INSTALL.md: reformat in Markdown

INSTALL.md

@@ -2,51 +2,58 @@ INSTALLATION PROCEDURE
 ======================
 
 Dependencies:
-"""""""""""""
+-------------
 
 You need to install:
 - meson
 - flex
 - libusb-1
 
 Installation from source:
-"""""""""""""""""""""""""
+-------------------------
 
 Get the ccid-x.y.z.tar.xz archive from https://ccid.apdu.fr/files/ and do:
 
-$ tar xjvf ccid-*.tar.xz
-$ cd ccid-*
-$ meson setup builddir
-$ cd builddir
-$ meson compile
-$ sudo meson install
+```
+tar xjvf ccid-*.tar.xz
+cd ccid-*
+meson setup builddir
+cd builddir
+meson compile
+sudo meson install
+```
 
 Installation from git repo:
-"""""""""""""""""""""""""""
+---------------------------
 
-$ git clone https://salsa.debian.org/rousseau/CCID.git
-$ cd CCID
-$ meson setup builddir
-$ cd builddir
-$ meson compile
-$ sudo meson install
+```
+git clone https://salsa.debian.org/rousseau/CCID.git
+cd CCID
+meson setup builddir
+cd builddir
+meson compile
+sudo meson install
+```
 
 building serial reader driver
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-----------------------------
 
 A serial CCID reader can also be connected on a serial port. By default
 the serial driver is not built. You must explicitly do:
 
-$ meson setup builddir -Dserial=true
-$ cd builddir
-$ meson compile
+```
+meson setup builddir -Dserial=true
+cd builddir
+meson compile
+```
 
 configuring the driver for the serial reader
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+--------------------------------------------
 
-You have to create a file in the /etc/reader.conf.d/ directory. The file
+You have to create a file in the `/etc/reader.conf.d/` directory. The file
 should contain something like:
 
+```
 # Gemalto reader with serial communication
 #  - n is the serial port to use n in [0..3]
 #  - reader is the reader name. It is needed for multi-slot readers.
@@ -64,6 +71,7 @@ should contain something like:
 FRIENDLYNAME      "GemPC Twin serial"
 DEVICENAME        /dev/ttyS0
 LIBPATH           /usr/lib/pcsc/drivers/serial/libccidtwin.so
+```
 
 You will have to adapt the library path to your configuration.
 
@@ -79,14 +87,16 @@ DEVICENAME field. Supported values are:
 - SEC1210 for Microchip SEC1210
 
 You will then have something like:
+```
 DEVICENAME /dev/ttyS0:GemPCPinPad
+```
 
-/dev/ttyS0 (DEVICENAME field) is the first serial port under Linux
+`/dev/ttyS0` (DEVICENAME field) is the first serial port under Linux
 (known as COM1 under DOS/Windows). Of course if your reader is connected
 to another serial port you have to adapt that.
 
 
 Binary installation:
-""""""""""""""""""""
+--------------------
 
 Contact your distribution support.