✨ Board Thermistor

MarlinFirmware/Marlin#22279
MarlinFirmware · Jul 10, 2021 · 1f38de7 · 1f38de7
1 parent b8f8bce
commit 1f38de7
Show file tree

Hide file tree

Showing 521 changed files with 8,996 additions and 4,961 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -474,7 +474,7 @@
  * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
  * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  *
- * Custom / Dummy / Other
+ * Custom/Dummy/Other Thermal Sensors
  * ------
  * 0 : not used
  * 1000 : Custom - Specify parameters in Configuration_adv.h
@@ -496,6 +496,7 @@
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
+#define TEMP_SENSOR_BOARD 0
 #define TEMP_SENSOR_REDUNDANT 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
@@ -528,17 +529,11 @@
  * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
  * the Bed sensor (-1) will disable bed heating/monitoring.
  *
- * Use the following to select temp sensors:
- * -5 : Cooler
- * -4 : Probe
- * -3 : not used
- * -2 : Chamber
- * -1 : Bed
- * 0-7 : E0 through E7
+ * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
  */
 #if TEMP_SENSOR_REDUNDANT
- #define TEMP_SENSOR_REDUNDANT_SOURCE  1 // The sensor that will provide the redundant reading.
- #define TEMP_SENSOR_REDUNDANT_TARGET  0 // The sensor that we are providing a redundant reading for.
+ #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
+ #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
  #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
 #endif
 

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -125,6 +125,12 @@
  #define PROBE_BETA 3950 // Beta value
 #endif
 
+#if TEMP_SENSOR_BOARD == 1000
+ #define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
+ #define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
+ #define BOARD_BETA 3950 // Beta value
+#endif
+
 #if TEMP_SENSOR_REDUNDANT == 1000
  #define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
@@ -224,6 +230,18 @@
  #endif
 #endif
 
+//
+// Motherboard Sensor options
+//
+#if TEMP_SENSOR_BOARD
+ #define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below.
+ #define BOARD_MINTEMP 8 // (°C)
+ #define BOARD_MAXTEMP 70 // (°C)
+ #ifndef TEMP_BOARD_PIN
+ //#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file.
+ #endif
+#endif
+
 //
 // Laser Coolant Flow Meter
 //
@@ -480,16 +498,20 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
- //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
- //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
- //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
- #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
- #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
- #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
- #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
- //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
+ //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
+ //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
+ //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
+ #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
+ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
+ #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
+ #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
+
+ // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
+ //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
+
+ //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
  #if ENABLED(CONTROLLER_FAN_EDITABLE)
- #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
+ #define CONTROLLER_FAN_MENU  // Enable the Controller Fan submenu
  #endif
 #endif
 

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -475,7 +475,7 @@
  * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
  * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  *
- * Custom / Dummy / Other
+ * Custom/Dummy/Other Thermal Sensors
  * ------
  * 0 : not used
  * 1000 : Custom - Specify parameters in Configuration_adv.h
@@ -497,6 +497,7 @@
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
+#define TEMP_SENSOR_BOARD 0
 #define TEMP_SENSOR_REDUNDANT 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
@@ -529,17 +530,11 @@
  * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
  * the Bed sensor (-1) will disable bed heating/monitoring.
  *
- * Use the following to select temp sensors:
- * -5 : Cooler
- * -4 : Probe
- * -3 : not used
- * -2 : Chamber
- * -1 : Bed
- * 0-7 : E0 through E7
+ * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
  */
 #if TEMP_SENSOR_REDUNDANT
- #define TEMP_SENSOR_REDUNDANT_SOURCE  1 // The sensor that will provide the redundant reading.
- #define TEMP_SENSOR_REDUNDANT_TARGET  0 // The sensor that we are providing a redundant reading for.
+ #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
+ #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
  #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
 #endif
 

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -125,6 +125,12 @@
  #define PROBE_BETA 3950 // Beta value
 #endif
 
+#if TEMP_SENSOR_BOARD == 1000
+ #define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
+ #define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
+ #define BOARD_BETA 3950 // Beta value
+#endif
+
 #if TEMP_SENSOR_REDUNDANT == 1000
  #define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
@@ -224,6 +230,18 @@
  #endif
 #endif
 
