. But this were already running since a couple of days. I used to change it in the yaml forth and back w/o success. The problem started yesterday after updating the system following your instruction manual. Best regards, Thomas Am Mi., 19. Dez. 2018 um 08:08 Uhr schrieb Koen Kanters < notifications@github.com>:

…

Is your port indented with 2 spaces? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#727 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ApL-WdjMLxPSuf-OTi7vqZG_4N7AxtB0ks5u6eXkgaJpZM4ZZE9q> .

-- ####################################### Thomas Jacobs Bücher Straße 30, 41844 Wegberg Tel: +49 170 2005520 | eMail: thomasjacobs1977@gmail.com <Klick> <https://de.linkedin.com/pub/thomas-jacobs/67/a48/44a> <Klick> <http://www.xing.com/profile/Thomas_Jacobs>

[thomas1977mg]

One additional information: node --version v10.14.2 npm --version 6.4.1 Am Mi., 19. Dez. 2018 um 20:38 Uhr schrieb Thomas Jacobs < thomasjacobs1977@gmail.com>:

…

Dear Koen, I am not 100% sure what you mean. I have on FHEM two broker running. One @ 1883 and a newer one at 1900. But this were already running since a couple of days. I used to change it in the yaml forth and back w/o success. The problem started yesterday after updating the system following your instruction manual. Best regards, Thomas Am Mi., 19. Dez. 2018 um 08:08 Uhr schrieb Koen Kanters < ***@***.***>: > Is your port indented with 2 spaces? > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#727 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ApL-WdjMLxPSuf-OTi7vqZG_4N7AxtB0ks5u6eXkgaJpZM4ZZE9q> > . > -- ####################################### Thomas Jacobs Bücher Straße 30, 41844 Wegberg Tel: +49 170 2005520 | eMail: ***@***.*** <Klick> <https://de.linkedin.com/pub/thomas-jacobs/67/a48/44a> <Klick> <http://www.xing.com/profile/Thomas_Jacobs>

-- ####################################### Thomas Jacobs Bücher Straße 30, 41844 Wegberg Tel: +49 170 2005520 | eMail: thomasjacobs1977@gmail.com <Klick> <https://de.linkedin.com/pub/thomas-jacobs/67/a48/44a> <Klick> <http://www.xing.com/profile/Thomas_Jacobs>

[Koenkk]

Add 2 spaces before port in configuration.yaml.

[thomas1977mg]

Dear Koen... you are the worlds greatest! It works again....! Many thanks... Thomas Am Mi., 19. Dez. 2018 um 21:05 Uhr schrieb Koen Kanters < notifications@github.com>:

…

Add 2 spaces before port in configuration.yaml. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#727 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ApL-WYNMIZBxW54d_UM2op-o0w36g00rks5u6pwYgaJpZM4ZZE9q> .

-- ####################################### Thomas Jacobs Bücher Straße 30, 41844 Wegberg Tel: +49 170 2005520 | eMail: thomasjacobs1977@gmail.com <Klick> <https://de.linkedin.com/pub/thomas-jacobs/67/a48/44a> <Klick> <http://www.xing.com/profile/Thomas_Jacobs>

[Koenkk]

great!