Skip to content

W5500 ethernet module driver written in rust

License

Notifications You must be signed in to change notification settings

LechevSpace/w5500

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

W5500 Driver

This crate is a driver for the WIZnet W5500 chip. The W5500 chip is a hardwired TCP/IP embedded Ethernet controller that enables embedded systems using SPI (Serial Peripheral Interface) to access the LAN. It is one of the more popular ethernet modules on Arduino platforms.

Build Status License Crates.io Documentation PRs Welcome

Embedded-HAL

Embedded-HAL is a standard set of traits meant to permit communication between MCU implementations and hardware drivers like this one. Any microcontroller that implements the spi::FullDuplex<u8> interface can use this driver.

Example Usage

Below is a basic example of sending UDP packets to a remote host. An important thing to confirm is the configuration of the SPI implementation. It must be set up to work as the W5500 chip requires. That configuration is as follows:

  • Data Order: Most significant bit first
  • Clock Polarity: Idle low
  • Clock Phase: Sample leading edge
  • Clock speed: 33MHz maximum

Initialization and usage of owned Device:

    let mut spi = ...; // SPI interface to use
    let mut cs : OutputPin = ...; // chip select

    // alternative                     FourWireRef::new(&mut spi, &mut cs)
    let device = UninitializedDevice::new(FourWire::new(spi, cs))
            .initialize_manual(
                    MacAddress::new(0, 1, 2, 3, 4, 5),
                    Ipv4Addr::new(192, 168, 86, 79),
                    Mode::default()
            ).unwrap();

    let socket = device.socket();
    socket.connect(
        SocketAddr::new(IpAddr::V4(Ipv4Addr::new(192, 168, 86, 38)), 8000),
    ).unwrap();
    block!(interface.send(&mut socket, &[104, 101, 108, 108, 111, 10]));
    device.close(socket);

    // optional
    let (spi_bus, inactive_device) = device.deactivate();

Usage of borrowed SPI-Bus and previously initialized Device:

    let mut spi = ...; // SPI interface to use
    let mut cs: OutputPin = ...; // chip select

    let mut device: Option<InactiveDevice<..>> = ...; // maybe: previously initialized device
    let mut socket: Option<Socket> = ...; // maybe: previously opened socket
    
    if let (Some(socket), Some(device)) = (socket.as_mut(), device.as_mut()) {
        let mut buffer = [0u8; 1024];
        match device
            // scoped activation & usage of the SPI bus without move
            .activate_ref(FourWireRef::new(&mut spi, &mut cs))
            .receive(socket, &mut buffer)
        {
            Ok(..) => todo!(),
            Err(..) => todo!(),
        }
    }

Todo

In no particular order, things to do to improve this driver.

  • Add support for TCP server implementations
  • Add support for DHCP

About

W5500 ethernet module driver written in rust

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Sponsor this project

 

Packages

No packages published

Languages

  • Rust 100.0%