+//
+// Motherboard Sensor options
+//
+#if TEMP_SENSOR_BOARD
+ #define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below.
+ #define BOARD_MINTEMP 8 // (°C)
+ #define BOARD_MAXTEMP 70 // (°C)
+ #ifndef TEMP_BOARD_PIN
+ //#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file.
+ #endif
+#endif
+
 //
 // Laser Coolant Flow Meter
 //
@@ -480,16 +498,20 @@
  */
 #define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
- #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan
- //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
- //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
- #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
- #define CONTROLLERFAN_SPEED_ACTIVE 127 // (0-255) Active speed, used when any motor is enabled
- #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
- #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
- //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
+ #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan
+ //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
+ //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
+ #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
+ #define CONTROLLERFAN_SPEED_ACTIVE 127 // (0-255) Active speed, used when any motor is enabled
+ #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
+ #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
+
+ // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
+ //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
+
+ //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
  #if ENABLED(CONTROLLER_FAN_EDITABLE)
- #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
+ #define CONTROLLER_FAN_MENU  // Enable the Controller Fan submenu
  #endif
 #endif
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -474,7 +474,7 @@
  * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
  * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  *
- * Custom / Dummy / Other
+ * Custom/Dummy/Other Thermal Sensors
  * ------
  * 0 : not used
  * 1000 : Custom - Specify parameters in Configuration_adv.h
@@ -496,6 +496,7 @@
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
+#define TEMP_SENSOR_BOARD 0
 #define TEMP_SENSOR_REDUNDANT 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
@@ -528,17 +529,11 @@
  * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
  * the Bed sensor (-1) will disable bed heating/monitoring.
  *
- * Use the following to select temp sensors:
- * -5 : Cooler
- * -4 : Probe
- * -3 : not used
- * -2 : Chamber
- * -1 : Bed
- * 0-7 : E0 through E7
+ * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
  */
 #if TEMP_SENSOR_REDUNDANT
- #define TEMP_SENSOR_REDUNDANT_SOURCE  1 // The sensor that will provide the redundant reading.
- #define TEMP_SENSOR_REDUNDANT_TARGET  0 // The sensor that we are providing a redundant reading for.
+ #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
+ #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
  #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
 #endif
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -125,6 +125,12 @@
  #define PROBE_BETA 3950 // Beta value
 #endif
 
+#if TEMP_SENSOR_BOARD == 1000
+ #define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
+ #define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
+ #define BOARD_BETA 3950 // Beta value
+#endif
+
 #if TEMP_SENSOR_REDUNDANT == 1000
  #define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
@@ -224,6 +230,18 @@
  #endif
 #endif
 
+//
+// Motherboard Sensor options
+//
+#if TEMP_SENSOR_BOARD
+ #define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below.
+ #define BOARD_MINTEMP 8 // (°C)
+ #define BOARD_MAXTEMP 70 // (°C)
+ #ifndef TEMP_BOARD_PIN
+ //#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file.
+ #endif
+#endif
+
 //
 // Laser Coolant Flow Meter
 //
@@ -480,16 +498,20 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
- //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
- //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
- //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
- #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
- #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
- #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
- #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
- //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
+ //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
+ //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
+ //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
+ #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
+ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
+ #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
+ #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
+
+ // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
+ //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
+
+ //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
  #if ENABLED(CONTROLLER_FAN_EDITABLE)
- #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
+ #define CONTROLLER_FAN_MENU  // Enable the Controller Fan submenu
  #endif
 #endif
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -474,7 +474,7 @@
  * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C.
  * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  *
- * Custom / Dummy / Other
+ * Custom/Dummy/Other Thermal Sensors
  * ------
  * 0 : not used
  * 1000 : Custom - Specify parameters in Configuration_adv.h
@@ -496,6 +496,7 @@
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
+#define TEMP_SENSOR_BOARD 0
 #define TEMP_SENSOR_REDUNDANT 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
@@ -528,17 +529,11 @@
  * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting
  * the Bed sensor (-1) will disable bed heating/monitoring.
  *
- * Use the following to select temp sensors:
- * -5 : Cooler
- * -4 : Probe
- * -3 : not used
- * -2 : Chamber
- * -1 : Bed
- * 0-7 : E0 through E7
+ * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7
  */
 #if TEMP_SENSOR_REDUNDANT
- #define TEMP_SENSOR_REDUNDANT_SOURCE  1 // The sensor that will provide the redundant reading.
- #define TEMP_SENSOR_REDUNDANT_TARGET  0 // The sensor that we are providing a redundant reading for.
+ #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading.
+ #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for.
  #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort.
 #endif
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -125,6 +125,12 @@
  #define PROBE_BETA 3950 // Beta value
 #endif
 
+#if TEMP_SENSOR_BOARD == 1000
+ #define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
+ #define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
+ #define BOARD_BETA 3950 // Beta value
+#endif
+
 #if TEMP_SENSOR_REDUNDANT == 1000
  #define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
  #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
@@ -224,6 +230,18 @@
  #endif
 #endif
 
+//
+// Motherboard Sensor options
+//
+#if TEMP_SENSOR_BOARD
+ #define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below.
+ #define BOARD_MINTEMP 8 // (°C)
+ #define BOARD_MAXTEMP 70 // (°C)
+ #ifndef TEMP_BOARD_PIN
+ //#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file.
+ #endif
+#endif
+
 //
 // Laser Coolant Flow Meter
 //
@@ -480,16 +498,20 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
- //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
- //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
- //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
- #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
- #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
- #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
- #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
- //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
+ //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
+ //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
+ //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled.
+ #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
+ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
+ #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
+ #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
+
+ // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
+ //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
+
+ //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings
  #if ENABLED(CONTROLLER_FAN_EDITABLE)
- #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu
+ #define CONTROLLER_FAN_MENU  // Enable the Controller Fan submenu
  #endif
 #endif